I have a toshiba 2400 s201 cd - dvd doesn't work outside windows

Similar Questions

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• I need Britannica 2012 dvd that will work with Windows 7

  I need Britannica 2012 dvd that will work with Windows 7. I bought Britannica Ultimate 2012 reference and install it in my Windows 7 pc, but the program refused to open every time I click on it. I troubleshoot my pc and it says that the program is not compatible with Windows 7 but compatitable with Window XP. So tell me how I can use this program in my window 7, or where I can download a free copy of work in thank you 7. Sage window 180

  I think you must contact Britannicaof the customer service

• Hi, I have acrobat adobe 6.0, but it does not work on windows 7, y at - it an available update?

  Hi, I have acrobat adobe 6.0, but it does not work on windows 7, y at - it an available update?

  To be more precise, it is not a question of Acrobat 6, having not been tested under Windows 7. We know that it does not work due to changes in the operating system architecture. The first version of Acrobat to all compatible with Windows 7 is Acrobat 8.1 (an update to Acrobat 8). The latest version of Acrobat (and the only one currently available for licenses) is Acrobat 11.

  -Dov

• I have PC toshiba laptop, my cd/dvd. writer does not read the CD software and not able to write the media__

  itshow msg

  Insert the disc pls

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• HP Pavilion Elite m9543uk: BDDVDRW GBC-H20L CD/DVD doesn't work does not, but is in the Device Manager

  BDDVDRW GBC-H20L CD/DVD does not work after update to Windows 10 Pro Windows 7 Pro this in Device Manager & this PC but when I double LK on this take a long time to load (it is called playing autoplay but does ' t), then it says Windows cannot access the specified device, path or file. You do not have the appropriate permissions to access the item (I am an administrator with full control).  When I RC on the reader a list of options come & I play the disk after a long wait. but it is very choppy can you please help. I also tested for all the bad guys, but I seem to be clean.

  Again thanks for the advice I will now roll back to Windows 7

• Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19

  I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!

  HEALED!

  
  
  All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :)

• I have a Toshiba laptop and my touchpad does not work any idea on how to fix

  touchpad does not work on my laptop, it is a toshiba...

  Hello

  Some have keys that turns off the pad and many Toshiba have card keys which have a control.

  Control Panel - mouse - Touchpad is here

  Panel of configuration-device - mouse and pointing devices Manager - double click on info pilot.

  If no joy go to Toshiba Support and download the latest drivers for your version of Windows and 32 or 64-bit.

  Go here and put in your info model and search for the drivers for your system

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  =========================================

  It's my generic how updates of appropriate driver: you mainly want to update or reinstall the touchpad drivers
  and ALSO to get the Toshiba value added Package for your version IF it is there.

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have a toshiba estudio pero 300 p Patrick don't con windows 7 no works

  me dijeron el productor're lexmark pero no encuentro los drivers para the Patrick h. correctamente y me can help thanks.

  Saludos.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  http://answers.Microsoft.com/es-ES/Windows/Forum/Hardware?tab=unanswered

• Envy 27-k: external DVD no longer works with Windows 10 update

  I get the message windows cannot verify the digital signature for the drivers required for this device. Up to present Microsoft and DVD manufacturer threw their hands.  Need help because I use this device on a regualr basis.

  Hello:

  See if do one of the troubleshooting steps from the link below solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• Many of us have FMS RC helicopter/plane controllers who do not work on Windows 7 due to a non-existent port. How can make us it work?

  Windows 7

  Hello

  What port are you looking for?  If the post is not there, you need more likely to buy a PCI card with th port type you're looking for.  USB port should be available.  If you are looking for a different type of port, you need to add an additional PCI Express card.  In addition, please check the with OEM of the controller to check if the device is compatible Windows 7.  I suggest you contact th OEM for extra support.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• After Windows Media Player 11 installation drive CD/DVD does not work

  Hello

  I installed WMP 11 via MS updated. The update done very well - but now the CD/DVD doesn't work. In "device management", the DVD is represented by a «!» I tried to update the device driver, but nothing has changed. Y at - it someone who has an idea?

  Ralf

  Hello Ralf

  The optical disk drive is listed in Windows Explorer?