OfficeJet 6000 E609n print on USB. I can't make it work wireless
HP Officejet 6000 E609n Win 7 64 bit
My printer works on a USB connection, but I was not able to do
function on a network wireless router connection.
Router is Linksys WRT160N V3.
I used all of the solutions recommended in the instructions from HP.
OK, since you get the error "the selected printer is not present." during installation, here are a few troubleshooting that should help you narrow down the cause and resolve the problem:
The printer is not found during Network Installation in Windows
Tags: HP Printers
Similar Questions
-
HP Officejet 6000 E609n series 'disorder with detected printer.
Original title - HP Officejet 6000 E609n series
Printer does not print. Connected to the network - ok. Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list. Printer agrees and sends the sheet of paper through but it comes out of the Virgin. This s the only printer on the network and is set as the default printer.
Hello
1 did you changes to the computer before the show?
2. what operating system you have installed in the computer?
The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.
Method 1: Run the fixit:
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 2: R the print spooler service and delete the print queue
Start the print spooler service in the Services console
1. click on Start, clickrun, type services.mscand click OK.
2. right click on the print spooler service and then clickstop.
3. right click on the print spooler service and then clickStart.
Start the spooler service for printing at the command prompt
1. click on Start, clickrun, type cmdand then click OK.
2 type the following commands at the command prompt:
net stop spooler
net start spooler
OutputNote: Press ENTER after each command line.
Cancel printing
http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing
Method 3: Follow the steps in the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 4: Delete and add the printer and then check.
Add or remove a printer (Applicable for Windows 7)
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.
-
OfficeJet 6000 E609n: HP Officejet 6000 does not connect wireless modem.
I have Windows 8.1. My HP Officejet 6000 wireless printer E609n worked well, until the modem is dead and a new one has been installed (new address). I need to know how to recognize the new network address. (Note: I tried to install the original installation software, but the CD would run under Windows 8).
Hi @indyham
You can use the following link to download and install the full software functionality for Windows 8.1; Printer wireless HP Officejet 6000 - E609n.
I hope this helps.
-
Whenever I turn on the Officejet 6000 E609n wireless printer prints an alignment page. How can I stop this?
I tried aligning the printhead from the control panel and that does not stop the problem. After that, I thought I'd try the box alignment tools of the printer but could not find it. When I tried to go to the HP Solution Center, all I could get were geographical locations. Also did not try the third method to align the print properties.
From the center of solution... Follow the same steps to print a clean printhead... but this time to print a quality report...
-
For officejet 6000 e609n driver not installed
I installed the full driver for Officejet 6000 e609e and windows 7 says not installed with an error code 28 driver for officejet 6000 e609n.
I solved the problem yesterday and posted my solution to 17:25 - my solution is somewhat against HP installation method (I think). I have a small wireless network and the printer is shared. Here is my solution, but I would like to thank you for having responded.
It may be wise to reboot before continuing the installation process.
Make sure that your printer is on (on).
Access your installation from a CD, file or elsewhere and starts to run it.
- Click on 'add a device '.
- Choose "wireless 802.11 network connection" or one of the other two choices as adapts to your situation.
- Select your printer by clicking it.
One solution presented by Hsquared
-
I have the network... USB inventel wireless adapter but I can't make it work on Vista home basic, my pc can't find or install the driver required for this, all I get is a saying of the screen, the Cohiba 3887 rev0 necessary... But it worked on my Win XP can someone help?
original title: Cohiba 3887 rev0http://www.google.com.au/search?hl=en&q=Cohiba+3887+Rev0&btnG=Search&Meta=
Have searched through a lot of places, but can't find any mention of Vista drivers for your hardware.
Have you tried to contact the manufacturer in this regard?
If XP drivers do not work in your Vista machine, and no driver available Vista, time to buy a new.
See you soon.
Mick Murphy - Microsoft partner
-
Inkjet printer Lexmark x 5470 I can't make it work
I did a clean install of windows 8 for my Toshiba Satellite laptop. I have an inkjet printer Lexmark x 5470 I can't make it work. I downloaded the compatible with windows 7 32-bit driver, but I am unable to get the printer to synchronize with the driver on my Windows 8 operating system. Tounsiiaa you for your answear.
Thanks for your help. Given that my printer did not work well in Windows 7, I was looking for the right driver for Windows 8 and asked for help. In the end, I tried a driver that is on the CD original and successful to my surprise. Everything works better than Windows 7 thanks anyway for the help and suggestions.
-
I tried to install jk1351 plotter cutter drivers but just can't make it work.
Original title: jk1351 cutter plotter usb drivers
can someone helo I tried to install readers, but just can't make it work no matter what idears
Hello1. what operating system is installed on the computer?
2 is this mentioned USB-specific problem?
3. were you able to install the drivers successfully?
4. what happens when you try to run the cutting plotter?
Note: Try again with different USB ports and see if that helps.Method 1: Follow the article if you have Windows 7 computer.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: You can also try to check with the manufacturer and see what they have to say on this. -
I downloaded the SRT managed hosted IP Assistant Toolbar 17.4.86.1 and I can't make it work on Firefox. It is said he is completely compatible, but I downloaded it like the instructions said and it will not show as an option of the toolbar for Firefox. Please help and I try not to use IE at work we run XP. Thank you.
I'm surprised companies still use XP. My old school already spent 8.
In fact, if you are having problems with the addon/extension, you'd better wide asking the developer about it, given that Mozilla neither we volunteers don't have nothing to do with the extension works do not. I suggest a Safe Mode to see if this addon is in conflict with by another addon, but I don't want to give you wrong steps.
If you want to try Safe Mode, do not hesitate:
- Windows/Mac: choose Help > restart with disabled modules
- Linux: run firefox-safe-mode in the Terminal/Konsole
If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.
-
In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?
No more. It merged with the Apple's music.
-
Original title: sim set up
I have acquired a dell inspiron duo and have place the sim card in the back according to the instructions, but can't make it work
Hello
You can buy a WWAN card to use a SIM card. You should also call your mobile service provider and check with them.
Similar question has already spoken here: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/how-to-make-the-sim-card-work-in-studio-15-dell/4507610a-e4aa-4bfd-9e94-ed71a60ad550
-
Hi JamesAthanassiou,
What is the exact error message that you receive when you try to access Outlook Express 10?
You can try to repair Outlook express and check if it helps:
An Outlook Express basic repair kit
Reference: OLEXP: Outlook Express stops responding and your pointer appears as an hourglass
Hope the helps of information.
-
I would like help with my web cam, I can't make it work. Can someone please tell me what to do?
Hello
-What is the serial number and model of the webcam?
-Is the webcam compatible with Windows XP?
-What is the status of the webcam in Device Manager?
-You get an error message?
-Have you installed the latest drivers for webcam for your operating system?
-Is the issue relevant to a particular application?Please see:
How to manage devices in Windows XP -
I installed adobe flashplayer several times now and can't make it work I can do
I keep trying to install adobe flash player, uninstall and try again and can not make it work. An older version, used to work. What should I do?
Hello
It's all the tips we can give you
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
Hi I have a laptop Toshiba Satellite with Windows 7 and its updates. I tried to upgrade to Windows 10 several times and I just can't make it work. After pressing the race it stops just to do something. Does anyone have any suggestions?
Tom
Hello
You can try out it by going to the link below, click on upgrade now and follow the instructions.
This tool checks your computer before starting the upgrade.
https://www.Microsoft.com/en-us/software-download/Windows10
before you perform the upgrade, I suggest that you back up all your important files on an external drive or a drive.
Maybe you are looking for
-
How to transfer messages from my Android on my computer?
Hello, I need to save all my messages texd to my Android phone to my computer, I tried a lot of methods and tool and has no backup, please suggest an effective method, thank you.
-
Toshiba still 2 write - when they are available in the United Kingdom?
I'm desperately looking for a tablet of budget / 2 in 1 laptop that will allow me to take decent notes with a stylus. The Surface Pro 3 is beautiful but out of my price range at that time. The Toshiba Encore 2 write is available in the United States
-
Is there a choice of 64-bit or 32-bit on Toshiba Recovery?
Hi everyone, I have I just got myself a nice new Toshiba (now my 3rd) and have the delights of Windows 7 to play with... Model is Satellite Pro L670-18E Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) 64-bit has been pre-
-
opening attachment hp compaq Windows 8.1
I'm not too hot on my laptop because of my age, I guess. I hope someone can help. Don't know what I did wrong, but Although previously, I was able to open attachments to my e-mails, all of a sudden I can't. I have rec'd an attachment which is a PDF i
-
Selecting a list item in a list view
It is best to highlight a selected item or for a border around the element to appear (as I have noticed when I deploy my application)? )