I have LR6 (not CC) on my iMac. Now have a new macbook pro. How in me device new LR6. Thank you

Similar Questions

• I have installed Firefox in French; how he switch to English? Thank you!

  I have no further details, I think is a simple question...

  Rachel

  If you have the user interface of Firefox (menu bar) in the wrong language or want to change the current language, then you can get Firefox in the language of your choice here:

  • http://www.Mozilla.com/Firefox/all.html

  Uninstall the current version of Firefox, but make sure that you do not remove your personal data.
  
  Install the new version of Firefox to the language you want.

• Hello, I currently windows 7 Home premium 64-bit running on my laptop, can I install windows 7 ultimate 32 bit over this as an upgrade? I have the ultimate disc then, how do I use it? Thank you, Mark.

  I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.

  No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Cases of failure to upgrade Express:

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Cannot open e-mail messages. MSG, it's that there is no program associated with this file and define and association. Have no clue as to how or what program choose. Thank you jp__

  problem is email

  I assume you are talking about email attachments.  Each attachment has a three-character extension that associates the file with a program (in the start menu / default of programs / associate a file or Protocol with a program and then scroll through the list for the three-character extension).  Many are well known (.doc for Word Documents) and .pdf for Adobe Reader documents, but some are not so well known.  Some are also used by several different programs is sometimes important to know what program created the file in order to know what program to associate with her.  Your best bet since it is emails is to ask the sender to you say the name and version of the program so that you can install a program that can at least find out if is not working with the file if you do not recognize the extension.  Some attachments to e-mail are not intended to be read and there are programmatic reasons and must not be opened (but I can't give you a list of all of them - barely know they exist).

  Sometimes you can google the extension (for example, google .avi http://www.afterdawn.com/glossary/terms/avi.cfm) and a link arises which will tell you what programs can do the file type and which programs can read or work with the file type (or you may need to go to other links to get this reversal - in this case a lot of programs can open the file because it is a very common file for which many different programs have been developed - program that it becomes irrelelevant).  If it's a single program, so you know what you need.  If more than one program, you must the sender to tell what program you used to create the file unless the .avi file that can be read by the host (or you can guess or try different options until you find one that works but this can take a long time, can damage the open file with wrong program and can be expensive if you buy one of the programs that you are testing).

  In fact you do not define an association.  When you install the program, the extensions it can handle are identified by the Setup program and included in the listing file associations.  In fact, there is no way to add an extension to the registration of the association - you can change the programs that are used by the extensions in the list by default.  Some extensions are added automatically by Vista when installed and work a little differently than others (for example, .lnk or .exe), but we don't need to go into that, unless the extension you are having problems with is one of those (you don't mention the extension so I can't give you advice).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  I use the MAIL function on my MacBook Pro. I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  What do you mean 'all messages '? all mail entering, or email any or all all. ?

• I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine.

  I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine. To explain in more depth. As the computer boots the apple logo flashes off the coast and then turn it back on and finishes loading. It doesn't seem to be any questions I want to just make sure because I just bought this mac.

  It is booting normal up -.

• Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Hello

  Please see error "Licensing has stopped working". Mac OS

  Kind regards

  Sheena

• I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  Hi Robing12544083,

  Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  Compatibility: Adobe - Creative Suite 5 Master Collection: System requirements

  I hope this helps.

  Concerning

  Megha Rawat

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• I have usef to operate only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  I used to work only on PC, but now I have this 2009 macbook Pro.  He had a record of 7200 RPM... but he died... I want to put a hybrid SSHD on it... will it run slower?

  Several years ago I tested both a hybrid version Seagate 1 and later version 2 with my 13 "2009 MBP and the computer started more quickly with one of these drives with 7200 RPM drive. But that and save files were the only time where I saw an improvement of high speed. So no, not slower, but not really all that much faster. I ended up installing an SSD in the computer. Now that was an improvement.

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• I need Windows 8 to a class. I have 7. Can I buy and download 8 online? Thank you.

  I need Windows 8 to a class.  I have 7.  Can I buy and download 8 online?  Thank you.

  Hello

  Support for windows 8 is finished.

  Extended support for Windows 8.1 going until 2023.

  But Microsoft sells more than 8 or 8.1.

  Try Amazon.com, etc.

  @@@@@@@@@@@@@@@@@@

  Do the following before upgrade you to Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  To my knowledge there is not anyway, unless start you numbering at 500 the number. It is an option in the export dialog window.

  

• Why the sound does not work in Windows 10 with BootCamp installed on MacBook Pro mid 2012

  So, I recently had a mistake huge hard drive, then I formatted the drive and installed Windows 10 I downloaded the BootCamp 5.1.5621 software (which is the version for this computer) and my audio didn't work. I've used Windows 8.1 in the past without Activation, but that was a few months ago. I've deleted it 2 days after I put it on the computer, but all drivers well worked out there. Although I plug in a USB headset and audio installed and worked fine! Help, please! I even reinstalled BootCamp!

  I have the same Macbook Pro 2012 with boot camp and dual boot Windows-10 and Sierra.

  Everything works fine. I think you have the wrong boot camp files.

  I think that you need version 6. Reconnect to OS X and run the boot camp assistant and try to download new files from boot camp.

• I have a 2012 macbook pro 17 ", which is the newest operating system for this?

  I have a 2012 macbook pro 17 ", which is the newest program operating for this?

  El Capitan

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?