I have my computer to factory start .i purchase reted in 2007 windows xp sony vaoi now its slow
Hello I have a sony vaio windows xp from 2007, I had problems with it so I reset factory, it seems it came with windows 5.1 service pack 2 and internet explore 6.0my question is my netflix and tube you are super slow what I need update please help me in detail appreciate.i have my update but its seems I need to down load something for her because she could work well
Signs of punctuation. It's not just for magazines and newspapers and the large bound heavy books... ;-)
I think what you're saying is that you just restore a system to the factory settings (_ Edition with Service Pack 2 of Windows XP) and you need to know where to go from there.
Well, first of all, you should get this system on the Internet. Chances are it's already infested/infected - as you probably don't have any antivirus. You can restore you to factory AGAIN find.
Assuming all is well, however, obtain and install the Service Pack 3. Service Pack 2 Windows XP is no longer supported.
Once installed SP3, start checking the http://windowsupdate.microsoft.com/ Windows Update and install at least everything essential/priority. It will take several reboots and many result from this web page. No update of the material must be installed.
Download your application antivirus installed and updated.
Upgrade to at least Internet Explorer 7. Internet Explorer 8 would be better.
Install all of the latest versions of the Internet plugins, you are likely to need (Adobe Flash Player, QuickTime Player, Microsoft Silverlight, etc.).
Make sure you run with SP2 for a certain amount of time (and perhaps no antivirus) not infected / infested your machine:
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
Tags: Windows
Similar Questions
-
My desktop willl computer does not start after a few updates via windows 7.
When you start the computer displays this message; compressed dotmgr press center alt delete to restart.
The only thing I can do is continue to start and restart my computer. What can I do? This happened to anyone before?Please refer to the section 'Standard steps to solve most boot problems' by the following Internet link:
http://support.HP.com/us-en/document/c01884928 -
I have a computer laptop compaq 6820 s can I upgrade to windows 7 pro
I have a Windows 7 Pro 32-bit disk
My compaq 6820 s will accept OS of ths
Hello
It is not listed on the HP support page - see here.
You can download and run adavisor to upgrade Windows 7 from Microsoft on the link below to see if there are actually problems preventing the upgrade.
http://Windows.Microsoft.com/UpgradeAdvisor
Kind regards
DP - K
-
I have a computer laptop dv6-6167tx and I just wanted to ask if I could update its graphics.
Product: Hp pavilion dv6-6167tx
OS: Windows 7 64-bit
Memory: 4 GB
GPU: Radeon HD 6490M
Hello
Unlike desktop computers, graphics upgradding on the laptop is not easy as walking in a park, difficult, expensive, or even impossible depending on how we look at it:
(a) for the graphics card (including integrated card) which is welded to the montherboard/system board, we can just say: buy a new machine.
(b) for the graphics card dedicated: basically we can but find map MXM is one thing, the upgrade of cooling system is another thing, and this may required more power to the power supply... Total cost could be equal to buy a new machine.
Hope it makes sense.
-
Restarted during the update of windows, computer will not start correctly
I recently formatted my computer and reinstall all updates. Recently, I accidentally shut down the computer during the beginning of an automatic update. I restarted the computer and it starts up to the circle of windows vista, made some noise, but then the screen flashes and turns off every 5 to 10 seconds. The hand sign and a symbol of loading can be seen through.
In addition, the sound stops for a moment and then continues. It seems broken.I did restore the several points system and system repair, and nothing helps. System restore failed and system repair said everything was fine.I recently formatted my computer and reinstall all updates. Recently, I accidentally shut down the computer during the beginning of an automatic update. I restarted the computer and it starts up to the circle of windows vista, made some noise, but then the screen flashes and turns off every 5 to 10 seconds. The hand sign and a symbol of loading can be seen through.
In addition, the sound stops for a moment and then continues. It seems broken.I did restore the several points system and system repair, and nothing helps. System restore failed and system repair said everything was fine.=======================================
You try to run Safe Mode system restore?Windows Vista - start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAlso try the last known good Configuration.
Windows Vista - using the last good known Configuration
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration -
How to remove Windows 2000 computer that is configured as a dual boot with Windows XP?
Original title: I have a computer that has installed addition family XP Edition and Windows 2000.
I have a commputer who has family XP Edition eidiion and Windows 2000 installed. At the start, I have the choice of the operating system I want to work in. I would like to delete the Windows 2000. How can I remove Windows 2000 without corrupting the XP files. How should I proceed.
Thank you.
Hi DonnaAndrewsM,Follow the steps in this article to remove Windows 2000 from your computer without affecting Windows XP. -
Desktop runs Vista. Stopped working after the Firefox update last night. It will not start up.
This morning updated Windows 7 netbook. Now netbook freezes.Please update your browser Firefox 8 and check
-
I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help
1. did you remove Bootcamp using disk utility?
2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.
-
Original title: the battery starting
I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?
Hello
Check with support from Acer.
Acer - USA - Service and Support - drivers
http://us.Acer.com/AC/en/us/content/supportAcer - worldwide
http://www.Acer.com/worldwide/selection.html===================================
Other information that might help:
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I restarted my computer to factory settings.now I have no XP sound.windows
I restarted my computer to factory settings.now I have no XP sound.windows
Either:
* use the CD/DVD that came with it to install the (outdated) audio drivers
or
* * aller to go to the site of the manufacturer of your computer, look for the support page for your unit and download the latest audio drivers a from here and install it.
See you soon,.
Jerry -
Original title: MAC to PC NETWORKING.
I added my Mac to my PC network workgroup. I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.
Hi markymo777,
I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.
Hope the helps of information.
Please post back and we do know. -
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please
Hi Alan,
Thanks for posting your query in Microsoft Community.
I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;
- How do you run the Startup Repair?
- Do you have Windows 7 repair disc?
- Remember to no particular change in the computer before the show?
- Have you plugged an external equipment, except the keyboard and mouse?
- You are able to start the computer in safe mode?
- What is the brand and model of the computer?
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.
If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.
If you haven't tried using Windows 7 repair disc, you can try the following:
1. Insert the Windows 7 disc
2. restart your computer
3. When asked if you want to boot from your DVD player, do it.
4. Select your language, click Next.
5. click on repair your computer
6. Select the operating system you want to repair.You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.
Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.
I also recommend to contact the computer manufacturer to get the done diagnostic equipment.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
WHY DON'T I HAVE TO PRESS F1 TO START THE COMPUTER?
WHY DON'T I HAVE TO PRESS F1 TO START THE COMPUTER?
We could not tell you, it's a function that is located on the computer itself, only not part of the Windows operating system. However, this means that the computer has a failure any and he's trying to tell you about it. What does the screen say?
-
I had to restore my computer to factory settings, which means I lost PS Elements 10 I bought a few years ago. I have a serial number, but when I tried to install it I got the message "the game archive file of 10 items is missing.» "You must all parties." Any ideas.
who says good enough.
you need BOTH the exe and 7z files. put them both in the same directory and double-click on the exe file.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
Maybe you are looking for
-
iOS 10.0.2 links open in safari not apps
I have an iPhone 6 and just go to ios 10.0.2. Links to connect to applications like youtube and Instagram are open in Safari instead of in their respective applications (as they have since at least ios 8). However, they take the extra step to go thro
-
When I open firefox I get the following message: could not open the file failed to load the address book file history.mab mab I can delete this message and continue to use firefox, but must remove it until I can move forward. Any suggestions to fix t
-
What function key should I use for the option about bootcamp
Function key WWhat should I use to open option of bootcamp
-
I have a HP mini 1151nr 1000 with a BIOS password that prevent the operating system system halt loading code is CNU9137KB if anyone can generate a master password for this then jemti would appreciate it. Help, please.
-
TRIE to deleate the numbers