I have problem with using a new method of saving (export?) in Photoshop.

Similar Questions

• I have problems with my audio new laptop second hand when I plug in external speakers, it's as if some of the sound is missing. Can anyone help?

  Problem: Sound is missing for example hand singing on a piece of music.
  Laptop: Compaq Presario C700/C731TU
  Sound: High Def Conexant Smart Audio 221
  Version 4.42.0.50

  I tried updating the driver and also searched through preferences and settings but have not found a solution, this is the first place where I've been since then. IT all works very well by means of edge speakers, but even a standard set of headphones seems to miss her.

  Thanks for you suggestion, I did since then and he said that everything was working fine. I also tried a number of other suggestions from other sites, without success. I then went to do a physical inspection and when I unplugged the audio cable I noticed that the ring of metal around the entrance of my helmet was missing, I told the person, I bought the laptop. Fortunately he found on his ground, not knowing what it was and put it on the side of "just in case". I have re-installed and the whole works fine. So if someone else is reading this and is not able to resolve a similar audio problem with something to do with the software, look at the finer physical details. It could be as simple as that.

• Anyone else have problems with the unethical choice to use the word "updated"?

  Does anyone else have problems with choosing the unethical to use the word "update" when what is going on is an UPGRADE that requires of new licences and payment?

  "updates" don't involve payment, make "improvements".  Given that you posted in the forum of creative cloud, if you have a subscription paid and that you are asked to pay more than the cost of the subscription it is more likely a problem with your installation/account.

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  Go install the updates to Photoshop CS5 - you have not installed one any of them, and the first update solved the bug of printing that you are experiencing.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows 7 laptop. I have problems with my cursor. When I type, it jumps and anywhere else except where I type moves.

  Hello:

  I am pleased to say that I have really only one problem left to solve.  I have a Dell Inspiron N5010 with Windows 7.  I started having this problem immediately about two or three weeks after the purchase of this computer.  I have problems with my cursor.  A Laptop store owner who corrects laptops told me ' you type you're probably hit a key that throws the slider out where you type and be aware of this.  I really don't think that.

  Is that the problem is that whenever I type just arbitrarily the cursor jump to other sections of my screen where I previously typed something.  It's very frustrating.  Can you really fix that because a tech support person told me that "which cannot really be fixed with someone to take control of your computer, or there is a problem with the keyboard".  That's what he says.  "It could be a problem with the keyboard" and he concluded that it might have to be taken in a store or (sent to DELL (and I say no, no, no (Amy Whinehouse)).)  A lot of smiles.

  But in any case this problem can be corrected as any other problem?  I hate it when this cursor jumps around on the screen to the typed sections previously.  It does not have it on my desk.

  Please let me know.

  Lavenderjade

  Hello

  1. the problem occurs with any particular application or all applications?
  2. don't you make changes to the computer before the show?

  Method 1
  The issue may be due to some third-party program conflicts. I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest that you try to reduce the sensitivity of the touchpad and check if that helps.

  a. turn on your computer and log in to Windows as usual. Open the "Start" menu and click on the "Control Panel" option.

  b. double-click the icon named "Mouse"... The "Mouse properties" window opens. Go to the tab "device settings". Click on the button "settings". A window titled "Properties" appears.

  c. examine the left panel of the 'Properties' window and expand the option "sensitivity." Click on the option "Sensitivity to touch."

  d. reduce tactile sensitivity in moving the slider to the right, to the label of "heavy touch. Experiment with different levels of sensitivity until find you one suited to your needs.

  e. click the 'OK' button to close the "Properties" window Repeat the operation with the control panel "mouse". Your new touchpad sensitivity settings are now saved.

  Method 3
  I suggest you to update the drivers for the touchpad on the manufacturers Web site.
  http://www.Dell.com/support/drivers/us/en/555

  More information
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

• I have problems with my subscription to Adobe Stock.

  I have problems with my Stock of Adobe account. I tried to update my account for the past few weeks after getting my new debit card, once I noticed that 2 of my stock payments didn't cross it. (I was not on the stock of recent times) I've updated my card, he said thank you, now you can use your account... but it is always as I do not have. I contacted the chat and it reactivated my account charged $ 8,81 on my account and he said: I'm in charge again on 13 February for monthly salary. I even got an email saying that my account has been reactivated. When I went to concede a photo, he brought me to a new page to 'buy' the image, subscribe, ect... as if I don't have a subscription. I had Adobe Stock since last August and should have flight path so pictures since I have only licensed 25 of 40 images. These do not show either. I even tried to buy the week last with her still pending at Paypal. She wanted me to pay $10 plus ($49,95) to subscribe to a photograph of annual Adobe + stock, even if my last year does not expire until April. Certainly feel frustrated here. Is anyone having problems with the subscription?

  Hello

  The distribution of your Stock has been updated.

  Kind regards

  Bev

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.