I have problems to open bmp files with paint.

Similar Questions

• Open the file using paint .bmp, it no longer works.

  Original title: how?

  Greetings...

  today I open a .bmp file with paint... and now this file does not work... I want to this: http://prntscr.com/4d0gf8

  I know that this is not cause of bmp I can't open bmp like that... means to bmp file restoration paint with this? Thank you.

  Grinch,

  Try to restore the file associations using the registry mentioned in this link

  I strongly recommend allows you to back up the registry or create a restore point before you perform the steps

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Note: the above proposed software is for your help. It does not concern me, nor I recommend to use.

  If you want you can scan the computer antivirus using free scanners or create a new user account and check

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I get this error when I try to open a file with Acrobat Reader, it is said: Adobe Reader could not open "heels 2014 001.bmp" because it is not a type of file supported or because the file has been damaged (for example: it is sent as an email to)

  I get an error msg when I try to open a file using adobe reader software.  Error States: Adobe Reader could not open ' heels 2014 001.exe bmp because it is not a supported type, file or because the file has been damaged (for example: he was sent as an attachment to e-mail and has not been decoded correctly.).

  
  

  I tried to send an email with attachments 44 and would not send the email. Ever since I tried to send this e-mail, I have been doing the error msg.

  
  

  Anyone know how I can get this to work for me again?

  
  

  Thank you, any help is greatly appreciated.

  
  

  JoJo

  The file you are trying to open is (you can see from the name) a BMP, PDF files no file. Adobe Reader can only open PDF files, just so stop trying to open it with Adobe Reader. The app, users of Windows for BMP files is painting.

• I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image.

  Original title: HELP! Problem 'open with '.

  I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?

  Hi Patti Gunderlock,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

   

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Method 2: If the method above is not enough, then you can follow the steps described in the article and check.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Let us know if that helps.

• When you try to upgrade Windows Vista to Windows 7, I got this error message "do not have permission to open the file. Contact the administrator. »

  I bought Windows 7 two years to upgrade my Windows Vista laptop. The upgrade went well. In November, my hard drive reported a failure to come so I took it to a technician to replace my hard drive and reload everything. I didn't have the product key for W7 so they have recharged to factory install WVista. Last night, I bought another copy of W7 and installed. When the time came to 'Unpack the box' I got one "don't have permission to open the file. Contact the administrator. "message. I found a solution in a post since 2009 and followed the instructions to the command prompt: sfc/scannnow. The scan came back with no violation of integrity. I don't know what to do now.

  original title: hang up administrator permissions.

  Right-click on the configuration, the exe file and select "run as Administrator".

• I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs. How can I change them back?

  I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs.  How can I change them back?  I use Vista and have little knowledge of computers but I can follow directions.  Thank you

  I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs.  How can I change them back?  I use Vista and have little knowledge of computers but I can follow directions.  Thank you

  Try this simple tutorial. No guarantees.

  Restore the file type associations:
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions in #1 à #7 at the top.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions in #1 à #7 at the top.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows to use a specific application to open a file with a MCD.

  Original title: "open with" application "Choose default program" Cancel

  I accidentally changed the icon and the program using the "open with" application "choose default program" to the word instead of VectorWorks. The central database file can still be opened by the program. However, I can't find the program or its icon on the 'recommended' or 'Other' menu programs even if the program is located in my folder "Program Files". How to cancel the global setting or that the program "open with" to recognize the program?

  Hi John,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you want Windows to use a specific application to open a file with a MCD. Please correct me if I misunderstood.

  John, I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Please follow the steps mentioned in the article to set the default application.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• CS4 opens unchanged file with the changes made to the different registered file

  OK, I searched for this but can't find anything. Probably because I don't know what is happening. (1) I opened a file from a CD raw in photoshop cs4, lets call it photo1.nef. (2) I saved the file under a different name on my HARD DRIVE after changing, photo1b.tif. I have not to form any save the file on the CD (cannot in any case). (3) now, everytime I open the original file, photo1.nef on the CD it opens with all the changes I've done previously for the file is saved in the photo1b.tif form (remember that this is the original file unchanged but not the file, I changed). But when you look at the pictures it seems to be the same version of the file. I closed photoshop and it deleted all my temporary files, and still, it opens the file with the changes, even if other programs open the file in its state of origin without any of my changes. How can I stop this? I think I can go nuts on it! Help! My wife is laughing at me when I show him.

  Looks like you may be using a cache for your Camera Raw settings (and not the XMP sidecar files).  Check your preferences in Camera Raw or make an edition > Camera Raw preferences of the bridge.

  You should be able to clear the changes by right-clicking on the image in Bridge and selecting parameters develop > clear settings.

  Only Adobe programs will use these changes by the way.  This is why open the file in other programs does not display them.

• Compaq 15 laptop: I have problem to open windows 8 I do not remember the email from Microsoft outlook

  I have problem to open windows 8... I don't remember the email from Outlook... and I can't open the windows... the computer is Compaq 15 Notebook pc

  Hello @djgenti,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the question of password and he wanted to help!

  First of all, please consult the following document and let me know how it goes:

  HP computers - what to do when you forgot your connection password (Windows 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• How to open a file with a .wsx extension

  Original title: .wsx extentions?

  How to open a file with a .wsx extension

  Hello

  Where did you get the .wsx files?

  Please use your favorite search engine to find a program that can open the .wsx files.

• How to open a file with a .bar extension?

  Anyone know how to open a file with the .bar extension. I can't seem to find a way, and I get junk out of the web says that opens the file, but I find myself with toolbars and other things I don't need or want. Any help would be great. Thank you.

  On Sunday, February 12, 2012 21:12:54 + 0000, KevinAmosMDK wrote:

  Anyone know how to open a file with the .bar extension. I can't seem to find a way, and I get junk out of the web says that opens the file, but I find myself with toolbars and other things I don't need or want. Any help would be great. Thank you.

  See http://filext.com/file-extension/bar and note that
  http://FILExt.com/ is a very good place to look for answers to
  questions like this.
  Ken Blake, Microsoft MVP

• Whenever I try to open a program I get a message "choose the program you want to open this file with.

  Hi, whenever I try to open a program, I get the prompt and a window asking to to choose me a program to open this file with, I recently added mcafee and now when I click on the icon and other icons on the desktop, it invites this window, could he be bound, what can I do? Help!

  Hello

  Try the system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Its control panel - backup and restore center - left upper repair Windows

  SO which opens also to use the below to execute.

  Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN

  or use start - computer or Windows Explorer to navigate to

  C:\Windows\System32\rstrui.exe

  Top - right click RUN AS ADMIN

  =====================================

  To run a particular program until get them you all back to the normal fair use start - search and type in the
  program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
  program, and run it from there.

  Define your main program associations, and then you can edit any type of file to the correct program.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.