Satellite L40-139 and Midi interface

Similar Questions

• I have Satellite L40-139 and need to restore the factory settings

  The problem is, that the recovery of the program disk does not open automatically and even hold down F8 at the beginning upward does not work as I get another page to the screen showing the details of American Megatrends and no option to return to factory setings.

  Any ideas how I can get around this? This page has only been for about a week.

  Thank you

  I don't know what you're doing exactly, because it automatically start confuses me, and I do not understand you exactly.

  Before discussing the installation of recovery, I would like to know what you are doing exactly.
  You try to start the installation of the OS on the procedure of recovery DVD or disk HARD recovery using F8 and disturbances of my computer?

• Satellite L40-139 and WXP - how an audio device to work?

  I recently reinstalled Windows XP on my laptop and after having managed to download the drivers for my wifi video ect I arrived to the sound I have downloaded the driver but it still does not that my laptop doesn't show any recorded audio device. How can I make them work?

  That's what I see when I got to his http://i47.tinypic.com/25u04ds.jpg

  Hello

  On Windows XP, you must install the two updates for your sound card:
  AUDIO Patch1: Http://support.microsoft.com/kb/835221 KB835221
  AUDIO 2 Patch: KB888111 http://support.microsoft.com/kb/888111

  Alternative you can install SP3 because it contains these patches!

  But before installing, remove the current sound driver. The driver must be installed after Windows updates.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Question about the battery life of the Satellite L40-139

  It's maybe a stupid question, but I have a portable Satellite L40-139 and the battery lasts less time, is this correct.
  In the power management, I chose energy-saving. I used to be a mobile system and it could take 2-3 hours. The answers would be great.

  The laptop uses Vista. Am I wrong?
  Well, I don't wonder that you can run Notepad only for an hour approximately.
  Vista needs for more resources as a BONE at the beginning. In addition, there are a few bugs in Vista, who have a bad influence on the performance of the battery!
  You can perform a search in internet for Vista and the problem of battery on laptops and you will find a lot of information.
  The same laptop with XP runs twice as long on battery as with Vista.

• What card Firewire works with Satellite L40-139?

  I have Satellite L40-139 under Vista Home Premium.
  The laptop doesn't have a Firewire interface. He has a 54mm Express card slot. I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs.

  Although there are a lot of these cards on the market, there are also many stories of them does not not with Vista or some Toshiba laptops.

  Can someone advise please a card that is known to work with the L-series and with Vista?

  Thank you in advance.

  Hello

  > I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs

  This is right.
  Satellite L40-139 supports ExpressCard location and so you can use an Express which has been equipped with a firewire interface card.

  You should google a bit, there are a lot of offers on the internet

  For example something like this:
  [Express Card + Firewire ports | http://ecx.images-amazon.com/images/I/31%2BkULZc2gL._SS500_.jpg]

  See you soon

• Cannot run the CHKDSK - Satellite L40-139 process

  When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
  He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

  I was wondering if someone can help me correct what I want to start the whole process.

  Thanks in advance.

  Hello

  You can run chkdsk after Windows has started.
  Type in the CMD COMMAND.
  The console should open and there you can use the command * chkdsk *.

  That's all.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Audio drivers for Satellite L40-139

  SOS,
  For the last 3 weeks I'm searching the Internet to find:

  * Sound drivers for toshiba Satellite L40-139 *.
  Toshiba even does not have.

  CAN someone HELP Sound drivers for toshiba Satellite L40-139 please.

  Thank you

  Hello

  Are you sure that Toshiba does not provide drivers for this laptop model?
  I think you are wrong buddy.

  Have you checked the Archive box on the European driver Toshiba page?
  I found the series Satellite L40 PSL40E and L40-139 belongs to this series

  There are all the drivers for this device

  It is interesting to check this new ;)

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• Satellite L40-139 cannot boot from CD

  I have a Toshiba Satellite L40 - 139 that comes with vista installed!
  A month ago, I installed XP and it worked well!

  Yesterday I had to reinstal XP and I chose clean instal CD and an installation process, I pressed the button to open the dvd player and you finish her!

  Stupid mistake! From there if I try to boot Windows from a dvd player and the process stops at: check the configuration of your hardware! - and white screen!
  Nothing happens!
  What can I do?

  Evrything else seems to work ok!
  There is no problem with dvd player, because he reads a recovery for vista CD!
  Help, please!

  This is a really silly situation. I'm sure that this info on the suspended installation is recorded in the MBR. I recommend you do the drive clean HARD everything including MBR.

  After this try to reuse the CD of Windows XP Home edition installations.

  Good luck!

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Cannot use MS Paint tool - error with Vista on Satellite L40-139

  I recently reinstalled my windos vista family premium from the backup drive, because my laptop refuses to boot and start the recovery file not found...

  Since then, I have tried to load the application of paint and had an error: microsoft paint has stopped working.
  When I tried to access the event viewer to check the erros, I get another error...
  Management Console Microsoft has stopped working...

  I don't know what to do I need paint I have no office program and problems accessing a link of a site.
  I use regularly and need to send a screenshot...

  Any help would be much appreciated, I have

  Toshiba satellite l40-139
  Windows vista Home premium SP2 32-bit.
  1 GB of ram
  o free 31.1 Go Go 55.6 (c).
  54 GB of 54.6 GB free on (e)

  Hello

  Just a tip;
  If you need an office application then I recommend OpenOffice.
  It s software open source similar to MS Office and you can use and download it for free!

  The issue of your pain.
  The painting is part of the Windows OS. It of not possible to uninstall it.
  File paint.exe is placed in the folder c:\windows\system32\

  There seems to be an error of operating system... maybe the system is confused upward...
  try to clean the operating system using the CCleaner...
  It cleans the registry and maybe it helps to get rid of this error...

  otherwise, you need to reinstall the operating system...

• Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

  Hello

  I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing.

  I often watch videos online mode full screen (like on YouTube), but when I leave full-screen mode, I noticed that virtual scrolling stops working on the touchpad. This occurs in the latest versions of Internet Explorer and Firefox. I can still move the pointer, but cannot scroll. I also note that the icon in the taskbar freezes, because it does not meet all the movements on the touchpad. I have the latest version of the driver installed (10.0.3.0).

  Is it possible for Toshiba to issue an updated driver for the Synaptics pointing device which solves this problem?

  Thank you

  Hello

  It's the first time that someone has posted this question
  I checked this on my Satellite U400 and quest that; the touchpad works ok
  There may be a registry problem with your operating system who knows
  It would be interesting to know how the touchpad scroll function works by using the new OS installed

• Satellite L40-139 - possible to disable the low battery alarm?

  I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

  Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

  I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

  I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

  Any ideas?

  Hello

  Please check the BIOS settings.
  To access the BIOS F2 press Mobile start upward.
  There should be an option called something like low battery alarm
  Remember to save the changes before exiting the BIOS.