I have to run...
I have to run... "Dell Wireless WLAN Card Wireless Network Tray Applet" at startup? I am trying to speed up the boot process by disabling everything that I don't need.
Yes. It is the program responsible for the detection of WiFi networks. If you disable it, you can not connect to WiFi networks. If you are not connected using WiFi networks, you can turn it off.
Tags: Windows
Similar Questions
-
MSE says that I have to run Defender in order to remove found threats. I can't launch the Defender, it keeps closing
MSE says that I have to run Defender in order to remove found threats. I can't launch the Defender, it keeps closing
Suppose MSE wants that you run Windows Defender in offline mode (RDO), which is not the same as the defender of Windows that is installed on Win 7 and is disabled when MSE (and other anti-malware programs are installed. Yes, it's very confusing.
http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html
In any case, see below for information about the RDO:
You may need to use one or more of the following scanners in offline mode - you'll need to burn a CD using another computer and change the sequence of starting your computer to run the scan - instructions are provided with the links:
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
http://www.BitDefender.com/support/how-to-create-a-BitDefender-rescue-CD-627.html
http://www.freedrweb.com/LiveCD/
http://support.Kaspersky.com/viruses/RescueDisk?level=2
I hope this helps...
-
Original title: MAC to PC NETWORKING.
I added my Mac to my PC network workgroup. I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.
Hi markymo777,
I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.
Hope the helps of information.
Please post back and we do know. -
I have to run windows security when I am currently using Norton 360 Prime Minister?
I have to run windows security when I am currently using Norton 360 Prime Minister? Thanks (in advance) for any help with this?
Personally, I do not recommend norton but his preference of the user.
See thishttps://blog.kaspersky.com/multiple-antivirus-programs-bad-idea/Choose an anti-virus program<>(are much more free/paid, good antivirus and make a decision to find a suitable antivirus for you, you can see the link... ) Selection of a good antivirus is only ( up to the preference of the user)
Microsoft recommended anti-virus companies are here... http://Windows.Microsoft.com/en-us/Windows/antivirus-partners#AVtabs=Win7
-
I have both a laptop and a desktop computer and use a modem wired high-speed internet. I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...
Original title: router does not work...
Hello
Welcome to the Microsoft community.
I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.
You must contact the ISP to verify if they can help you with this question.
In addition you can keep these items handy, it might help you.
Set up a wireless router
http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router
Install or remove a modem
http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem
Change modem settings
http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings
It will be useful.
If you need help with Windows, let know us and we will be happy to help you.
-
I get the A12E5 error code when starting Adobe Application Manager, I use a Mac and want to have Illustrator running
-
receiving the message "an add we don't have to run for this site.
For some reason any annoying, very annoying message keeps popping up at the bottom of my screen, when sites with adobe flash (I installed it).
"An add we don't have to run for this site.Win7 ie9
I hope someone knows how to turn off this option?
Thank youHello - I noticed that flash on http://edition.cnn.com/2011/10/12/opinion/arab-world-changes/index.html announcement for example works well. but the announcement on http://www.ynetnews.com/articles/0, 7340, L-4135131, 00.html triggers the problem.
the same problem happens in some other Web sites with flash. Maybe that's a problem with the advertising areas that are blocked by my system? I see that the announcement on YNet is provided by http://ad.doubleclick.net . What is the source of the problem? Thank you -
Can we have two running instance of SST in a box
Can you have two running instance of SST in a box with a single installation of server of OSH.
Something like several instance of apache running with the help of various conf for each files.
-RamThere are certainly two instances to it.
Let me be clear. two parallel proceedings of OSH can be run simultaneously on the same machine.However, don't tell you about your needs of test and production environment. Obviously, you can't run "a test OHS and OHS server production running in the same m/c with OHS reinstall them. that cannot be done in any component. can you run "an intermediate test and another intermediate production without reinstalling a middle layer"? certainly not!
Read about the environments of test and production for applications first, and then read how it can be implemented in the Oracle Application Server Administrator's Guide for your appropriate version of the OAS.
-
When I run OnyX, he repeats to me I have to run repair disk.
I rebooted my Macbook Air, hold R command and run repair disk. Then I reboot again and try to re-run OnyX, but it still says that my computer needs repair disk.
I have to bring my laptop for a check-up or repair?
Do not use OnyX. Non-Apple utility such as he are not reliable. What's worse, is that they are more than capable of causing problems where none exist, or exacerbate existing problems.
I have to bring my laptop for a check-up or repair?
If your Mac is running normally, none. However, you need to implement a reliable backup strategy, such as Time Machine: use Time Machine to back up or restore your Mac - Apple Support.
-
I was able to hit just enter on websites in the drop down, before, but now it does not work. I tried the upgrade to FF4 thinking that it can solve my problem but not yet, I have to use the arrow at the end of the address bar to run to the page.
If this does not work properly in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.
- Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
- Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
-
I HAVE TO RUN MY COMPUTER IN SAFE MODE / NETWORKING, NEED HELP
HAD A REMOTE MICROSOFT ADJ., BUT HAVE NOT HAD CONTACT WITH HIM IN ABOUT 3 WEEKS HOPE THAT HE IS OK...
Moved from feedback
Looks like one of those dubious scams. Theyre fake... I'm sure that Ms. access you your system remotely. They have disabled probably many things. Did you pay them for that?
I could check but you need to install teamviewer. I don't know if it will install in SafeMode tho.
Press simultaneously the windows + r or go to run. Type msconfig. Look under the Startup tab if safe mode is checked uncheck the box as well as the network then reboot
-
I have 48 running of the process, in any case to reduce safely to a min.?
It seems that I have far too many process running and have no idea how do to reduce to a minimum safe number?
If I had 48 treatment running, I would be very concerned!
-
I have a running program... BUT I'm not! Help...
We have a program that is running and I see on the 'task manager' or the sign down! And when I try to click on the program to open it, it just says: 'the program's already runnin I'll always have to restart the entire computer again just to pull up! Can someone help me?
Thanks in advance!
Tini
Do you mean that you can't find the application in the 'Applications' in the Task Manager tab or that you don't find it in the tab "processes"?
The process name that appears under the processes tab will be not exactly the name you would expect - and sometimes it's a bit obscure.
What is the name of the program?
What happens if you restart the computer - which should stop, unless it is configured to run at startup of Windows. You can prevent this behavior if you want.
The best way to stop an application from starting when Windows starts is to find the appropriate option or setting in the menu of the application of "Préférences" or "Options".
Otherwise, download Autoruns, let it scan, see the 'Connection' tab, find the application and uncheck the box at the left end of the line.
-
My emachines el 1600 failed and I have tried run a system recovery. . .
I burned the disc 2, when I first took the machine home. It was running windows xp home edition sp3 and worked well until a few weeks back.
Everything starts with black screen and messages for config safe mode normal work last etc. put in the recovery and put disk in boot to dvd, etc, but still just a black screen after it leave it doesn't seem that hard drive is bad, just something happening is not in the order of things.
I got a message in one of my essays to start... HAL.dll corrupt or missing
Hello johnchappina,
If the machine not start and complete the recovery process, we have hardware problems that must be addressed before we can expect Windows to behave properly.
I would encourage you to run hardware diagnostics supplied by your manufacturer to go forward.
Please note that material diagnostics shall not exempt a machine to have clerical errors. They simply tell us if they find some hardware issues.
Best regards
Matthew_Ha
-
Can I have 4 running security software at the same time in XP?
Hello to everyone! I just want to ask experts out there on my plan. I think to install in my laptop, the following security software: 1 Microsoft Security Essentials 2. Ad-Aware Pro 3. Malwarebytes Pro 4. Paid version of Prevx
Can tell me please if having these four software would not create any conflict? And another, I know which of the 3 above paid software here offers a license which are sold on a full-time basis? I mean, once purchased, there is already no need to buy again at end of renewal. Thanks in advance.
Should be good, but you don't need as much. Just do not install / run more than 1 Firewall at the same time. Otherwise, they will conflict. You need Malwarebytes / adaware and Prevx on renewals. Since then, MS do not have these programs
Maybe you are looking for
-
Can I delete my recent insert in browser preferences?
I just entered an incorrect insertion in my browser preferences.I think he could have just barely out of a few empty spaces and now I want to just delete it and try again.But there were warnings beforehand when I opened "Prefs" to be VERY careful.I w
-
Expression Studio 4 Web Professional has done cover page photo gallery?
Expression studio 4 web professional there a picture library as cover page done? If so, what its label? original title: expression studio 4 web professional
-
vWorkspace 8.6.1, flyway SQL support
Hi, we expect update 8.0.1 for 8.6.1 vWorkspace farms. Data bases of management currently operates on a 2008 R2 SQL and must migrate to a SQL to 2014. Unfortunately vWorkspace 8.6.1 does not officially support 2008 R2 SQL. I would have preferred to m
-
I have macafee antivirus protection that came with my laptop. The subscription must be over now because I bought this laptop about 2 and 1/2 years ago. In December 2012. Today my antivirus protection shows that I have another 600 days of protection.
-
How to disable vibrations on the place of meetings 11
As the title says... How to turn off the vibration function on the tone of original windows 11 venues. The most boring ive never used function Thank you G