I have trouble with Universal Crusaders print do not.

Similar Questions

• (Redirected) new here - and have trouble with the black ink cartridge not to produce quantity it promises

  Hello

  I have an AIO 948 printer and for years had a ng bad espain on the number of prints each cartridge provides. He promises 585 when newly installed - this time I counted each impression, and now when he says that it is empty ( but experience, explains that he will yet deliver ca 30-40) gave 136 prints

  It's a lot less Quen 585

  I have found no place to ask this question about dell sites - it's not on my customer number - this is a general question whether dell deliver what they say they do - 585 prints pr cassette.

  Dell printers I had for about 6 years or more - it's a lot of cassettes - and I have such a bad feeling of being deceived here. Please explain that to me, someone - or at least give me a maildress who will read it and explain.

  Thank you!

  Aurélie

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.

• I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion

  I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion

  original title: installation problem

  Local printers

  To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.

  If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.

  If it is an older model that connects using the serial or parallel, you may need to install manually.

  To install the printer (add) a local

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.

     • If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • You can print a test page to make sure that the printer is working correctly. See print a test page.

     • If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.

  My printer does not print.

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.

  Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.

  To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:

  1. Click to open Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.

  Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.

  If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.

• I have problem with wifi iphone 6 s not connected...

  I have problem with iphone 6s more wifi not connected...

  I'm having the same problem and tried all the fixes I found online and nothing has worked so far.

• OfficeJet J4550 with Snow Leopard - printer does not

  I have recently upgraded to Snow Leopard, and had trouble with scanning on my officejet J4550 until I read the posts on this forum, downloaded the recent update and learned to go to preview or Capture images. Now I can scan, but I cannot print. After sending a job to print, the print queue indicates that the status is "completed" - but the work has never been printed. What should I do?

  Reload the ' bad software (which for pre - 10.6), then uninstall it by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Is there a option of zoon of the Web pages with Mozilla Firefox, if I have trouble reading the small print?

  I take a class any web business, and I can't find a lot of the functions that they speak.

  Hello
  Have you tried the Firefox zoom feature? This initiative will increase the size of the web pages.

  • To make things bigger, press Ctrl and + at the same time.
  • To make things smaller, press Ctrl and - at the same time.
  • Pour reinitialiser to reset the size of return to normal, press Ctrl and 0 at the same time.

  You can also use the NoSquint add-on to change the zoom level by default for all websites at the same time. After setting your overall zoom level, you can still adjust the zoom on different sites.

  With the help of NoSquint:

  1. After installation of NoSquint, make sure you have the add-on bar displayed:
     • Click the new tab button ("+") or a box empty bar tab to the right of the item and choose the module bar on the shortcut menu.
  2. Click on the % in the bar of the add-on call site preferences, then click the global settings button, then the zoom tab.
     • You can experiment with sizes greater than 125%, but it is not recommended that you will more than 150%, unless you have a large screen high resolution.

  If there are sites that are still a concern, feel free to post their URLs.

  Please let us know if this helped you!

  Thank you.

• I have trouble getting my default printer driver settings to stay as my default.

  Is it possible to lock the current drivers as default without having to select a preset every time?  Also I have problems when printing from Adobe software, it seems to use a radio button this conversion "uses JPEG2000 maximum available resolution.  It has made my life miserable with print time 45 minutes.  Is there a way to disable this feature?

  Thanks in advance!

  Murph da wrote:

  Is it possible to lock the current drivers as default without having to select a preset every time?

  Yes it is. Used by OS X printing system is called CUPS and through its page web, you can set default values for the driver.

  First step is to open the Terminal (located in Applications > utilities). Then, copy the following line of text and paste it into the Terminal and then press enter

  cupsctl Web interface = yes

  This will display the web page of CUPS.

  Next step is to open Safari and enter the following information as URL

  http://127.0.0.1:631 / printers

  This will show the printers you have installed on the Mac. Select the one you want to change the default settings.

  With the printer display mode, you will see two menus - Maintenance and Administration. Click on the Administration menu, and then select set default Options. Depending on the driver used, you will now see a new view with some headers in text, such as installed Options, generals, banners, and policies. Click general. This will display the current driver settings. Scroll down to locate the setting that you want to change, and then select the setting you want. Then scroll all the way down and click the set default Options. You will now need to enter your Admin user account and password. The web page now that the default options for this printer have been defined.

  Now, open a document and select this option to print and check that the default has been changed.

• I have problems with see a 'Print Preview' a message from Hotmail. Which shows on the screen is print ONLY lines header and footer from the preview. What's wrong?

  What I usually do, it is preview before printing a message and then decide exactly which page (s), I need printing.   I have no problem with e-mail messages that crosses on my another account which is with att.my.yahoo.   So what's the problem with Hotmail via my MSN.com account?   What I am doing wrong?

  Hello

  ·         Are you able to print from other e-mails without any problems?

  I suggest you to take a look at the links below.

  http://windowslivehelp.com/thread.aspx?ThreadId=57b3371c-7721-43A9-8CF0-af58408a4c03

  http://windowslivehelp.com/thread.aspx?ThreadId=a1d6ab33-baeb-4e38-a74f-607a5a971d0a

  Also, take a look at search results

  I also suggest that you send your query in windows live forums for further assistance.

  Windows Live Solution Center

  http://www.windowslivehelp.com/

• Hi all, I have trouble with the garbage in TB, icon both for the location of the message.

  Icon to the trash ("basket" in IT version) displays correctly when starting TB, but changes to the basket right after password insertion. Deleted messages are lost, wonder where. A "Trash" folder will actually end, where filter can put unwanted/irrellevant messages. Maully deleted messages do not go there. Any help to solve this?
  I use TB 38.1.0 on a PC with XP, SP3.
  Account IMAP (Gmail), set not to download messages from the server.
  Thanks for any help

  Right-click on the account and choose Subscribe. Search the trash folder to subscribe to.

  Right-click the account again, and then select settings. In the server settings to select the account when I delete a message and place it in the appropriate folder.

  I'm guessing that localized Thunderbird the name for the folder, Recycle Bin and Googles are different. (Just as some IMAP servers have Trash [us], and some have removed [UK] in the English locale)

• I have trouble getting documents to print. My printer shows but is not printed and I have problems to open the documents. What should I do?

  My printer will print a demo and report, but freezes when I try to print a document or any other task. Most of the time when I try to open a document he invites me to open or save and when I select open it momentarily off and then immediately prompts you to open or save again. It does again and again and never opens. When I select record it indicates that the file already exists. I tried to unplug the computer and the printer and restart their but the problem persists. What can I do?

  Hello, Jsraine,

  To rule out malicious software, restart your computer and start typing the F8 key.  Select Mode safe mode with networking.  Disable the system restore where the malware is known to hide.  Re-activate when you are finished.

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  Download the following tool and run a scan complete

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  When you're finished, restart Windows

  Start > type CMD

  Click on CMD and type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  When you are finished, while remaining in the CMD window, type chkdsk /f /r

  Press enter

  You will see a message about the volume must be locked and you want to monitor during the recovery?

  Press y and press enter

  Restart the computer for the scan at startup

  When you are finished, you will find the results in Event Viewer > Windows Logs > application log

  Look for Winninet to see the results

  Start > type Services.msc

  Press enter

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the spooler

  Window close services

  Start > Control Panel > printers folder

  Right-click on the printer, and then select open

  You see all pending print jobs?

  Click the printer menu, and then select Cancel all Documents

  Close printers folder

  Start > right click on computer

  Select manage

  Select Device Manager in the left index

  Click on the + sign next to the IEEE... compatible printer

  Right-click on the printer and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the printer and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer and select uninstall

  Close Device Manager

  Restart the computer

  Windows will reinstall drivers on reboot

  Go to the manufacturer's website and search for updated drivers

  Open the Services window

  Scroll down to print spooler

  Click with the right button on spooler

  Select restart

  Wait for Windows to start the spooler

  Close the Services window when you are finished

  Try printing again

• I have trouble with my Audio. Multimedia Audio endpoint Builder Services class Scheduler & Windows.

  0xc1 193 error: appears when I try to run these 2 services, Windows Audio needs these 2 services began so that audio windows can start up fix the Circle Red & White 'X' which appeared on my volume icon in the bottom right, so that my audio can work.

  Multimedia class Scheduler

  Path to executable: C:\windows\system32\svchost.exe-k - netsvcs

  Windows Audio endpoint Builder

  The executable path: C:\windows\System32\svchost.exe k LocalSystemNetworkRestricted

  The two executable path in Services' and the path of the Image in the registry editor "" are the same for the two Services above.

  I need to know how this can be fixed, and I tried to do a system update previous but without success, the restore has failed.

  Hello Canofolives,

  Please keep us updated on the status of the issue.

  Have you tried using all the advice in the previous post?

  Please refer to the suggestions of Vaseem Ahmed replied on January 20, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-error-193-has-occurred-is-not-a-valid-Win32/be04aba0-AFC0-475e-A41F-ebc399318a5d

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• I have trouble with the vendor-specific HID device in windows 8.1 64-bit OS

  I'm doing a HID of vendor-specific device and contact him using windows application.

  I have some difficulties to communicate with devices in 8.1 64-bit windows

  I have test cases below.

  -> Windows 7 64 - bit OS + 32-bit application works well

  8.1 Windows 64 bit OS + 32-bit application-> fails about 70 ~ 80%

  8.1 Windows 64 bit OS + application 64-bit-> works well

  OS 64 bit Windows 10 + 32-bit application-> works well

  I debugged for points of failure and found below two API functions are sometimes failed.

  HidD_GetPreparsedData

  HidD_GetAttributes

  How can I get around it?

  Hello

  I suggest you post your query on TechNet forum by following the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information is useful.

• I have trouble with the download of new licenses

  Dear,

  My payment was delayed and n (in June) and now I'm not able to download another permit. I have pictures of pogram 10 each month. Can I ask you to check my account?

  Thank you very much.

  Best regards

  Vojtech Mokry

  The subscription of Stock purchased on April 22, 2016 is now active with unused licenses in your Kitty.

  In case you can't download, please let us know the error, or alternatively, you can contact support via Adobe Support

  Concerning

  Stéphane

• I have trouble with my contact form.

  When I put in place 2 fields in my form, I get the data of these 2 fields sent to my email address successfully. However, when I add a third field, no mail is received to my email address. Help, please.

  You need to "build" the message - php below. Code goes in the file mailscript.php: (change the XXXXX @. hotmail.com below to the email address you have need of the information should be sent to (it is not advisable to display email addresses in the forum that you could get the spam))

  $email = "XXXXX @." hotmail.com';

  $name = $_POST ['name'];

  $emailadd = $_POST ['emailadd"];

  $text = $_POST ['text'];

  $subject = "message on the Web site;

  $headers = "from: $emailadd\r\n";

  $headers. = "reply-To: $emailadd\r\n";

  build the message

  $message = "name: $name\n\n;

  $message. = "e-mail address: $emailadd\n\n";

  $message. = "message: $text\n\n";

  mail ($email $subject, $message, $headers);

  Print "your message has been sent;"

  Form code

  Name

  Email address

  Message

  It is a basic shape - you have no validation.

• Does anyone else have trouble with pressure on the edges?

  Often, it seems that the Xoom has a mind of its own and I noticed that it seems that causes pressure on the banks to do things I'm not saying it to do.

  And then reading a book by Google Book Search or the Kindle app to touch the side of the screen to turn a page, it is often two or three instead of one.

  A lot of buttons seems to be much too sensitive. Is there a way to lower the sensitivity of the touch? I couldn't see in the settings, but it would be easy for me to miss.

  Welcome to arizona-willie,

  I don't think there is a way to lower the sensitivity to the 'touch' or region on the Xoom. I found with my unit that it does not recognize a tap on the perimeter black solid, but it will be pick-up my finger if it flies over the slightest on the portion of the screen. With the help of the portfolio of Motorola or a gel sleeve helps me keep the Xoom without touching the edges during usage. This could be another option to look at.