I have trouble with my Audio. Multimedia Audio endpoint Builder Services class Scheduler & Windows.

Similar Questions

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• Restart the Windows Audio endpoint Builder Service?

  Poverty and economic hardship MS caused me by disabling my 3 computers with incompatible drivers in the forced updates! For example:

  How can I restart my sound by restarting the Service Windows Audio Endpoint Builder?  According to the Services snap-in, this is why I have no sound. And I really need the Narrator because I have bad vision.

  I am the SMA, no problem, but he needs another permission and I don't know what it is.

  Hello

  Isolate us the problem by answering the following:

  1. Did you get any error messages?
  2. Did you do the changes on your PC before this concern?
  3. What are the updates in your PC?

  You can check if the driver is already installed or updated by check on your Device Manager under sounds, video, and game controllers.

  You can also download and run the Windows Update Troubleshooter on this link.

  Thank you.

• How to add the endpoint Builder service windows audio

  I can't start the audio endpoint Builder service windows because it is not in the services folder. How to retsore this service. Reloading windows has absolutely nothing. The windows Fix - It _ jack tool. I'm not interested in a solution for Windows 7, I am running XP

  AWE, that explains that.

  My 'Sounds and Audio Devices Properties' Panel is grayed out and I can't choose my new outboard USB sound card, my volume button is red x ed out.
  Any help?

• Trouble with my email, I try all I get the following, windows update cannot download files due to the error 3048,3...

  original title: what is 3048,3

  I have a problem with my email and everything I try the update of windows I get the following, can not download files due to the error 3048,3... Thank you

  Hello

  ·         What mail client do you use?

  ·         Update you are trying to install?

  ·         What is the full error message that you receive?

  ·         What is the exact error message that you receive by email?

  I suggest to reset Windows Update components and check if it helps.

  See the Microsoft KB article below:

  http://support.Microsoft.com/kb/971058

• Have problems with the Audio after upgrade to Windows 10

  I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?

  Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856

• I have problems with my audio new laptop second hand when I plug in external speakers, it's as if some of the sound is missing. Can anyone help?

  Problem: Sound is missing for example hand singing on a piece of music.
  Laptop: Compaq Presario C700/C731TU
  Sound: High Def Conexant Smart Audio 221
  Version 4.42.0.50

  I tried updating the driver and also searched through preferences and settings but have not found a solution, this is the first place where I've been since then. IT all works very well by means of edge speakers, but even a standard set of headphones seems to miss her.

  Thanks for you suggestion, I did since then and he said that everything was working fine. I also tried a number of other suggestions from other sites, without success. I then went to do a physical inspection and when I unplugged the audio cable I noticed that the ring of metal around the entrance of my helmet was missing, I told the person, I bought the laptop. Fortunately he found on his ground, not knowing what it was and put it on the side of "just in case". I have re-installed and the whole works fine. So if someone else is reading this and is not able to resolve a similar audio problem with something to do with the software, look at the finer physical details. It could be as simple as that.

• I have problems with my audio driver Bluetooth for acer aspire M5-481PT

  This device cannot start. (Code 10)

  This https://www.wiknix.com/solved-bluetooth-device-not-working-in-windows-8-1/ work

• Hi all, I have trouble with the garbage in TB, icon both for the location of the message.

  Icon to the trash ("basket" in IT version) displays correctly when starting TB, but changes to the basket right after password insertion. Deleted messages are lost, wonder where. A "Trash" folder will actually end, where filter can put unwanted/irrellevant messages. Maully deleted messages do not go there. Any help to solve this?
  I use TB 38.1.0 on a PC with XP, SP3.
  Account IMAP (Gmail), set not to download messages from the server.
  Thanks for any help

  Right-click on the account and choose Subscribe. Search the trash folder to subscribe to.

  Right-click the account again, and then select settings. In the server settings to select the account when I delete a message and place it in the appropriate folder.

  I'm guessing that localized Thunderbird the name for the folder, Recycle Bin and Googles are different. (Just as some IMAP servers have Trash [us], and some have removed [UK] in the English locale)

• I have trouble with Universal Crusaders print do not.

  When the U of crosswords does not print, I'm trying to print by selecting the application on the 8500 a screen.  However, when I select the app on the screen of 8500 a I get the message that the software of the printer is unable to connect to the server. This happens every time, even if other applications can connect to the server and the printer is online. I need to have the U Crossword app to connect with the server for him ask to print crosswords of today. It is the only way for me to get when it does not print. What is the problem with this application will not connect with the server?

  Feldo salvation,

  I'm sorry that you are having this problem with this application.

  Here are a few things to try:

  (1) this solution is guaranteed. Note: If you use this it will cancel all subscriptions to applications that you have created. If you have an account eprintcenter.com (or eprint.com), it will remove your printer and your custom your account e-mail address. Then you can then add your printer (a printer code wil print automatically) and recreate a custom e-mail address. However, you will not be able to create the same email address accurate that you had before. You can also then to resubscribe to all the apps that have been cancelled.

  To use this solution, visit the following Web site: How to handle, break or unsubscribe of prints and faxes and click on the link for three Solution: enable/disable Web Services on your printer. Follow the instructions.

  (2) power cycle your printer this way: turn the printer off, unplug the printer (to the outlet or at the back of the printer), wait 30 seconds, plug in the printer and turn on the printer. Wait at least 5 minutes, then your problem can be solved.

  Let us know what has worked for you!

• I have trouble with the vendor-specific HID device in windows 8.1 64-bit OS

  I'm doing a HID of vendor-specific device and contact him using windows application.

  I have some difficulties to communicate with devices in 8.1 64-bit windows

  I have test cases below.

  -> Windows 7 64 - bit OS + 32-bit application works well

  8.1 Windows 64 bit OS + 32-bit application-> fails about 70 ~ 80%

  8.1 Windows 64 bit OS + application 64-bit-> works well

  OS 64 bit Windows 10 + 32-bit application-> works well

  I debugged for points of failure and found below two API functions are sometimes failed.

  HidD_GetPreparsedData

  HidD_GetAttributes

  How can I get around it?

  Hello

  I suggest you post your query on TechNet forum by following the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information is useful.

• I have trouble with the download of new licenses

  Dear,

  My payment was delayed and n (in June) and now I'm not able to download another permit. I have pictures of pogram 10 each month. Can I ask you to check my account?

  Thank you very much.

  Best regards

  Vojtech Mokry

  The subscription of Stock purchased on April 22, 2016 is now active with unused licenses in your Kitty.

  In case you can't download, please let us know the error, or alternatively, you can contact support via Adobe Support

  Concerning

  Stéphane

• Does anyone else have trouble with pressure on the edges?

  Often, it seems that the Xoom has a mind of its own and I noticed that it seems that causes pressure on the banks to do things I'm not saying it to do.

  And then reading a book by Google Book Search or the Kindle app to touch the side of the screen to turn a page, it is often two or three instead of one.

  A lot of buttons seems to be much too sensitive. Is there a way to lower the sensitivity of the touch? I couldn't see in the settings, but it would be easy for me to miss.

  Welcome to arizona-willie,

  I don't think there is a way to lower the sensitivity to the 'touch' or region on the Xoom. I found with my unit that it does not recognize a tap on the perimeter black solid, but it will be pick-up my finger if it flies over the slightest on the portion of the screen. With the help of the portfolio of Motorola or a gel sleeve helps me keep the Xoom without touching the edges during usage. This could be another option to look at.

• Hello, I upgraded my HP pavilion g7 to Windows 8, and now I have trouble with the graphics drivers.

  Hi, I upgraded my laptop HP pavilion g7 (comes with windows 7) to Windows 8 Pro, reset time and now in the Device Manager there is a yellow exclamation point before "AMD Radeon HD series 7400M (Microsoft Corporation - WDDM v1.20. And this is not correct! My graphics card is a Radeon HD 6400 M (The HD 6000 M series). Windows says driver is up to date, but is not the correct driver. Can I play the games, but at a very low framerate. My model number is:

  HP Pavilion g7-1050ed

  Greetings,

  Max Korlaar

  I installed the drivers from Leshcat!  It worked! leshcatlabs.NET

• (Redirected) new here - and have trouble with the black ink cartridge not to produce quantity it promises

  Hello

  I have an AIO 948 printer and for years had a ng bad espain on the number of prints each cartridge provides. He promises 585 when newly installed - this time I counted each impression, and now when he says that it is empty ( but experience, explains that he will yet deliver ca 30-40) gave 136 prints

  It's a lot less Quen 585

  I have found no place to ask this question about dell sites - it's not on my customer number - this is a general question whether dell deliver what they say they do - 585 prints pr cassette.

  Dell printers I had for about 6 years or more - it's a lot of cassettes - and I have such a bad feeling of being deceived here. Please explain that to me, someone - or at least give me a maildress who will read it and explain.

  Thank you!

  Aurélie

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.