I have two 2 physical HDD (logic 1 = 2 partitions, 1 with partion unique); on all the page files will improve performance, or is an annex of page file?

Similar Questions

• How can I add two pages just before page 7 of the book, which will change all the page numbers that follow?

  Hello

  I'm close to finishing a book of 257 pages.  All pages are numbered automatically down, and I spent a few weeks carefully constructed an Index at the end of the book that has all the right page numbers listed for everything.  So whatever I do, I can't change my page numbers.

  But at this late stage, I would like to add a few epigraphs (quotations) in four or five places (I just got this idea today, I'm afraid).

  Is it possible to add a few pages here and there (I will add two pages at a time, I know, or he'll hit all the pages that follow, half of them designed to be left, and half designed to be on the right - off) that are not numbered, and that will not affect the numbering of the following pages?

  Kind regards

  Malcolm

  It is not Automatic way. If you are ready to have unnumbered pages which are not included in the number of pages, you can, for each page the inserted value

  (1) select the first page after the pages will be added

  (2) in the menu pages palette, use the Options Section and number and the page number of started with the value what it is already. In this way, adding pages will not affect the numbering.

  (3) in order to avoid conflicts with the new pages page number, set their numbering on something else as 1,2,3. (as i, ii, iii, for example)

  For later use, you can configure your index with the indexing of InDesign tools, if a false problem, as you would have been able to add the pages and then re - automatically generate a correct index.

• all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  =================================
  Try the following...

  View / Zoom... reduce the percentage

  The Zoom option can also be accessed from
  your at the bottom status bar.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• I have a grid of cube on top of my document with a cube icon in the upper left corner, I can't access. How can I get rid of these?  Using the most recent thank you CC Illustrator.

  I have a grid of cube on top of my document with a cube icon in the upper left corner, I can't access. How can I get rid of these?

  With the help of the new CC Illustrator

  Thank you.

  Command shift I - Mac

  Shift Ctrl I - Win

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• hard drive is full, but we only have two thousand photo.s on it. It should be less than 10% of the full

  Full hard drive to 99%. There are plenty of copies of the update and 451 gb cleaning of windows files.system seems to recognize lajit programs and just says full. Windows vista home prem

  Hello

  see if this program helps you to determine what is taking place:

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  _________________________________________________________

  Disk Cleanup:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  1. By clicking on the Start button to open Disk Cleanup , on all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. In the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  4. Click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

    Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

    In some editions of Windows Vista, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. This information will also be deleted. For more information about system restore, search Windows Help and Support 'system restore.

  _________________________________________________________

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  __________________________________________________________

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• I have two games that wil not play on windows 7__cossacks 11 (play not at all) and company of heroes (will play from 2 to 25 minutes and then crashes.

  I just bought new computer hp dv6 2120 and responsible games, I had already played on hp pavliion 9700 with windows vista.     new system is windows 7.  a game that is Cossacks 11 will not play all States must \I hepatitis e windows vista has and the other game which is the company of Heroes tales of Valor will play but then crashes and creates the error report.  will play 2 to 35 minutes before the accident appears completely random.

  help, I'm getting frustratee

  I have to agree, update the video drivers is probly the answer, however do it from the manufacturer's website and not windows. Uninstall and remove drivers, then restart and manufacturers to download to your verision of windows 7 (x 86 or x 64)

  PS. you don't have to worry about uninstalling and removing the drivers, when you restart it will be a most vile driver that windows will use so that you can see the video, even if it will proly be huge and Boret and maybe not in all the colors you are used to seeing, this will set after you have installed the appropriate drivers.

  Home page: http://deadwinter.servegame.com RSS FEED: http://deadwinter.servegame.com/?feed=rss2 Podcast: http://totemsoup.podbean.com/

• I have lost my Windows XP Professionsla installation disc that came with computer and I see the message asking me to insert disk 3 to reinstall the files. What should I do?

  I lost the Windows Professional disc that came with the computer. I get a pop up requires me to insert the disc 3 of which I don't have the installation disc. Even if I try to do a system restore I need the disk. I can't lose information that is on the computer and do not have an external drive. What should I do?

  There is no disc 3 of Windows XP Professional.  Windows XP (other Media Center if I remember well) was a CD.

  Please copy the message down verbatim - including the title bar - and who post here.

  You can move this pop-up window on the side and also do all the following - in the order given anything of it periodically, you're already doing...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I have 2 Gmail accounts that I use Thunderbird to work with. Suddenly, one of the accounts has stopped working (password requests).

  For a year I used without problem Thunderbird to work with two of my Gmail accounts without problems.
  I had been on a long trip for the last 2 weeks had not begun to Thunderbird. When I did it for the first time this morning, I couldn't work or another account with it.

  Reset, return all settings solved the problem for ONE of my accounts (the main!), but the other continues to refuse to work.
  Yes, I have IMAP and less secure device permissions enabled in the Gmail settings. I changed my passwords and their update on all ends and again, my main account works, but the other refuses to accept passwords, even though I know they are correct.

  I still get the "cannot connect to server imap.gmail.com ." Message and I am prompted for my password.

  No luck.

  Could someone help me novel?

  Thank you very much,

  Zea

  After digging around a few others, I finally managed to find the google site:

  https://support.Google.com/accounts/answer/6009563

  There is a link on the bottom, saying: "allow access". Click on this one, 'continue' and directly there after prompt to synchronize Thunderbird. That solved the problem.

  Synchronize Thunderbird now until my two accounts again.

  Thanks for all the help and all the world looking in there, I hope this helps the other 3 who clicked on they have the same problem.

  PS: In your web browser, you must be connected to the Google account with disorders!

• You used to be able to scroll through the story of a tab with an arrow on the left of the screen to see all the pages that you have visited on this tab and now it is absent. You cannot select a page that has been perhaps 12 clicks back now.

  If I am on a site and click on several links on the page, I want to be able to look at the history of my clicks and return click earlier - as the second or third one instead of hitting the button arrow 12 times. You used to be able to get a history of drop-down list of all clicks on a tab - it has gone now and it is really annoying.

  There is an arrow to the left ("back" button). Click and hold down and after a second, you will have a list of the tab history. You can then select the page you want from there.

• Firefox has crashed, and now I have a constant stream of blank tabs that keep popping up in front of all the others. They will not erase.

  First all the tabs I had open suddenly lacking at the Firefox help page. Now I have a constant stream of blank tabs that keep popping up in front of others. I click again to remove the but they back just pop up. Also whenever I delete a tab while browsing a Web site, I get another white added to the front of all the others. I uninstalled and reinstalled the program and it did not help.

  You ensure that you do not have a problem with a sticky key F1 on your keyboard?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  If this does not help then try a new profile.
  
  See basic troubleshooting: a new profile

  Your above posted the details of the system tampon() obsolete show with known risks to stability and security that you should update.

  1. Shockwave Flash 10.1 r53
  2. Next-generation Java plug-in 1.6.0_14 for Mozilla browsers

  Update the Flash plugin to the latest version.

  • http://www.Adobe.com/software/Flash/about/

  Update the Java plugin to the latest version.

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html (Java platform: download JRE)

• I have two script. one for indesign and another for photoshop. How can I combine the two scripts?

  
  Hi all

  I have a script for indd that convert a table selected user in JPG format (1276 px width, height varies). Second script photoshop asking to select jpg file and then check if the height in pixels is less than 1018 pixel, can he expand canvas size (height) to 1018 px.

  How can I combine the two script, tip, or how to start would be useful? The workflow must be:

  • the user select table in the indd document
  • export table in jpg format
  • script you will be asked to select the file table jpg or if it is possible to automate this would be awesome.
  • enlarge the height of the canvas to 1018 px

  Thank you

  Marie rosine

  PS: I have already read the Java script tool guide pdf but unable to understand

  Yes and the documentation is pretty self-explanatory.

  However, here is an excerpt:

  function callPhotoshop(file) {
     var bt = new BridgeTalk;
  
     bt.target = "photoshop";
  
     bt.body = "function main (){ return confirm('Am I in Photoshop?'); }; main();";
  
    bt.onResult = function(resObj)
    {
    var myResult = resObj.body;
    alert( myResult? "PS code was correctly executed" : "Something wrong happened" );
    }
  
     bt.send();
  }
  
  callPhotoshop();
  

  HTH,

  Loïc

  http://www.ozalto.com

• When you delete a folder of photos empty, all the image files have been deleted and are not in the Recycle Bin

  I've highlighted that an empty images folder and you press the button Delete. Each photo file (and the content) in the library has been removed. Basket is empty

  * original title - all images disappeared in cyberspace *.

  Sorry if I look like I ask the same thing again and again I REALLY don't want to hear it, but just beyond bizarre. There is no reason crap for photos to just upward and vanish.

  OK how bout this. Assuming the photo library you meant the images library, like the one on the little box in the file Explorer, users, go to start, computer, drive C, and right-click on my pictures, and then select Properties. If this was not the 'official' picture library, go to the folder view these photos and go to properties it there instead.

  Now on the shortcut menu, click previous versions, wait list to fill out, when it does, click one of the folders that was before the photos have disappeared and select restore.

  Essentially, this will make the pictures folder how was the date that you have chosen your photos, then all must return.

• Impossible to find all the VM files after changing the esxi4 HDD esxi5

  Hi all

  I have a problem and you need help someone here.  I have an esxi4 with some VM guest OS inside and works without problem, after I detach the esxi4 host harddrive to a new host esxi5.  I can't not find any data file or vmdk in esxi5 under my vSphere client hosting.  Then I checked the disk space has been used but no file inside?  Same result even I update the vmfs3 to vmfs5 data store.  What's wrong???

  Help, please

  NG Man

  Welcome to the community,

  Please provide more details.

  • do you see the disc moved under Configuration-> storage-> vmhbaXX adapters?
  • the datatsore dies it see the place in the Configuration-> storage?
  • make data stores (old and new) have different names - the same name could cause problems!
  • you see any folder or files when you 'old' data store using the browser to store data of pen?

  Same result even I update the data vmfs3 to vmfs5 store

  If there are any questions, it is not a good idea to make major changes without knowing the cause of the problem!

  André