Canon PowerShot SX500 IS? B & H no longer wears it

Similar Questions

• Canon powershot sx500 video shot at a concert. The audio is overmodulating

  Hello I used the sx500 Powershot.  Love for still images.   Try shooting video at a concert.  The audio was overmodulating.   The volume of the camera can be lowered?  What do you suggest me?

  Thank you

  Dawn B

  Hi dawnbelotti!

  Thank you for posting.  The PowerShot SX500 is a great camera for still shooting and video most of the conditions that do not involve very high level of shooting.  However, you can not get the highest audio quality when a concert recording, which can have high levels of volume.  There is not a parameter setting of the camera for the entry level of the microphone of the camera, so it is difficult to compensate for such a high volume level.

  It has not responded to your question or problem? Find more help contact us.

• a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  Yes, it looks like one of my chipmonks lol

  You can see how it performs your depth of field considerably long distances. Youshouln can't still need in most cases with this power zoom. You might need a tripod unless your super stable.

  It is a generic TV converter I don't see any listed for your model, I have the similar to your SX50HS. I use adapters to mount a 2 X tele-converter that Ive had for a former model Powershot to mine, but only on close shots with zoom, very little.

  I found with 50 X zoom that I don't need.

• Canon PowerShot S2 IS. The camera window does not work on Windows 7

  On my old computer I installed software for the Canon PowerShot S2 IS and it allowed me to download the photos by using the function "window of the camera."  Let me clarify that I wanted the date taken in the name of the file of the photo.  On my new computer with windows 7 if I can see that the camera is connected when I click on 'My computer', but when I use the camera window to download it says that it cannot detect the camera.

  The info might be useful:

  The next document in Canon indicates that
  "CameraWindow is no longer included in ZoomBrowser EX 6.6.0b or later.

  He goes on to say the following:

  "CameraWindow is available on the CD-ROM as a separate module. If necessary,
  install CameraWindow from the CD-ROM supplied with the product. Note: the
  Serial number of your Canon product (camera, printer, etc.) is required to
  Download this file.

  Here's how to access this info... go to the following link:

  http://usa.canon.com/cusa/support/consumer/digital_cameras/powershot_g_series/powershot_s2_is#DriversAndSoftware.

  Left click the "choose an operating system:" move the window, select Windows 7.

  Left click 'software '.

  Left click the button 'Download' for "ZoomBrowser EX 6.6.0b Application"

  This will display all the information on the download.

  Also... an updated version was published on 30/03/11

  Just a guess but maybe it would be interesting to try to install the update and
  then reinstall CameraWindow from the CD provided with the camera.

  Personally, I just download the pictures and rename them myself

  Name with the date change can be done easily in a batch

  Select the group from the newly downloaded (highlighted) and click with the right button on the first
  thumbnail or file name.

  In the menu... Choose... Rename...

  The name of the first file... Type of...

  08/09/2011 (10001) .jpg

  Press on... Enter and the remaining files will be renamed.

  08/09/2011 (10002) .jpg
  08/09/2011 (10003) .jpg
  08/09/2011 (10004) .jpg
  Etc...

• Cannot download photos from canon powershot HS 110.  Says another cannon is already running in the background

  I'm in Yosemite and all of a sudden I can't download photos from my canon powershot HS 110.  Message said there is already a gun running in the background.  It worked a few months previously.  Rebooting did not help.

  What is the exact message?

  Try using a card reader

  LN

• Using Canon PowerShot SD500 with Photo

  Does anyone have an idea how I can use my camera Canon PowerShot SD500 a little dated with El Capitan Photo? This camera is not on the list of the compatible, but I wasn't on the purchase of a new camera immediately. This camera is not on the list of those compatible. Thank you.

  You should be able to use the mini-USB to USB cable provided with the camera to connect it to your Mac. If Photos does not start by itself, you can start it manually, check the sidebar on the view menu, and select the camera in the sidebar. You should be presented with a screen to import. Click Import all.

• Canon Powershot SD980 IS, compatibility MAC Yosemite

  How to download pictures of Canon Powershot SD980 IS to Yosemite MAC?

  Get a USB SD card reader and then use it to import the files. When you plug USB, it will appear as a drive and will automatically provide Photos to import.

• My iMac has suddenly ceased to import pictures from my Canon PowerShot

  My MacBook Pro (retina, 13 inches, end 2013) has suddenly ceased to import pictures from my Canon PowerShot.  When the transfer cable is set up and I turn on the camera I get a message on the camera briefly: "Communication error".  I use OS X version 10.10.5 Yosemite and Photos, version 1.0.1 (215.65.0).  My camera specialist said that the problem is not with the camera.

  You have a large SD card in the camera which is full?  http://thedesignspace.NET/MT2archives/000757.html#.VmnV5Ch8u5Ythis seems to be a problem that appears. When the card is full, the camera will not export them and Iphoto seems to not recognize the camera.   https://www.jmedved.com/2012/02/Canon-SX230-communication-error/ You could go into Iphoto preferences and change in general, connecting camera into Iphoto for capturing images. It change and then transfer to Iphoto.

• Where can I find a driver for - Canon Powershot S300

  Where can I find a driver for the Canon Powershot S300?

  Where can I find a driver for the Canon Powershot S300?

  If it exists, you can find it on the Canon website.

  But you don't need. You ever need connect your device directly. Just buy a USB drive to SD card (or any form of memory card your camera uses). They are very expensive - generally around 2 US $ on Amazon.com - and are very easy to use. I find them preferable to connect the camera. on the one hand it does not use the batteries of your camera.

  .

• Canon Powershot sx60HS distorted, why?

  

  Photo taken with my Canon Powershot SX60HS is always distorted looks very flat angle very right and left. See my example of group photo, taken in MODE P very left. No effect applied simple click to shoot. But all my pictures are now just a waste. I do not understand why lens take photos in this form all this expertise can me...

  My camera data

  Canon PowerShot SX60HS

  CMIT ID: 2014DJ2229

  NO. 921051000337

  Pls. Note camera picked up only 4 months of JAPAN. I have reset all settings by default and clicked to new same distorted image. Pls help

  Hello

  Here's a few types of lens distortion.

  First of all, you have a slight distortion with close objects of shooting wide angle.

  Lenses wide angle make things close to the lens seems strangely great. You never want to do a portrait closeup zoomed out to a wide angle; always take a step back a little and then zoom in to frame the shot. The wide angle shot close up would give a big nose and a large forehead your subject on a small body. In your case the Lady on the left is closer to the camera
  Everyone so she seems so enlarged.

  Secondly, you have pad edge distortion.
  It's just a common defect with a cheaper camera and lenses
  As A Powershot will suffer more than a more expensive configuration of the camera. Just avoid the problem by not putting people completely on the edges of the photo. Leave an empty space.

• Cleaning LCD screen of my new camera Canon Powershot A4000 IS.

  How to proceed safely to clean the LCD screen of my new camera Canon Powershot A4000 IS? It seems that this model doesn't have an LCD screen for touch as the A3400 IS. Someone at the store where it was purchased, or a factory worker, left a few footprints of oil from skin smudge marks on it. How can I determine if these touching detracted from the screen? Is there is no reason to fuss with it and no harm to leave fingerprints on it, it might be better to leave it alone. Here again the presence of such oil may affect any coating on the LCD screen. Also, if I want to buy some protective plastic appropriate to place on it to avoid future scratches, (I don't see not the existence of any scratch right now), it seems that it might be a good idea to clean it first. But I could be wrong. I am a new user and I looked in every sense of the directives on this issue, both online and in the manual, but I can't find anything relevant other than the reprimand for camera general cleaning must guide is the result of the use of cleaners containing organic solvents. I saw a suggestion for another product to use a drop or two of water on a cloth of soft lens, but I don't know if it is reasonable in my situation with my particular product. Any reasonable response well informed and correct, offering advice on this subject would be very greatly appreciated. Thanks in advance.

  Clean your screen with a dry, soft cloth and never use any type of solvent, rubbing alcohol, etc.  Best is to use a cloth to clean the glasses and/or photographic lenses.  IMO, you could use a very small amount of water to help get rid of the traces of finger, but eventually I'd always for a soft, cloth dry and just rub a little harder (but not too loud, use your best judgment) to remove traces of fingers.  I used this technique for many years without any problems.

• Device driver for Canon Powershot G2 not found.

  I've just set up my new pc with Windows 7 Home Edition.  I have connected a Canon Powershot G2, but it cannot locate the device driver.  But when I check the list of devices, this camera is on the list and he said there is nothing I have to do.  An idea that I have to do to get the device operational?

  Hi MarkPosey,

  Try these steps and check the result.
  Step 1: Manually install the device driver
  a. use the device CD you got with the camera and install the driver.
  b. check if it works very well.

  Step 2: If the problem persists, check the Windows updates to see if there is an update available for your device
  see automatically get recommended drivers and updates for your hardware .
  b. download and install the update just for your device and restart the computer.
  c. check to see if the problem persists.

  See also install a USB device

  For further assistance, please contact Canon support team

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon PowerShot SX110 IS Camera__ 9MP digital

  Hello

  Canon PowerShot SX110 IS digital camera 9MP
  Sample SDK PSREC DSK does not not under Vista/windows 7

  concerning

  John

  Hello johnindia,

  Try to install in compatibility mode:

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and self-test program compatibility issues:

  1. open the program compatibility problems theStart button.

  Then click on Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, clickRun done for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Canon powershot a2000 is not connecting to the computer

  the driver software for my Canon powershot a2000 is not connect to my computer... any suggestions?

  Chester

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its compatibility Vista at the link above, and if not to see what are the solutions/patches are available from Canon.

  If it's Vista compatible > uninstall it, if installed > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows7 does not recognize my Canon Powershot ELPH HS 300

  Windows7 does not recognize my Canon Powershot ELPH 300 HS, even though this is supposed to be a fully compatible device? The camera and scanner Wizard is not even burst for her... What should I do? I have a strange feeling that the Assistant camera and scanner never installed correctly and so I have absolutely no drivers of the device. Canon offers all the drivers for the camera as it is supposed to get all Windows 7automatically... I am in a real bind here. Help!

  I've fixed since the question. The camera worked well and even connected to my other windows 7 computer operated when I realized the difference between my two computers is that I had windows media player installed on the second, not the first. Apparently the .dll files suitable for the use of the camera, etc. are part of the windows media kit, and I just installed it on the computer and tadaaa first machine works!  Thanks for your time!