I have vista sp2. I sent my HP e9150t to the problem of "crash."

Similar Questions

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have already reinstalled it, but it does not solve the problem.

  When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have the normal window for 1 second, but it changes in the background window only. So, without the toolbar or navigation. I have already reinstalled it, but it does not solve the problem.

  Hello jonson00, please follow the troubleshooting steps in Firefox opens with a white or transparent window. If this solves the problem, it would be also interesting including the extension has a problem in your case. Thank you!

• I have Vista SP2. Windows cannot check the updates. A previous audit of update 27/09/11. PC turns off only with button / stop.

  Vista SP 2 x 86 32 bit

  Compac Presario SR2180 NX

  disk defragmented

  the disk check run without error

  Registry verified

  Norton Internet Security 2011

  Norton Utilities 14

  1 single antivirus running

  A previous audit of update 27/09/11.  I downloaded and installed manually updates failed.  I followed all the links from Microsoft and others.  I can't always check the updates.  The update is running for hours and then said: he can't check the updates.  My pc can't sleep or turn off automatically.  I tried the fixes recommended running but can not install them.  The program runs for hours.  I can only stop it by using the power button to turn it off.  Everything seems to work fine otherwise.  I use Norton Internet Security 2011.  There are no viruses or other problems, he can find.  I ran the disk check, no errors have been detected.  I spent hours trying to solve this problem.  Every step seems to take me one step closer to an answer, but not enough to solve the problem.  Any ideas?  The updates have been downloaded and has not installed were all related to the .NET Framework 4.0.  NET 4.0 has been installed on my PC in 2009.

  Hello

  Tried all of these options with no improvement.  Stumbled upon an answer that described enter deeply into the Windows registry.  (I do not remember where it was.)  I had checked before, some of these files, but not these.  Some of the updated files were missing.  I backed up everything and put the recovery disk in.  Success at last!   My PC and I are both happy now.  I'll bring back had more than 100 updates that should be downloaded and installed.  I didn't know if I'd do them all at once, so I started with some of the older ones, but they have not all install. Then checked to install them all.  Updates made in the order of most importance and in the right order needed.  I had to do some updates more than he has found since then.  I am really satisfied with the result.  I'm going to put programs and files back on my PC for some time, but I'm not tearing my hair.  Maybe this will help someone else.   Thanks for the suggestions, all help to improve my knowledge about computers.

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• PC with Vista sp2 I can backup and reinstall on the new PC with Windows 7?

  I bought a new PC with Windows 7 and you want to back up my old PC running Windows Vista SP2. Can I do a total back up and reinstall without jeopardizing the Windows 7? Or y at - it a program that moves from programs for me, instead of a return to the top?

  Hello

  You don't give enough information:

  Read this about the legality of moving from an operating system:

  If the computer/laptop came with Windows Vista preinstalled operating system (Dell, HP, Acer, etc.), this product key provided with your computer/laptop to the OEM license preinstalled and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ______________________________________________

  Years although it was licensed for retail sales of a clone of Vista that you want to move in all probability if boot not that this image contains drivers for the old Vista, not the most recent motherboard on Windows 7 computer.

  And programs need to be reinstalled from the original media.

  See you soon.

• I lost all the sound elements of the vista Media Center! How can I fix the problem?

  I have vista Home premium op sys and my media center windows lost audio output. Wheather read files from my hard drive or a DVD. mEDIA PLAYER has SOUND BUT NOT MEDIA CENTER. How can I fix the problem?

  Hello
  • What were the changes made before the problem occurred?
   
  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

• I have Vista SP2 and I have a problem with my sidebar... as many others do.

  My sidebar has not worked for some time I ran the command prompt sfc/scan and found no errors in the sidebar, it shows my gadgets, but they don't work... loads of the sidebar and gadgets do not work IE. the clock gadget will load but the hands do not move and are glued directly to the top of the background is all black. I also tried the fix DPI adapting it to 120 and that didn't fix either. Also im now using IE9 not IE8 for a browser. Now, I have also tried the reg commands and deleted the file settings.ini and still nothing... PLEASE HELP ME!

  Have you used ALL of the above methods?

  If the clean boot did not allow the sidebar to load or work then it is probably corrupted
  and you need to do the other steps.

  When you have uninstalled McAfee have you run the McAfee removal tool to avoid problems
  remnants of the original?  If this does not work now.

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  =================

  If you used ALL the previous methods and run the McAfee removal tool then maybe a
  Upgrade/repair on-site installation could help. This allows you to keep the programs
  and although redundant data backups are always a good idea. (It's less likely to work if)
  you do not use the previous methos in full under the same parameters and conditions would still be
  be in force.)

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• Cannot install Vista SP2 (or any other update) even after the KB947821 application

  I tried for months getting my wife's cell phone to install SP2 and other updates of security, but they keep failing.  Microsoft's response is to use the analysis tool... but it does not work.

  Unlike some others, the tool reports having installed successfully (KB947821v12) but I then try to install SP2 (or other updates from windows update) and I get an error message.

  The system is a Dell inspiron 1525 Dual core * address email is removed from the privacy * and 3 GB RAM under Vista Home Premium, SP1 (32-bit).  System Norton antivirus installed, licensed and fully updated. I've removed almost any other piece of software besides the pilots, office 2007, and Norton, run a registry cleaning tool, defragmented the drive hard, etc.  Still getting the same error.

  Try to install SP2 (KB948465) starting from the .exe downloaded from microsoft (have tried so many times, I couldn't wait to download each time!), gives me the message "Installtion failed", details show the 0x800f081f error code

  Through windows update, I have the following four updates available, I have several times to install these and get the error code 8007371B for all:

  • KB2508272 (Cumulative security update)
  • IE8 - 8007371B (also tried to install IE8 by uploading it directly on the site of ms, as opposed to windows update)
  • KB2079403 (security update)
  • KB956250 (.net 3.5 Sp1 update)
  • KB68930 (Windows PowerShell 2.0)

  Come to be able to install KB890830 today (27/04/2011), but even after installing that others do not work!

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  'Something' interferes with operations in Windows\winsxs. This 'thing' is Norton or malware. Have you checked one of the logs generated by the update system (or CheckSUR) tool when he was executed?
  They are located in and named it.

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  It looks like you will need to either Configure the system to boot or uninstall Norton, then run is the removal tool, in order to resolve the error, 8007371 B, elrao.

  At the moment, it may be too late to solve the inconsistencies that are produce in winsxs. Your other options are-

  (1) contact Microsoft for assistance in obtaining the security updates installed (KB2508272 or KB2079403). However, KB2078403 was published last summer, and should be installed now. This isn't a good sign.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• I have XP SP2 and am unable to install SP3. Problems with Windows install & download manager.

  I rebuilt a laptop from scratch using XP Home.  Currently, no software beyond basic MS core apps.  Not even MS Office.  I am trying to activate the automatic updates.

  The error messages that I get point to Windows Installer and/or MS Download Manager, but these same problems prevent me from deleting/updating install or Download Manager.

  If I run FixIt to activate the automatic updates to download SP3, the following error message is returned:
  _Windows Installer_
  The Windows Installer Service could not be accessed.
  This can occur if Windows Installer is not correctly
  installed.  Contact your support team.

  If I try to manually download the SP3 (WindowsXP-KB936929-SP3 - x 86 - ENU.exe), the following error is returned:
  _Microsoft download Manager_
  There was a problem opennig the Microsoft Download Manager.
  Update your computer with Windows Service Pack 2 or later version to download
  files using the Microsoft Download Manager.

  I think I'll through in circles.   I need SP3 for automatic updates, but impossible to install SP3 since SP3 is not installed.  I must be missing something obvious, but I simply cannot get by.  I'd appreciate any help - thanks.

  OK, I followed the link clicked on download, saved on my desktop, then tried to start the installation.  The returned message is:

  It is often the result of a corrupted download. Please restart the download. If this fails, you can try download with another browser such as Firefox or Chrome?

  Another possibility is malware that you have scanned with your preferred 'egi' software?

  Other free malware scanners...

  MBAM and SAS are glowing on this forum of many contributors. Other freebies are AVG and Avast.

  Tricky

• I have Vista Home Edition. Same thing after downloading the Microsoft updates.

  However, I do a restore and I get it all back. I want a fix for this, not a reference to another site. (How I wish I could still get a service representative with a name like Mike or Sally!)  I'm ready to abandon this computer and buy a new one with Windows 7 above.  Or do I really want to switch to a Mac?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Vista cannot restore unable system start to solve the problem - can not find an error code.

  On May 25, 2013, my computer Vista was off not correctly.

  The power of Vista computer was suddenly cut.
  Then, I can not start the computer normally.
  The guard computer loop right on these screens when I choose normal reboot:
  1 splash screen
  2 screen telling me to choose the restoration of the normal restart or system
  3. (after choosing normal restart) a black screen
  4. a blue screen with a few words but it flashed too quickly that I can't read any word. ---> TO 1
  I tried restarting the system once, but the Vista computer has always failed to start.  What should I do?

  Hello

  1. You're able to boot in safe mode?
  2. What is the brand and model of the computer?

  We will disable the auto reboot first. It prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  Now give us the exact error code?

  You can also make reference to: what to do if Windows does not start correctly

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Please post back with the State of the question.

• Will I have to reactivate windows 7 after this update of the problems?

  I've been using Microsoft Flight Simulator X Demo for a few weeks, but my material is not good enough to get a reasonable rate.
  I love the program, so I bought a copy of Microsoft Flight Simulator Gold edition.
  Before installing my copy of FSX Gold, I would like to update some of my hardware.

  My current set up is:

  Windows 7 Professional w/SP1 64-bit bought Jan 2012
  ASRock M3A770DE 770 Socket AM3 8 Channel Audio ATX motherboard.
  AMD Athlon II X 3 455 3.3 GHz Socket AM3.
  Memory: Crucial 8GB Kit (4GBx2) DDR3 PC3-12800.
  ATA (boot) hard drive ST3200822A (200G) purchased 2006 Jan.
  Silicon image Sil 3114 SATA Raid controller.
  Card PCI-E SAPPHIRE HD 6450 1 GB DDR3 DVI - VGA - HDMI
  DVD - ROM drive.

  I intend to do the following:
  Keep the original motherboard Asrock M3A770DE, Crucial memory, raid controller and DVD - ROM.
  Upgrade the processor AMD Athlon II X 3 455 with an AMD Phenom II x 6 1100t.
  Update the graphics card Sapphire HD 6450 with an Asus Nvidia GeForce GTX 750 Ti.
  Replace the hard drive ST3200822A with a 250 GB WD Velociraptor, the ST3200822A is eight years and well beyond its life expectancy.

  The old processor and graphics card is going to be scrapped because they are very little value.
  The old ST3200822A will be partitioned and formatted.

  This will give me problems with the reactivation of windows 7?
  I can't afford to buy another copy of Windows 7.

  Thank you very much
  Steven.

  Yes, since you do not migrate the motherboard, you should be good. You will still need to reactivate by telephone but, so keep this in mind:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.