Prohibitory sign with a twist

Similar Questions

• Prohibitory sign during MacBookAir setup

  you just bought macbook air 13 "2016. in the implementation of Mac no longer. I waited more than 45 minutes and then lower it. When you turn again a prohibitory sign appear.

  What should I do?

  Hey nealfer,

  I understand that your new MacBook Air is a symbol of ban starting after trying to implement. Let's go on how you can solve this problem, so you can enjoy your Mac.

  The reason why you see is that your Mac has a problem with the startup of the system folder. It could have happened while you were putting in place or data migration. The good news is that can be fixed by reinstalling the OS X or macOS version supplied with your MacBook Air. Take a look at the information below that will explain the screens during startup. It also has a link to guide you through the stages of resettlement.
  
  

  Symbol ban

  

  When you see a circle with a symbol of slash instead of the Apple logo, it means that your Mac could not find a valid system folder at the start of.

  If you use your Mac to a school or business, he might try to start from the wrong version of Mac OS X. Contact your IT Department for assistance.

  If it's your personal Mac, try reinstalling OS X using OS X Recovery.

  On the screens you see when your Mac starts up
  https://support.Apple.com/en-us/HT204156

  Take it easy!

• prohibitory signs but any withdrawal fine

  two days I received the Prohibitory sign up during startup. I searched the forums and googled around, but nobody has presented the same case.

  then that prohibitory sign was present, I was able to boot in safe mode, all saved. diskutil showed no problems with the hard disk, except the problem card partition but diskutil has not fixed it.

  now, I tried to start in mode single mouser, but received error cache kernel 0 x 6

  I started in safe mode, and everything was working fine... decided the formats and wipe everything. but before that, I did diagnostics equipment including the long version, but with no sign of hardware problem.

  has decided to format the HD and reinstall el Capitan...

  installation was made, started normally, set up my mac as good as new. restarted again to check if everything starts fine, but the prohibitive sign showed once again. Started by external hard drive, and performed first aid and it started again very well.

  was the PRAM/NVRAM and reset the SMC but no change.

  I don't know what the computer problem, especially that this single user with error cache kernel 0 x 6

  More information, five weeks until this problem presents itself, I modified the EFI to start like a black screen with the apple logo instead of the gray, with forum mac-forum/github.

  PS I am writing this same MacBook pro mid 2012 which is dealing with prohibitory signs.

  Any help would be appreciated... at the present time, the macbook pro is a clean installation with nothing installed on it, including third party software

  I would certainly run Apple Hardware Test.  There is a guide here on how to do it.  This error usually indicates a problem with the installation of the system, so I would try to repair the drive once more.

• The file is signed with a digital signature that is broken, published by: Mozilla Corporation.

  My anti-virus gives me the following message is displayed:
  "C:\Users\MArendas\Downloads\Firefox Setup 13.0.exe"; "The file is signed with a digital signature that is broken, published by: Mozilla Corporation. « ; » »
  Why and what do I do about it?

  Go to your download folder (click Start, click the account name above 'documents' then click on 'Downloads'. Remove it from there.

• Why can't I sign with my old password? To reset?

  Original title: WHY I can't SIGN WITH the OLD PASSWORD, MUST to RESERT?

  WHY CAN'T I JUST SIGN WITH THE OLD PASSWORD, MUST TO RESERT?

  Hello

  Password reset will protect your computer against hackers and it helps keep your computer more secure by changing your Windows password regularly, and by using a strong password.

  For your reference: How to connect to your Windows XP-based computer if you forget your password or if your password expires on: http://support.microsoft.com/kb/321305

  Hope this information is useful.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• AVG found that Windows\xreg.exe has been signed with a digital signature broken by Leader Technologies

  AVG found that Windows\xreg.exe has been signed with a digital signature broken by Leader Technologies. Is - this someinthg, I'd be worried?

  See you soon

  KF

  Hi KieranFitzgibbon,

  1. did you of recent changes on the computer?

  2. are you referring to the xreg.exe or ereg.exe?

  If his ereg.exe, then it is related to the registration of Logitech products.

  Method 1

  I suggest that use you the Microsoft safety scanner to remove the infections of viruses or malware to the computer and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Method 2

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• _ "Detection name; "The file is signed with a digital signature that is broken, published by: Microsoft Corporation. "___What is what this means, how can I fix it? Thanks___ "history of the Action; "" "__what t - it means and how to fix? __thanks

  It's on my securitytab when I scan my computer.__C:\Acer\Empowering Technology\eRecovery\autorun\CPP\CDM__The file is signed with a broken digital signature issued by Microsoft corporation. What this mean, how do I fix it? Thank you

  I go back to avg 8.5 and it solved my problem with the broken digital signature.

• Help! File is signed with a digital signature of broker issued by HP?

  When I use AGV to scan my computer also says: the file is signed with a signature digital broker issued by HP and listed below: what do I need to worry?

  'C:\Windows\Installer\4256e.msi '; "The file is signed with a digital signature that is broken, published by: Microsoft Corporation. »
  'C:\Windows\Installer\4ef25.msi '; "The file is signed with a digital signature that is broken, published by: Smith Micro Software. »
  'C:\Windows\Installer\5b13a.msi '; "The file is signed with a digital signature that is broken, published by: Microsoft Corporation. »
  'C:\Windows\Installer\5d75f.msi '; "The file is signed with a digital signature that is broken, published by: Microsoft Corporation. »
  'C:\Windows\Installer\5d764.msi '; "The file is signed with a digital signature that is broken, published by: Microsoft Corporation. »
  'C:\Windows\Installer\8c2e5.msi '; "" The file is signed with a digital signature that is broken, published by: Apple Inc. ".
  'C:\Windows\Installer\8cab8.msi '; "" The file is signed with a digital signature that is broken, published by: Apple Inc. ".

  Hi jambros,

  · You have several security software installed on your computer?

  A digital signature is an electronic security mark that can be added to the files. It allows you to verify the Publisher of a file and helps verify that the file has not changed since it has been digitally signed.

  If the file does not have a valid digital signature, has no way for you make sure that the file is actually from the source, of what he wants, or that he didn't has not been tampered with (possibly by a virus) since its publication.

  I see many users who ran the scan on their computers using the software AVG anti-virus is facing error messages similar.

  Return return to previous versions of AVG has solved it concern. You can see an example of the same thing:http://social.answers.microsoft.com/Forums/en-US/xphardware/thread/8445d911-ebb0-4292-96ba-749de4fcb672

  If you have more security software is installed on the computer, I suggest you to uninstall the security software.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The file is signed with digital signature is broken, published by: VideoSoft

  When I run the antivirus it comes up with the following legend:

  The file is signed with a digital signature that is broken, published by: VideoSoft
  

  Windows\System32\Vsflex6.ocx

  Help

  Thank you

  Hi Charlydue,

  A digital signature is an electronic security mark that can be added to the files. It allows you to verify the Publisher of a file and helps verify that the file has not changed since it has been digitally signed.

  If the file does not have a valid digital signature, has no way for you make sure that the file is actually from the source, of what he wants, or that he didn't has not been tampered with (possibly by a virus) since its publication. It is safer to avoid opening the file unless you know for certain who created it and if the content is safe to open it.

  Even a valid digital signature does not verify the content of the file is harmless. You need to decide if you should trust the contents of the file based on the Publisher's identity and where you download the file from.

  Try upgrading to the latest version of VideoSoft and check if the error disappears. Also, contact the software vendor for assistance.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• New version of the app is signed with old/invalid signature keys

  Hello

  My Forte.fm application (the only Rdio cirrently client available for BB10), broke from the OS 10.1. I put off fixing it because I had passed to Android, but I want to make it work again. It's a WebWorks app, and the versions currently in App World are signed with the old style keys. I tried a number of different methods of conversion/link my old signature with my BBID keys, but nothing that I've done the work. The closest I came to a successful outing is an App World error, saying: the keys are incompatible with previous versions.

  At this point, I just want to sign it with my new keys, but I can't download on App World from my existing application bears the same name. Because the app is broken for 2 years, I don't think it would be much of a loss to wipe out the 50 + 1 star reviews that said: it's broken.

  I built this app as sort of a 'labor of love' because I can't charge due to conditions of use Rdio. Really, I'd like to see people who can use it and get some good reviews for an application that works fine in a browser and on Android.

  I couldn't find info of direct contact for support to BlackBerry developers, so I'll also here: can someone help me get a working version of newly signed my existing application?

  For the curious, the app was introduced with a flourish by launching:
  http://CrackBerry.com/no-RDIO-app-BlackBerry-10-yet-try-fortefm

  You can use the linked form to below to ask that the BlackBerry World supplier management team reset your existing Package ID.  This will allow you to download a new version signed with a different key.

  BlackBerry Support global provider

• Must be signed with the RIM Runtime Code Signing Key (RRT) - example of code bar

  Hi, when I try to start the bardcode example in my device (9780 Smartphone), I get

  "Error starting BarCodeApp: Module 'BarCodeApp' must be signed with the RIM Code Signing Key (RRT) DURATION.

  The only class I have in my project is:

  import java.util.Hashtable;
  import java.util.Vector;
  
  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.barcodelib.BarcodeBitmap;
  import net.rim.device.api.barcodelib.BarcodeDecoder;
  import net.rim.device.api.barcodelib.BarcodeDecoderListener;
  import net.rim.device.api.barcodelib.BarcodeScanner;
  import net.rim.device.api.command.Command;
  import net.rim.device.api.command.CommandHandler;
  import net.rim.device.api.command.ReadOnlyCommandMetadata;
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.KeyListener;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Keypad;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.XYEdges;
  import net.rim.device.api.ui.component.BitmapField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.EditField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.FullScreen;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.decor.BorderFactory;
  import net.rim.device.api.ui.toolbar.ToolbarButtonField;
  import net.rim.device.api.ui.toolbar.ToolbarManager;
  import net.rim.device.api.util.StringProvider;
  
  import com.google.zxing.BarcodeFormat;
  import com.google.zxing.DecodeHintType;
  import com.google.zxing.common.ByteMatrix;
  import com.google.zxing.qrcode.decoder.ErrorCorrectionLevel;
  import com.google.zxing.qrcode.encoder.Encoder;
  import com.google.zxing.qrcode.encoder.QRCode;
  
  /***
   * Barcode API Sample
   * 
  
   * This application demonstrates the most common use of the Barcode API: 1)
   * Creating and displaying a QR code, 2) Scanning a QR code and opening the
   * browser pointing to that URL. It could be easily modified to scan/create
   * other kinds of barcodes, or do other things with the scanned/created barcode.
   *
   * @author PBernhardt
   *
   */
  public class BarcodeAPISample extends UiApplication {
  
      //This controls how big barcode we will display is to be
      private static final int BARCODE_WIDTH = 300;
  
      // This is the app itself
      private static BarcodeAPISample _app;
  
      // Errors will be logged here
      private LabelField _logField;
  
      // The main screen which holds the toolbar and displayed barcode
      private MainScreen _mainScreen;
  
      // The barcode is displayed here
      private BitmapField _barcodeField;
      // The text stored here is converted into a barcode by the user
      private EditField _barcodeTextField; 
  
      // This controls the scanning of barcodes
      private BarcodeScanner _scanner; 
  
      // This screen is where the viewfinderf or the barcode scanner is displayed
      private FullScreen _barcodeScreen;
  
      public BarcodeAPISample() {
          // New screen
          _mainScreen = new MainScreen();
  
          // Create the log field so it can be used in this constructor
          _logField = new LabelField("Log: ");
  
          // Create the place-holder for the barcode image and add it to the main
          // screen
          _barcodeField = new BitmapField(new Bitmap(BARCODE_WIDTH, BARCODE_WIDTH), Field.FIELD_HCENTER);
          _barcodeField.setBorder(BorderFactory.createBevelBorder(new XYEdges(2, 2, 2, 2)));
          _mainScreen.add(_barcodeField);
  
          // Create and add the field to store the barcode contents
          _barcodeTextField = new EditField("Barcode text: ", "http://devblog.blackberry.com");
          _mainScreen.add(_barcodeTextField);
  
          // Add "display barcode" and "scan barcode" toolbar buttons
          /**
           * This is a quick example of the new (in 6.0)
           * net.rim.device.api.command package and the
           * net.rim.device.api.ui.toolbar package. All it does is invoke the
           * displayBarcode() or scanBarcode() method when you click the
           * corresponding button. For more details on this package, see the
           * JavaDocs or elsewhere in the Developer Resource Center
           */
          ToolbarManager toolbar = new ToolbarManager();
  
          ToolbarButtonField displayBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Display"));
          displayBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  displayBarcode();
              }
          }));
          toolbar.add(displayBarcodeToolbarButtonField);
  
          ToolbarButtonField scanBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Scan"));
          scanBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  scanBarcode();
  
              }
          }));
          toolbar.add(scanBarcodeToolbarButtonField);
  
          _mainScreen.setToolbar(toolbar);
  
          // Add the log field to the bottom
          _mainScreen.add(_logField);
  
          pushScreen(_mainScreen);
      }
  
      // Simply create the the app and enter the event dispatcher
      public static void main(String[] args) {
          _app = new BarcodeAPISample();
          _app.enterEventDispatcher();
  
      }
  
      /**
       * displayBarcode
       * 
  
       * This method will take the text in the _barcodeTextField, convert it into
       * a QRCode and display it on the main screen. It could be easily modified
       * to use a different barcode format or to get the text from somewhere else.
       */
      private void displayBarcode() {
          try {
              QRCode qrCode = new QRCode();
  
              // This encodes the text with a low level (%7) of error correction
              Encoder.encode(_barcodeTextField.getText(), ErrorCorrectionLevel.L, qrCode);
  
              // From there we get the actual data matrix and convert it into a
              // bitmap
              ByteMatrix barcode = qrCode.getMatrix();
              Bitmap bitmap = BarcodeBitmap.createBitmap(barcode, BARCODE_WIDTH);
  
              _barcodeField.setBitmap(bitmap);
  
          } catch (Exception e) {
              log("Exception: " + e);
          }
      }
  
      private void scanBarcode() {
          // If we haven't scanned before, we will set up our barcode scanner
          if (_barcodeScreen == null) {
  
              // First we create a hashtable to hold all of the hints that we can
              // give the API about how we want to scan a barcode to improve speed
              // and accuracy.
              Hashtable hints = new Hashtable();
  
              // The first thing going in is a list of formats. We could look for
              // more than one at a time, but it's much slower.
              Vector formats = new Vector();
              formats.addElement(BarcodeFormat.QR_CODE);
              hints.put(DecodeHintType.POSSIBLE_FORMATS, formats);
  
              // We will also use the "TRY_HARDER" flag to make sure we get an
              // accurate scan
              hints.put(DecodeHintType.TRY_HARDER, Boolean.TRUE);
  
              // We create a new decoder using those hints
              BarcodeDecoder decoder = new BarcodeDecoder(hints);
  
              // Finally we can create the actual scanner with a decoder and a
              // listener that will handle the data stored in the barcode. We put
              // that in our view screen to handle the display.
              try {
                  _scanner = new BarcodeScanner(decoder, new MyBarcodeDecoderListener());
                  _barcodeScreen = new MyBarcodeScannerViewScreen(_scanner);
  
              } catch (Exception e) {
                  log("Could not initialize barcode scanner: " + e);
                  return;
              }
          }
  
          // If we get here, all the barcode scanning infrastructure should be set
          // up, so all we have to do is start the scan and display the viewfinder
          try {
              _scanner.startScan();
              _app.pushScreen(_barcodeScreen);
          } catch (Exception e) {
              log("Could not start scan: " + e);
          }
  
      }
  
      /***
       * MyBarcodeDecoderListener
       * 
  
       * This BarcodeDecoverListener implementation tries to open any data encoded
       * in a barcode in the browser.
       *
       * @author PBernhardt
       *
       **/
      private class MyBarcodeDecoderListener implements BarcodeDecoderListener {
  
          public void barcodeDecoded(final String rawText) {
  
              // First pop the viewfinder screen off of the stack so we can see
              // the main app
              _app.invokeLater(new Runnable() {
                  public void run() {
                      _app.popScreen(_barcodeScreen);
  
                  }
              });
  
              // We will use a StringBuffer to create our message as every String
              // concatenation creates a new Object
              final StringBuffer message = new StringBuffer("Would you like to open the browser pointing to \"");
              message.append(rawText);
              message.append("\"?");
              log(message.toString());
              _barcodeScreen.invalidate();
  
              // Prompt the user to open the browser pointing at the URL we
              // scanned
              _app.invokeLater(new Runnable() {
                  public void run() {
                      if (Dialog.ask(Dialog.D_YES_NO, message.toString()) == Dialog.YES) {
  
                          // Get the default sessionBrowserSession
                          BrowserSession browserSession = Browser.getDefaultSession();
                          // Launch the URL
                          browserSession.displayPage(rawText);
                      }
                  }
              });
          }
  
      }
  
      /***
       * MyBarcodeScannerViewScreen
       * 
  
       * This view screen is simply an extension of MainScreen that will hold our
       * scanner's viewfinder, and handle cleanly stopping the scan if the user
       * decides they want to abort via the back button.
       *
       * @author PBernhardt
       *
       */
      private class MyBarcodeScannerViewScreen extends MainScreen {
  
          public MyBarcodeScannerViewScreen(BarcodeScanner scanner) {
              super();
              try {
                  // Get the viewfinder and add it to the screen
                  _scanner.getVideoControl().setDisplayFullScreen(true);
                  Field viewFinder = _scanner.getViewfinder();
                  this.add(viewFinder);
  
                  // Create and add our key listener to the screen
                  this.addKeyListener(new MyKeyListener());
  
              } catch (Exception e) {
                  log("Error creating view screen: " + e);
              }
  
          }
  
          /***
           * MyKeyListener
           * 
  
           * This KeyListener will stop the current scan cleanly when the back
           * button is pressed, and then pop the viewfinder off the stack.
           *
           * @author PBernhardt
           *
           */
          private class MyKeyListener implements KeyListener {
  
              public boolean keyDown(int keycode, int time) {
  
                  // First convert the keycode into an actual key event, taking
                  // modifiers into account
                  int key = Keypad.key(keycode);
  
                  // From there we can compare against the escape key constant. If
                  // we get it, we stop the scan and pop this screen off the stack
                  if (key == Keypad.KEY_ESCAPE) {
                      try {
                          _scanner.stopScan();
                      } catch (Exception e) {
                          log("Error stopping scan: " + e);
                      }
                      _app.invokeLater(new Runnable() {
                          public void run() {
                              _app.popScreen(_barcodeScreen);
  
                          }
                      });
  
                      return true;
  
                  }
                  // Otherwise, we'll return false so as not to consume the
                  // keyDown event
                  return false;
              }
  
              // We will only act on the keyDown event
              public boolean keyChar(char key, int status, int time) {
                  return false;
              }
  
              public boolean keyRepeat(int keycode, int time) {
                  return false;
              }
  
              public boolean keyStatus(int keycode, int time) {
                  return false;
              }
  
              public boolean keyUp(int keycode, int time) {
                  return false;
              }
  
          }
      }
  
      /***
       * log
       * 
  
       * Writes a message to an edit field for debug purposes. Also sends to
       * STDOUT.
       * 
  
       *
       * @param msg
       *            - The String to log
       */
      public void log(final String msg) {
          invokeLater(new Runnable() {
              public void run() {
                  _logField.setText(_logField.getText() + "\n" + msg);
                  System.out.println(msg);
              }
          });
      }
  }
  

  My request is properly signed and work very well in the Simulator.

  Thanks in advance.

  Solved.  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

• Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code

  Hi all

  Help me please

  I signed my code files with the signign provided blackberry (RRT, CPR, RBB) keys. When I download my application via OTA in my camera, and when I run my application it shows an error like "start Testapp error: ' Module: TestApp-1" must be signed with the Runtime RIM signing key code ".so I signed my application code files, when I opened TestApp-1 to sign it indicates"no signature required"."

  Please anyone suggest me.

  Thank you

  Ashutosh

  I think that JDE currupted. When I compile it with different JDE, he executed well.

  Thank you all to share your experiencewith me.

• Black white page, rather than the page of the screen and normal startup applications, once I signed with my password.

  Hello
  In may 2013, I bought a new laptop with Windows 8 pre installed system.
  Now, all of a sudden, after signing with password etc, all I get is a black and white page instead of the splash screen and apps showing. The mouse cursor is visible on the white screen and can be moved to ok. Unfortunately, it is that he will. I seem to be able to access some of my documets using the keys Ctrl/Alt/Del, which is strange.
  Can you offer help with my problem?
  Thank you

  I have a Samsung SideSync Homesync lite and two days ago I suddenly had the same symptoms as you all - a blank screen after trying to open a session.  I tried the Ctrl/Alt/Delete road but no change to this problem.  I have however to solve the problem using the following route:

  1. go to the LOGIN screen

  2 hold down the SHIFT key

  3. click on the power bottom-right icon

  4. in the Menu that opens select Restart (yet now shift key)

  5. in the Menu that opens select troubleshooting

  6 in the next menu, select Advanced Options

  7. in the next menu, select auto repair.  The computer will try to fix the problem.

  8 if the auto repair does not repair the problem back to 5.  and select troubleshooting.

  9. Select Refresh your PC note what's going to happen and if this is acceptable to you then:

  10 then select and open a session according to the instructions.

  11. your PC will be update and cure your problem - it did mine.

  Note the update process takes awhile then works in the network not the battery.

  I think that the problem is the last update of Windows tried to install before a prior update was carried out.  Moral: make sure that your windows updates are up-to-date.

• Mozilla updated to 50.0 and avg gave me a notification that a mozilla file is signed with a digital signature that is broken. Is this bad?

  November 16 mozilla set updated to 50.0. When I run a whole computer scan avg gave me the following notification:

  Threat: The file is signed with a digital signature that is broken, published by: AVG technologies

  Name of the object: c:/users/user/appdata/local/mozilla/firefox/profiles/2dq9g2pq.default/cache2/ entries/D0A23281D4B51CD3D3525DF4C91B8CE28F1EC36F

  I tried to find the location, but I couldn't. Can you help me?

  The Cache is where Firefox stores temporary information. If him are concerned,

  https://support.Mozilla.org/en-us/KB/how-clear-Firefox-cache