I have windows 7 computer. When you try to stop, the sleep option is visible but not active.

Similar Questions

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• Warning it can influence on the computer when you try to use the Flash Player

  Original title: Flash Drive case

  I just started using the external drive and flash drive to increase the PC space.  I tried to remove some files of music from the flash drive. Got a warning box that if I continue I can have an impact on the computer or the software. If I continue. If I'm stuck with a flash drive with unusable area?

  Hi Russ Alan,

  You will get a message to Scan Flash and continue when the Flash drive is infected.

  When you get the message scanner the Flash disk, you can try to scan and continue.

  You can also run a scan on your computer.

  Check out the link:

  http://OneCare.live.com/site/en-us/default.htm?s_cid=SAH

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Explorer crashes when you try to make the list of associated file types. Error: 0xc0000005

  This is the view in the general tab of the event viewer. Looks like a problem ole32.dll but I don't know what to do. I have Win 7.

  The failing application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aeba271

  The failed module name: ole32.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdac7

  Exception code: 0xc0000005

  Offset: 0x0002af88

  ID of the process failed: 0x1bfc

  Start time of application vulnerabilities: 0x01cafc16e3fb0780

  The failing application path: C:\Windows\Explorer.EXE

  The failed module path: C:\Windows\system32\ole32.dll

  Report ID: 605a0c40-680a-11df-b86a-001e90f0c8af

  Thank you

  Brian

  Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

  If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:

  HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\

  In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrivefile.

  (Letter is an environment variable that represents the system drive, usually C:.)

• I have an error: DW021 when you try to download the trial version of PS.

  I am trying to download the trial version of Ps and get the error above?

  Please visit: Error 21 or DW021 when installing Photoshop CC 2015

• Get "Error Code 646" when you try to download the update KB957789 for update is not installed

  I tried everything to be able to install the KB957789 update which is an update of security for Microsoft PowerPoint 2007.  I was able to install some other updates correctly, but it will not be installed.  It has been a few days now that I've tried because comes this update on 5/11 I think.  It gives me this message: "error...". Code 646 Windows Update encountered an unknown error. "I have a Dell Inspiron E1505 with Windows Vista Premium and I have 1 installed SP and each update installed on it as well.  Please help me with this problem.  Thank you very much.

  You can also try to re - install Office. That might solve your problems, or that we will know if the ir problem from Windows or if there is a problem with Office
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• When you try to open the Junk folder in Mail on my PC it will not load.

  Original title: Mail in Windows 8

  When you try to open the Junk folder in Mail on my PC it does not, the rest of the files are fine. I access distance without and questions

  Can someone help / advise

  Thank you very much

  Hello

  Thanks for the reply and we update on the State of the question.

  It seems to be a problem with the Mail application in this case. I would ask that you run the troubleshooter App and also follow the troubleshooting provided in the link below steps to solve the problem with applications in Windows 8.

  Solve problems with a soft

  Do not respond to the State of the question, so that we can help you further.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database of your application]

  I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database that your application recognizes, or the file may be corrupt,.] Everything worked very well this fault has just come. Anyone know how to solve this problem.

  Settle into the Photoshop Elements forum.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.