I have windows 7 on drive C and D (doesn't), I want to formate D how do?

Similar Questions

• I have windows vista on this computer and I want to remove it and add windows xp.

  I have Windows Vista on this computer and I want to remove it and replace it with Windows XP Professional.  Whenever I tried to do, I succumbed. I tried to just boot from the cd and install xp and it tells me that the version on the computer is newer than the one I am trying to install and then gives me no option besides. I left and I restarted in safe mode and the command propt tried to fdisk and he said no authorized for this.  When I try to format it is said that volume id and I don't know who.  I've never been so lost trying to remove a platform in my life.  I would like to have an answer to this problem, thanks and have a blessed day, Robin

  Hi Robin,

  ·         What is the type of disc you are having? It's a drive to upgrade or full version?

  ·         How many partitions are present on the computer?

  ·         Why would you downgrade from Windows Vista to Windows XP?

  You need demarrer start from the installation disc, choose the partition where Windows is installed (ideally the C drive). Format it and then go to the Windows XP installation.

  Let us know if you need more assistance.

• RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE.

  RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE. I GET THE MESSAGE 'THIS PRODUCT NOT DESIGNED FOR YOUR OPERATING SYSTEM' I TRIED TO GO ON THE LABTEC WEB SITE AND DOWNLOAD DRIVER FROM HERE, BUT STILL WILL NOT WORK. CAN ANYONE HELP?

  Hello

  Please, do not type in capital letters as it is difficult to read and considered to be shouting.

  -----------------------------------

  As you know that there are no Windows 7 drivers for this camera. Check with the support of Labec.

  Labtec Webcam software
  http://www.Labtec.com/index.cfm/service/listing/APAC/en, crid is 68, crid2 = 1764

  Labtec support
  http://www.Labtec.com/index.cfm/service/splash/APAC/en, CRID = 3

  ----------------------------------

  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or whatever the path
  is the folder where the driver is unpacked.

  In this case it would be \User\Your User Name\Camera_Folder CD and would look at the prompt:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used for)
  "no matter what guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Original title: iso to wim

  I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Thank you

  Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.

  Thank you!

• We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use? _ ___Windows IPod XP compatibility

  We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use?

  If you can install and run iTunes correctly, then I'm sure that sync with an iPod will work as well.

  What do you mean exactly with "add to iTunes"?

  Tim Baets
  http://www.BM-productions.TK

• Hi, I have windows 7 with explore 11 and system: Windows 64-bit, English, MSIE. My problem is when I click on a new video I get e message telling him that I have to update my Adobe Flash Player, if I click it and it takes me to your site for updates ok.

  Hi, I have windows 7 with explore 11 and system: Windows 64-bit, English, MSIE. My problem is when I click on a new video I get e message telling him that I have to update my Adobe Flash Player, if I click it and it takes me to your site for updates ok. I go through the steps 1 and 2 ok, but when the small screen for the Adobe Flash Player Downloader arrives, he remanins empty and nothing happens. So what to do the next update please.

  Please do not post the same question more than once!

• computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how do

  computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,

  Thank you.

  If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero.  You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• I have connected my iphone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  Your question has already been answered twice. Asking again will not change the answer.

• I have a free 30 day trial of the creative cloud I want to disable. How do I do that?

  I have a free 30 day trial of the creative cloud I want to disable. How do I do that?

  Free trial cannot be disabled or suspended. It will be off by itself after 30 days regardless of usage.

  Concerning

  Stéphane

• I get this error code 646 everytime I go to install the important updates. Updates failed to install. Have: Windows Vista editions Home Premium and laptop Toshiba Satellite. How to fix?

  For about 4 days, it says install important updates, I try and it manages not to install message says to try again, and he still fails to install important updates.  When I turned off my computer, the message says installation step 1... 2... 3..., but still, it will fail to install.  I never had a problem with it before.  Last week, I started having this problem.  It will not install updates importamnt.  Please help, I need to install my updates.  Thanks in advance.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have connected my phone to itunes and it asked if I want to spend yesterday I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g yesterday to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  This is because your phone has been hacked to unlock illegally. Update caused it to relock the initial carrier. Only the carrier so that it is locked can authorize to release.

• I have windows XP service Pack 3 and I can not install .NET Framework 1.1 SP1 KB2656370 and 353 updates I need Net framework to view my videos k p1

  I've updated my laptop windows XP computer to service pack 3 in February this year, now I can't see my Flip videos. I get about Net Framework error messages

  and I can't update Net Framework with my regular updates.
  Jean

  http://www.Adobe.com/

  Click on link above, and then, Adobe Flash Player under download.

  Adobe reads your computer and offers the correct file.

  It will show your system such as...

  Your system: Windows 32-bit, English, MSIE

  If this is not correct right underneath click on... You have another operating system or browser.

  When you search for updates, you should be notified including .NET you need.

  You can check which ones you have in Add / Remove programs.

  http://support.Microsoft.com/ph/548

• I have windows vista without any sp and I learn that the support for sp1 a few days later purposes. Can I install sp2 without sp1?

  And given that support ends for sp1 and ended last year for free from MS, windows update will not work for me as well as to download them?

  Can I order the DVD of one or two of microsoft?

  In http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I found below the address for orders, but it gives access denial of my pc.  Is it valid?

  https://OM2.one.Microsoft.com/OPA/validation.aspx?storeid=1a7e5dd8-0088-46ce-a7d3-8fa1ab523be0&LocaleCode=El-GR

  I contacted the local support (Athens, Greece) but they can do nothing for me, they said that MS DVD are not available locally.

  Hi Vassiliki,

  Unfortunately, if the files are infected you may very well end up having to re - install Windows. However, there are steps in this KB http://support.microsoft.com/kb/249694 to try to back up and restore Vista which may allow you to keep the programs you have.

  Another alternative would be to called a upgrade on the spot if you are sure that the files are cleaned and the infection is gone this solution should leave your programs and data intact and repair the damaged parts of Windows.