HP 61 black screan 401as

Similar Questions

• Black screan appears when you start windows7

  Original title: black screen

  I start my computer I'm going directly to a black screen with a blue windows logo and a circular timer loading

  in the bottom of the Center. I tried F8, esc, ctrl altr delete that nothing works. all ideas

  Hello

  Please contact the Microsoft community.

  As you said that your computer goes straight to a black screen with a blue logo of Windows and a circular loading timer at the bottom center. And also you have tried to press F8 for option ahead, nothing happens.

  I would like to ask a few questions about your question:

  1. What is the brand and model of the computer?

  2. Changes made to your computer before the show?

  3. Do you have a Windows 7 installation disc or repair disk?

  I suggest to follow the steps in the link below and check if it helps you.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  Please get back to us with the information in short. So that we can help you further.

• Satellite L300D - 12L: Error: MISSING BOOTMGR + HDD partition 2 corrupted

  Hello

  I recently bought my L300D - 12 laptop computer in a store Staples close to me (for use at the University). After about 4 months of use, the system seems slow, and yesterday, my laptop started giving me the BSOD messages whenever I tried to boot up the laptop and have to restart.
  I tried to use the safe mode to move all my files on a desktop computer and that seemed to work well sometimes even safemode could not start with a BSOD with [memory management error] coming and sometimes IQRL_Less or equal...
  I can also have accidentally deleted partition HDD 2... but I thought that it would be OK, because I had created a recovery disk already in the days following the purchase, and it works.

  So my problem is this, my laptop is now free of my files as I have carefully their saved with the storage devices removable mass via a defective safe mode; I have used the disk recovery... but clarification, I think I should list step by step what happens when I use the disk...

  (1) "Windows is loading files" (a black screen with a white bar at the bottom)
  Microsoft green loading bar 2)
  (3) utility recovery gray and white décor with "Recovery Utility" box telling me to choose a language (I choose English)
  (4)' Please select the item you want to install and click on [{Next >}.] Current recovery drive size is: 76GB (I choose then with "English (Windows Vista)" highlighted)
  (5)' WARNING: your hard drive will be completely erased. Do you want to continue?' (I click 'OK')
  (6) command prompt appears with the following...

  Verification of the HDD1
  HDD1 not found!
  Try to remove all possible partitions on the HARD disk letters 0...
  Try to remove all the possible partitions on 1 HARD drive letters...
  Microsoft DiskPark_Version 6.0.6001
  Copyright 1999-2007 Microsoft Corporation.
  On computer: MINWINPC

  Disk 0 is now the selected disk.
  DiskPart succeeded in erasing the disc.
  DiskPart succeeded in creating the specified partition.

  Partition 1 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  DiskPart succeeded in creating the specified partition.

  Partition 2 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  DiskPart succeeded in creating the specified partition.

  Partition 3 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Copy the files of database recovery
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  HTMPREP...
  Boot...
  EFI...
  HDDPREP...
  sources...
  Tools...
  Bootmgr...
  1 file (s) copied.
  Original setenv.ini...
  1 file (s) copied.
  Warn the HTML...
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Unzip the operating system and WinRE
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Set RECO_info_GUID = A5CD0EA6 - 2 = 4E10-8C6B-4902928583FB 02c
  Set RECO_info_imagecount = 2
  Set RECO_info_partnumber = 1
  Set RECO_info_numsplit = 5
  Set RECO_info_bootindex = 0

  Copy of F:\06738XSP.swm to V:\HDDRecovery.SWImg [1/5]
  1 file (s) copied.
  Copy of the CRC files
  1 file (s) copied.
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [2/5]
  1 file (s) copied.
  Copy of F:\06738XSP3.swm to V:\HDDRecovery.SWImg [3/5]
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [4/5]
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [5/5]
  1 file (s) copied.
  Setting permissions access to 'V:\HDDRecovery '...
  Unpack the WinRE...

  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.

  100% step
  The image is applied successfully.

  Unzip the Vista operating system...
  Image x tool for Windows
  Copyright Microsoft Corp. All rights reserved.

  Progress: 0% audit of the Splitloader...
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Configuration of Split charger
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  ERROR: No BCD on two or a partition!
  Press any key to continue

  (7) an error box comes up with

  "imagex.exe - Application error.
  The instruction at 0x776359c3 referenced memory at 0x527d838c. The memory could not be read.
  Click OK to terminate the program ' (I click OK)

  (8) at the command prompt, I press a key to continue. The cmdprmt stops and everything is empty...

  (9) I restart the computer
  (10) this happens on a black screan

  "BOOTMGR is missing".
  Press Ctrl + Alt + Delete to restart

  (11) the repetitions of cycle no matter how many times I run the recovery disk

  SO! I read a few issues with the recovery discs and most of the time the answers are buy one out of the toshiba site... my question is this...
  Based on my case above... do you think that the error is by damage or internal memory corruption?
  Is the recovery disk I can buy different from the one I created?

  WHAT ON EARTH IS GOING ON WITH MY LAPTOP AND HOW DO I FIX THIS!

  Post edited by: ArthurTYL

  Hello

  This error is interesting:
  > ERROR: no BCD on two or a partition!
  > Press any key to continue

  The BCd is the Vista bootloader which is necessary to load and start the Vista operating system.
  It seems that it is not found and so Vista will not start.

  The next error message saying: BOOTMGR is missing, press Ctrl + Alt + Del to restart would confirm my hypothesis.

  You said that your system slows down considerably.

  Possibly the HARD drive is faulty. I have only this one explanation.
  In your case, the warranty is valid, and I think you should ask the ASP in your country for assistance guys could check the HARD disk and other parts and could replace it.

  Good bye

• can't get back into windows after a system restore

  I ran a system restore on my desktop running windows vista edition Home premium 64-bit. half way through my screan saver restoration opened and collapsed the restoration ended. After a few hours I shut down the computer. now when I start my pc it runs all preliminary functions and allows me to choose to either start windows failure, safe with fast back or normal mode. If I choose the mode safe mode (with or without back) through a loading phase where it shows everybody that it loads, it stops on a cdc.dsk file, and then processes to a black screan. If I choose load windows normally it goes to a black screan. the windows vista I have is one that came with the pc, so I don't have the disks to run. is it possible to fix this or did I just turn a pc $1500 in a very expensive papper weight?

   

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Toshiba C855D laptop Windows 8 boot after automatic update failure

  My daughter bought a Toshiba C855D laptop there are a little over 2 weeks.  I helped create the DVD backup.  Unfortunately she forgot to take them with her when she returned to her job in another State.  Update from the laptop last night and restart it displays: "failed to start: a proper digital signature not found.» Select one of the files on the boot device has been rejected by the Secure Boot feature. "Her appeal until the recovery discs arrive by mail?

  I also work on a laptop with windows 8.  After a long conversation, that's what happened.  They bought for Christmas and installed Quicken and have been broadcast since.  Last week an update had completed and was stopped.  The owner stop and a few days later he turned on and with a few minutes of being on a Car Parts web site (NAPA), the locked system restarted with the same problem as icdesigner above.  I read a lot of tech ideas and that your giving, that's all they say.  Although it does not work for this system.  With security on there is a black screan with and error failed to start that stays on for about a minute then shut down the system.  With the security it starts with a blue screen that stays on with RCOVERY at the top.  The digital signature for this file could not be verified. 0xc0000428 error code.  Then he goes on to say to use the disc that came with the system to fix it. Well no disk came with it, but I was able to join the program of recovery once to restore the system to the factory.  Still getting error and can't now to the recovery program.  So is it possible that one of the updates is corrupt and rewrite the boot sector on hard drive?  I say this because when you do a complete reinstall as I did wipes everything except the boot sector.  You have all the other fixes that will work, remember that I can't go beyond these screans.  Mobile society has already said the owner that it will cost more than $300 to send it in, and it's almost what they paid.

• BlackBerry Z10 my BB Z10 does not start after the no shutdown reason cannot go home screan

  Dear expert

  pls help my problem

  My BB Z10 does not start after the no shutdown reason cannot go home screan

  How can I save my data and contact if I reload / back up the operating system how ever my phone cannot start and go home screan

  Thank you...

  Dear expert

  Thanks for your reply, but recognized link bb cant he showed a black berries knowledge so the transferdata button is impossible / cannot click. so I can't back up my files and data if I reloaded the OS. are there\s any idea/way of backing up my files if my phne was frozen?

  Thank you

• iPhone 7 more (Black - 128 GB) still "processing Elements"!

  Hello

  I ordered my iPhone more black 7 128 GB on September 9 in Dubai (pre-order day itself) and it showed that the delivery would be from 4 to 10 October. Today IS OCTOBER 4 and my order status is STILL "Of ELEMENTS OF TREATMENT." I don't understand why its always 'treatment Items' in the week of delivery.

  How would it take for the process to go further.

  If someone has an idea, pls let me know!

  Thanks for reading.
  Waiting for answers,
  See you soon!

  Hello

  You will receive a shipment notification when your order has been shipped, and to access the tracking information.

  I'm afraid that no one here can tell you when it will be.

  It is a community of support based on the user.

• IOS 10.0.2 cameras does not work (only in black)

  Camera and camera back does not work (all black), I reset my iphone from the PC and the phone, but does not please you see in the picture. Help.

  

  Hello

  It may help to follow the steps detailed here, including forcing the camera nearby application:

  • Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• IPhone 5 s screen turned black after jettisoning

  I dropped my Iphone 5s in the Park. The screen worked fine after release for 2-3 seconds and that I moved to the bench, it turned black on the first move. The touchscreen works perfectly fine because I can pick up calls. Is my broken screen?

  Hello

  It may help to follow the steps detailed here:

  • If your iPhone, iPad or iPod touch won't turn on - Apple Support

  However, as your iPhone has been abandoned and seems to have suffered damage, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar to organize your iPhone to inspect and, if the service is recommended by Apple, to determine your available service options, deadlines and costs.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/au/retail/Geniusbar/

  Repair service for iPhone price information are available here:

  • price of Service - Support Apple iPhone

• Black screen problem.

  Hello!

  While I was watching a movie from Itunes on my iphone and took a screenshot. As I looked in my album, I ended up getting a black screen. There is a desire for this?

  

  I guess this is supposed to work this way because you don't own the rights to the film.

• Black/White screensaver on Apple TV?

  When I'm listening to music, I have a video 62 "diagonal of a waterfall in the background - NO MATTER HOW BEAUTIFUL is. Is there a way to make the default value for the screen saver to a black or white screen? This seems obvious.

  Thank you.

  J.

  N °

• Is removed from the Iran of Apple Black country list now?

  A warm hello to the fantastic users dear Apple team and it's < 3

  I just have a question today.

  iran is removed from Black list countries apple now?

  Can I use Apple products (like: Apple Store, Apple ID, Customer Care, Online shopping, Making Music Apple and ETC.) in the future?

  Thank you very much

  There still isn't a store iTunes in Iran, so you will not be able to have an iTunes account and download iTunes content - and as we stock are here, we won't know if/when it could be until the if/when Apple announce something.

  He is not an Apple in Iran online store, so you can not buy Apple - none of the Apple online stores the ship outside their own countries.

• iPhone 7 black façade. Additional sensor?

  I was watching my new iPhone with the black front 7 and noticed an additional sensor to the right of the photoelectric cell. But I can't see it on iPhone before white 7 of my wife at all.

  The black front there additional proximity or the light sensor?

  The sensors are the same regardless of color.

  http://help.Apple.com/iPhone/10/#/iphe3fa5df43

• iTunes blue stars side vs Black Stars Rating

  Since the update for Sierra, I notice that MOST of my song rating stars is blue and a few are black. No idea what's different?

  Blue: you noted, black or dark gray is because you have not noted

• Sleep at random after black background

  If I restart the system, everything is fine... I get the silver on my Apple TV 4gen background. However, after that the system goes to sleep and then I wake up the background becomes black and although I can see my apps installed I can't go to the app list/dock and see one of them (for example: a double click on the TV button on the remote control). Again, if I restart the system it will well again (see screenshots). No idea why this is happening?

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Reset Apple TV (settings > system > reset > reset all settings)
  5. Restore the Apple TV (settings > system > reset > restore)