I have windows 7 ultimate 64 bit & when I try to run Starry Night Pro 6.3.6 I get message 'an occred problem' and windows closes the program__

Similar Questions

• "Error: 3" message when I try to run Flash CS4 Pro

  I have Adobe Flash CS4 Pro installed on my Windows 8 operating system, and it worked very well for a while, but all of a sudden now, I get a generic error message when I try to run the application. It is for me a "error: 3 ' State and tells me to restart (which I've done several times) and otherwise to contact Adobe technical support, which will not help me because it is not a"current version ". I also tried to "Run as administrator."

  Very frustrated.

  Fortunately, I got the original installation disc, so I put that in, hope for the uninstall options. To my surprise, it is only available to install. I open the flash cs4 directory and as far as I could tell, all files were there. In any case, I decided to let it install again, and for some reason, that seemed to fix it. The odd part is never I uninstalled it and I used it several times! So I do not know why it was not recognizing the files more.

• When you try to run my auto maintenance, receive SYSTEM_SERVICE_EXCEPTION (US40fs64.sys) error message.

  Original title: SYSTEM_SERVICE_EXCEPTION (US40fs64.sys) error in my PC WINDOWS8

  I have windows8, 4 GB RAM, 500GB hdd laptop g6 pavilion
  I got this error when I try to run my MAINTANANCE AUTOMATIC
  Is that someone has solved,...?

  Original title: SYSTEM_SERVICE_EXCEPTION (US40fs64.sys)

  Hey Malay Mehta,

  The driver seems to be the origin of the problem is the US40fs64.sys.

  Here is some information on the US40fs64.sys:

  http://SystemExplorer.NET/file-database/file/us40fs64-sys

  Try to uninstall the Everstrike software, which can be of Universal Shield and see if the error is resolved.

  Later you can try to reinstall the software Everstrike using the latest version.

• Cannot start applications. I have "set up side by side" when I try to run any application.

  I'm helping a friend fix his computer. He reports that, after restarting a auto update, if it tries to launch any application, it gets this error:

  "The application failed to start because it side-by-side configuration is incorrect." Check the log of events applications for more details"

  I checked. Attempting to run desktop applications will generate this error. However, I can launch the Control Panel, Windows Explorer (not Internet Explorer) and another at the level of the system features (the command line).

  It seems that the C++ Redistributable packages have been damaged on his machine, so I downloaded the file vcredist_x86.exe Redistributable 2005 and 2008. Unfortunately, I can not run these files on his machine. You try to run generates them the same error generated by other applications.

  I also tried to run the repair of a Vista feature install disk but that also causes the same error.

  Can anyone suggest what to do here? I include below the exact text of the event log.

  The activation context creation failed for 'Context by default in the system'. Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c... - controls.resources_6595b64144ccf1df_5.82.6001.18000_en - us_9e72cfd97d4d7bf2.manifest" at line 0. Invalid Xml syntax.

  I looked at this file. It's an XML that is formatted incorrectly. But I don't know how to fix it, or how to get a new copy of it. Any advice would be really appreciated.

  The activation context creation failed for 'Context by default in the system'. Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c... - controls.resources_6595b64144ccf1df_5.82.6001.18000_en - us_9e72cfd97d4d7bf2.manifest" at line 0. Invalid Xml syntax.

  I looked at this file. It's an XML that is formatted incorrectly. But I don't know how to fix it, or how to get a new copy of it. Any advice would be really appreciated.

  Go to the command (cmd.exe) prompt with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken files? If this is not the case, replace the manifesto by the file of your DVD [3].

  Best regards
  André

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token [1]
  [2] http://support.microsoft.com/kb/929833
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/ [3]
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

  Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

  Hi Excompost,

  Follow the steps outlined in the document below. Let me know what you find?

  Installer Serscan.sys file not found when installing network

• onoutlook espress - when I try to open an e-mail with an attachment I get message-don't has no file associated to create an association with him in the control panel - I have tried everything that I know help thanks

  I tried to create a new file and it does not work!  any help would be appeciated.

  Hello Jo Hauncher,.

  Welcome to the forum!

  What is the attachment in the email that you are unable to open? If so, follow the steps below to define which program you want to open an attachment with.

  ·         Click with the right button on the attachment

  ·         Click Open

  ·         Click Save to disk

  ·         Locate the attachment file where you saved in the previous step

  ·         Right-click on the attachment file

  ·         Click Open with

  ·         Select the program you want to run the program

  Reference:

  http://support.Microsoft.com/kb/218367/

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• What happens if I get an error code when I try to run Dreamweaver or Flash Pro?

  I get an error code when I try to run Dreamweaver or Flash Professional. Any idea? Error code: (0xc000007b)

  Please check if the following solution works:

  Error: "unable to start correctly (0Xc000007b)."

  https://forums.Adobe.com/thread/1099431

  Concerning

  Stéphane

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version

  Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
  I know I am running vista 64-bit, it states that in the system properties

  I have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
  32 bit one, I looked in the system properties and it is running vista 64-bit
  Other than a clean install what can I do to improve?
  and if I do a clean install which are the files I need backup so I don't lose my data?

  Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Also make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Windows 7 Home Premium 64 Bit and my DirectX diagnostic tool says that my current version is DirectX 11, but when I try to run space engineers, it tells me that I need to run DirectX 11

  * Original title: DirectX and space engineers

  Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.

  Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.

  Looks like no shore leave for you then... :)

  "NOTE: the minimum requirements are enough to run the game, but without the global functions,

  which requires DirectX 11. »

  "When I go into my file DirectX it tells me that I'm running DirectX 9.0"

  Direct X folder?

  Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).

  It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.

  EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).

  ----------------------

  -Here is a list of the .dll Direct X files you when files are updated.
  There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dll

  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  -They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
  . & Finally d3dx11 - 42 43 >.
  It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.

  If all of these files is missing update Direct X using the DX Web Installer.

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case

  DX must be reinstalled using the full DirectX redist (June 2010) -

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'. How can I fix it? I have Windows XP

  When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'.  How can I fix it?  I have Windows XP

  Thanks for the help.  Discovered that my security on the tools setting was set to medium-high heat.  Passed to way according to the instructions of the active-x and now able to access Windows updates.

• I have just updated to Windows 7 and when I try to run a backup they fail.

  I have just updated to Windows 7 and when I try to run a backup they fail.  It seems that whenever a program tries to update the external HARD disk where backups reside it requires administrator permissions.

  Looking at the options Microsoft suggest that their user account control system is not supported by my version of SyncToy. What can I do? I'm looged administrator

  As you have installed SyncToy until you have created the required permissions, uninstall SyncToy, reboot, then reinstall SyncToy.