I hear you I'm trying windows b 8

Similar Questions

• After you have installed Windows XP pro, I can't hear all the sounds of Windows

  Original title: I got a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

  I had a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

  Hello

  Thanks for posting the question on Microsoft community forums. According to the description, you can not hear the sound after installing Windows XP. He would be grateful if you could answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2 have you installed the audio drivers for the computer?

  3 have you checked the State of the audio device in Device Manager?

  See the steps to check the State of the audio device in Device Manager.

  a. click Start, point to settingsand then click Control Panel.

  b. in Control Panel, double-click System.

  c. click the Device Manager tab.

  d. double-click on a device type, double-click audio for devices of this category.

  e. double-click on a device to view its properties. In the device status box, click the driver tab and click Update driver.

  Follow the given steps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  I suggest to check the hardware, run the troubleshooter and try to update the drivers. You can follow the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• NTLDR is missing - when you try to install Windows 7 on another hard drive

  I have a PC Compaq Presario SR2027X a/w Win XP Media Center Edition SP3 installed.  I downloaded and installed the Microsoft Windows 7 Upgrade Advisor to determine if WIN 7 would go on my system.  The airport of Win 7 Upgrade Advisor said that I could install Win 7.  I bought Win 7 32 bit and 2-1 GB PC5300 memory sticks.  I first installed the memory and booted up the system.  Everything worked well.  BIOS has seen the new memory and I have not encountered any error.

  I then turning the system off and removed the HDD (120 GB Sata).  I installed another hard drive (160 GB Sata) which had been restructured and ready to use.  The BIOS detects the hard drive and the BIOS has been changed for a start of the OPTICAL drive.  I then placed the WIN 7 32-bit software disk in the OPTICAL drive and saved the changes in BIOS and rebooted the system.  I was expecting to see the normal WIN 7 screens during the installation.  Instead, I got "NTLDR is missing, press CTRL + ALT + DEL to restart".

  Then I tried pressing ESC during boot to enter the boot menu.  Once in the boot menu, I select the optical drive and now I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND press ENTER".  I opened and close the optical drive optical drive light lights up, and I then press on enter.  I get the same message on "DISK BOOT FAILURE,...» ».

  I built more than 40 PC and have never had this problem.  Is there something unique about Compaq/HP PC's that prevents me to install WIN 7 on another hard drive that is not the original hard drive came with this pc?

  HP / Compaq computers are no different from any other computer on the market. You can install Windows XP, Vista, 7 or 8 on almost all made within the last 7 years.

  I think that your problem is due to a failure of CD/DVD drive or disk installation of Windows 7 corrupt or unbootable. Please check that the CD/DVD drive is fully functional and functional as should be. Also, check that your Windows 7 disc is free of errors and that it is bootable. If necessary, you can download a Windows 7 SP1 ISO from HERE and HERE and also download Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Product ID invalid when you try to install Windows XP on VMware.

  XP installation of VMware

  Hello

  I have a PC under win 7. and I am trying to Flash an old router to wireless access point for a spot of dead in my house. To cut a long story short, I need to Flash the router using a software program that does that on XP (I tried the compatibility options in Windows 7 and it does not work). Then I put on the implementation of a virtual machine using VMware and an old copy of XP, I had. However, when I try and install XP I get the error that the product id is not valid. Now, I know that the software is legitimate - it was part of a XP operating system provided with an HP laptop - so my question is how I can get through the installation? I will not buy another XP code - after all I will ever use again once I finished the flash - and for the same price, I could buy a new router!. I just want to save the Earth, a small piece of discharge potential and save myself $20!
  Any help appreciated
  M
   

  Hi MarkPinches,

  Follow the steps in the article.

  You receive an error message after you enter the product key when you try to install Windows XP

  http://support.Microsoft.com/kb/310637

  If the problem persists, contact VMware support for more help and information.

  http://www.VMware.com/support/

  For reference:

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• Encounter problems when you try to install Windows XP Service Pack 3.

  original title: Professional window xp

  Redirect the project!

  Sorry! We to inconvenient, interruption of power supply to the island due to bad weather and low atmospheric pressure in the Mariana Islands. and relative to the first page I wrote I hope he gets becaused in the future, I can't guarantee if there is another set of black out

  in the island again and I hope not! becaused I have extra power for my machine, so I'm going to the principal of my question! can I know

  1. I already check the version of the Professional Windows xp system under the computer system only service pack 3 edition

  is written and nothing like 32 or 64-bit version.

  2 - I have a few download but it comes up to the attempt failed becaused of the 32-bit and 64-bit, I can't determine.

  3. is the service pack 3 is the 64 bit version? 'or' version 32 bit!

  Last week! I also tried to download a microsoft software support center of spywares, virus, malware, Trojan horses to prevent

  the downturn and falls down the computer and still fails, I don't know if the cause is becaused of the smart display or because of the security alert! becaused it says "configuration is a bad installation needs to reinstall the configuration" what does that mean? the version of 32-bit and 64-bit

  always have failled download connection? What is the right option for this? Recently, I already have microsoft security essential and it can

  protect the computer against all viruses! My question is that the microsoft security essential can fix regestry types of problems? or scan only to deter-

  my mistakes! Is that the security system can help if we make upgrades in the order compatibllity of the system?

  Thanks again for understand my question!

  Hi allanmiones,

  ·         It shows Windows XP Service Pack 3 under System Properties?

  ·         What you are trying to download?

  ·         What is the exact message that you receive when you download something?

  There is no SP3 for the 64 bit version of Windows XP, so if you have installed Service Pack 3, it means that you have a 32-bit version of Windows XP is installed on the computer.

  Overview of Windows XP Service Pack 3

  You can check the Windows XP system information (Msinfo32.exe) tool to see if you have a 32-bit or a 64-bit operating system. Search for System Type. Note that x 86 is 32-bit and x 64 is 64-bit.

  For Microsoft Security Essentials, see:

  Microsoft Security Essentials

  You can also ask your question in the Microsoft Security Essentials Forums .

• Errors in the world when you try to reinstall Windows XP on a new hard drive.

  Original title: errors everywhere!

  Hi all:

  I recently bought a new hard drive (seagate momentus xt) for my older PC toshiba M70 laptop. I tried to re - install Win XP on the recovery disk (which came with the laptop) but I got a black screen with cursor. I repeated the collection, same thing. To check that all was well with the disc, I scanned and then installed ubuntu 9.04 it work perfect! What is interesting is that in the prior installation, he showed that win xp has been installed on the disk. Then I tried to re - install win xp - then I got this error Grub 17... I went back with the facilities and now I'm at a point where I get a message "error: unknown filesystem grub rescue >" (after the installation of ubuntu 11.04, then windows again). I don't know what to do. What I want is my xp back, I can't get ubuntu. Help, please.
  Thanks in advance.

  Hi ARolle,

  ·         It is reinstall drive?

  Method 1: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Try to boot from the CD and see if you can start the installation.

  Contact Toshiba to get more information on the type of disc you use to reinstall Windows.

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time.

  After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time. I tried to activate using automated phone system, but could not do. What is the solution. I know that this product key I used only on my current desktop & in past I had not faced any problem on reappattage. This time, I had deleted all the parks & reformatted all readers of my Win7 teacher reappattage. This can be a cause of failure of activation?

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Error code: 0xC004C003, when you try to activate Windows 7 Ultimate.

  Original title: 0xC004C003

  I changed my motherboard and reformat my hard drive. After reinstallinf windows 7 ultimate, I get this error the establishment it is blocked.

  Automatic reactivation does not work.

  now he tells me that the product id is not valid

  the product key is: [redacted]

  First, edit your post and remove the product key:

  Have you tried to restart by phone:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please be aware of the limits if you are using OEM Windows 7:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 Professional SP1 not recognized when you try to download windows 10

  trying to get the windows 10 application, diagnosis says that my version of windows is not supported. Although I have windows 7 SP1, it return windows 7.1 version... any ideas?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Please go through the links below, this has manually download option as well, make sure that your computer meets the requirements.

  Method 1:

  Frequently asked Questions: Windows 10

  Refer to: How can I know if my computer can run Windows 10?

  Windows 10 questions

  Method 2:

  See suggestions from Andre Da Costa: Get Windows 10 App

  If you can't find the update of Windows 10, I suggest you to download the Windows 10 from the link below and check.

  Download Windows 10 and run set up the workstation.

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing the installation.

  Reference:

  Update installs get Windows 10 app Windows 8.1 and Windows 7 SP1

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• When you try to install windows 7 64 bit, he asked me to remove the disc and start over, but it does not help. Help, please.

  So I have a 32-bit windows system 7 and I'm trying to upgrade to a windows 7 64-bit system.

  I have an installation disc, and my pc should be able to handle 64-bit.

  However, when I insert the disc (yes my drive is started first in the BIOS)

  The installation program starts,

  I have chosen the language,

  Accept the terms and choose to upgrade.

  He then gives a compatibility report:

  "the computer has started using the windows installation disc remove the installation disc and restart your computer so that windows starts normally.

  When I restart my pc while the disc nothing happens and when I restart my pc with the drive the process repeats.

  I'm looking for for a long time on the internet and I can't find all the solutions that work for me.

  Please give detailed answers, all help its appreciated.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  After the first reboot, set the BIOS to boot from the hard drive.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• No upgrade option given when you try to upgrade Windows Vista to Windows 7 Home Premium with version complete DVD

  I am trying to upgrade to Windows 7 on my Lenovo x 200 tablet which is currently under Vista 64-bit.  My first attempt was with a version of Windows 7 Home Premium 32-bit which, once started let me choose the upgrade option but then I notified (obviously) that would work to upgrade Vista 64 bit to 32 bit 7.  Since I also have a DVD of Windows 7 Home Premium 64 - bit, I moved forward and put this disk to try to upgrade.  However, when I run the Setup it goes right to the choose what partition I want to put a new installation, do not allow me the upgrade option at all.  Why is this and how do I fix this if I can do an upgrade rather than a new complete installation then I won't lose all my programs and others and end up with a folder of big 'windows.old '?

  Which edition of Windows Vista are you attempt upgrade from?

  If they editions do not match, you will not be able to make a place in the upgrade:

  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate

  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate

  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition

  Windows Vista Business > Windows 7 Enterprise

  Windows Vista Ultimate > Windows 7 Ultimate.

  http://www.notebooks.com/2009/10/07/how-to-upgrade-to-Windows-7/

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos