I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

Similar Questions

• I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  Using the Dell recovery disks to reinstall?

  The origonal drive failed?

  If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• I just installed ISA server 2006 and ISA ISA server client not found what I need to do?

  I just installed ISA server 2006 and ISA ISA server client not found what I need to do?

  Hello

  I suggest you to report the problem in the TechNet Forums to better support on the issue.

  http://social.technet.Microsoft.com/forums/en-us/category/forefront

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (code 19) HELP Please!

  Hello, I did all THE steps mentioned above, and I still can't get it to work. I tried to uninstall the driver and then reinstalled, tried the Mr. Fix it - will work with windows 7, it says. I tried to restart my computer. The message I get is;
  Problem with your CD/DVD-Rom drive
  Cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19)
  I don't know what else to do, can anyone please give me instructions step by step what I need to do please and thank YOU!

  Hello

  1. Have you recently installed the CD/DVD drive?
  2. Are you aware of any changes made to your computer before this problem?

  A Code 19 error is caused by one or several problems with parts of the Windows registry that contains the driver and other information on the specific hardware device.

  Check the status of the device should be the first line of conduct, if you suspect that a particular device that is causing a problem, or if the device in Device Manager is marked with a yellow exclamation point.  It is also possible that the device is not compatible with this version of Windows.

  Below the thread responds to the question. I suggest you follow the instructions in the thread to solve the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/code-19-configuration-information-in-the-registy/80fa904a-7ceb-4533-A8A7-6a91040e283a

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  It will be useful.

• I have creative cloud on old laptop - not sure that I need - want just Acrobat to read, edit and combine files. I want to install the new laptop - how to do basic software?

  I have creative cloud on old acrobat to want just laptop - not sure that I need - to read, edit and combine files. I want to install the new laptop - how to do basic software?

  Hello

  You can check the following link and download Acrobat on your new machine.

  https://creative.Adobe.com/products/Acrobat

  You simply allow the way which you license your CC package.

  Concerning

  Sukrit diallo

• I bought Adobe Lightroom 6 but I don't have a CD drive to install the program. How can I download instead?

  I bought Adobe Lightroom 6 but I don't have a CD drive to install the program. How can I download instead?

  Hi Amanda,.

  Please download Lightroom from the following link:

  Download Photoshop Lightroom

  Kind regards

  Bani

• I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  First of all make sure you disable / disconnect in order to save the number of activations.

  Click the help menu, and then select disable / disconnect .

  Then you can uninstall in Control Panel uninstall process as normal.

  Later, you can download and install CS 6 app link below:

  Download Creative Suite 6 applications

• I bought photoshop CS5 in 2011 and my laptop crashed and I bought a new one and had to re install the program. How can I do that I have my original email with the confirmation number ETC, but it does not appear on my order history?

  I bought photoshop CS5 in 2011 and my laptop crashed and I bought a new one and had to re install the program. How can I do that I have my original email with the confirmation number ETC, but it does not appear on my order history?

  Download from products of CS5 download

  Install and enter your serial number.

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• HL-DT-ST DVDRAM GT80N "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I ran provided patches I've uninstalled and restarted. Attempted to update the drivers. I can not get my DVD/ROM to work I have a Toshiba Satellite S855 S5381

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  HL-DT-ST DVDRAM GT80N

  I have windows 8

  How can I erase my registry and start all over again? What exactly I'm looking for?  I found a post for the same problem on a different model, but I can not located what was discussed.   My computer has been used since the beginning of February.  I need to install programs and others.

  I have fished all day found this and it fixed it!

  http://support.Microsoft.com/mats/hardware_device_problems

  Thank you for your help :)