I installed LR6 on Windows 7. Everything works well, but it is there no chance to get help about menu or F1

Similar Questions

• Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works well, BUT it's an old computer, and I think he could pack up unexpe

  Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works fine BUT it's an old computer and I think he could pack up unexpectedly. These things are happening. I want to sign up for the plan of photography but I also a Windows Vista laptop, and it's old too so I can put apps on a new office and a new laptop computer, after you have already installed on my desktop. That is why three activations. Am I allowed to do? See you soon. Paul

  You can't have three activations. It is simply not possible technically. If and when the time comes, just disable you / disconnect is on one of the old systems and install it on the new. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and resist it.

  Mylenium

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• I have connected my laptop HMDI cable to my TV HMDI and everything worked well. Now my TV says there is no signal from the computer. Any advice?

  My cable is only a month and do not have any problem in a first time... do not find this one.

  Hello

  You did changes to the computer before this problem?

  Step 1: Again to check the connections and verify.

  Step 2: Update the video card driver.

  Step 3: Check that the TV has the correct input selected. Check the manual that came with the TV.

  Step 4: Perform the System Restore, restore to a date when everything worked well, on the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/no-signal-on-tv-when-connected-pc-to-it-using-hdmi/2168c897-a7bd-4420-b4c8-2a4b10e90ccf

• In the 8530 Simulator, everything works fine, but not installable in Simulator 8520 or physical devices 8520

  Hey guys,.

  I wrote my application and everything worked very well in the Simulator. Then I got to know that the 8520 does not support GPS and I developed all the time to the 8530 because I thought the people here have the 8530, but they are not, but I think that this is not a problem because of the located to get the location of the cell site towers using.

  I checked all my imports if they are compatible with the 4.6.1 OS version and they are.

  http://pastebin.com/3rDjTvgH

  later, I checked if I comment on this two classes I can install the application on the device and also in the Simulator

  If I only comment on one of the two i cannot install

  If I use this code ( http://www.blackberrybase.net/index.php?page=Thread&threadID=4414 [post number 7]) I can install the application... I get a lot of mistakes, but I can install it and it does basically the same as my location class... who told me that the implementation of a location in the 8520 cannot not be the problem

  Why can not install the application on the Simulator, nor in a physical device when I implement this two classes (only in the 8520 with the 8530 everything worked well)

  I searched a lot to find the log files or something that tells me a bit whats wrong, but I've not found anything

  Thanks for the help! :

  I don't know how to close a topic if its possible, but I found a solution.

  I use JRE 4.6.1 instead of use the JRE 6.0 for the case that everyone will have the same problem in only once.

  Here's how to install an old JRE in eclipse:

  http://us.BlackBerry.com/developers/javaappdev/javaupdate.jsp

  welcome them

• I just got a new Macbook Pro when I reinstall my CS4 Master Collection everything works fine, but I can't get Acrobat 9 pro to get the serial key

  I just got a new Macbook Pro when I reinstall my CS4 Master Collection everything works fine, but I can't get Acrobat 9 pro to get the serial key

  OK, it worked. Someone suggested dismantling drives all connected. In fact, no luck. But while all the disks were taken out and closed all applications I uninstalled Acrobat Pro using the application in the folder Acrobat Pro. Then I went back to the installer and have already told him only to install Acrobat Pro. Once done everything first, I opened Acrobat Pro. He asked to install some extras and I said no a few times. It opened and worked on a test pdf. With her still open I tried to open Acrobat Distiller. He did not ask a serial number, but I wanted to just install an extra. I said no again and it finished opening. Wanted to be my default PDF application but an extract which is better so I said, person not the last time. He has worked to create a perfect pdf of an Illustrator EPS. Hope this works for you also.

• I just bought Photoshop CC, everything worked fine, but when I try to open it, it says "no found subscription, please contact customer support.

  I just bought Photoshop CC, everything worked fine, but when I try to open it, it says "no found subscription, please contact customer support.
  I tried to connect you again, it still works well, but when I try to open it, the message of stills the same.
  What should I do?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  Hi Samuel,.

  To solve the problem with the application you have installed, you can run the troubleshooter for Windows app.

  Let us know if you need more.

• Have the CC on my mac - everything worked well, until now...

  Everything worked well, and now, none of the apps are clickable, so I can't open an any of them - nothing has changed since I last used apps.   What should I do?

  Thank you!

  Hi jacqelle214,

  Could you please follow this step and let me know if it helps.

  Rename the folder OOBE OOBE.old from this location

  Path: / library/application support/Adobe/OOBE

  Rename the folder PCD PCD.old from this location

  Path: library / application support/Adobe/PCD

  Now restart creative cloud.

  Incase it does not solve the problem, please contact the Support from Adobe http://adobe.ly/yxj0t6

  Kind regards

  Baudier

• TC and AE cable network works well, but some settings seem odd

  I was stumped by this for some time.  Despite the fact that everything works well, a setting on my TC seems inconsistent with what would be expected.  Here is a summary of my network:

  1 modem of the IAF was WIFI and DHCP active off the COAST, and it connects to the TC with ethernet.  The IP address is 192.168.1.1.

  2 TC reportedly made all DHCP and NAT functions and peripheral PSI is simply a relay for the incoming connection to broadband.  IP address is 192.168.1.2, ethernet and it is connected using static.

  3 AE network extends the network.  IP address is 192.168.1.3, ethernet, connected using static.

  4 Apple TV 4 does its thing.  192.168.1.4, ethernet static IP address.

  5. I have DHCP reservations for Beach 192.168.1.2 - 192.168.1.10 for these devices, as well as the rest - iMac and MacBook Pro, ethernet, static.

  6 DHCP set temperature 192.168.1.11 to 192.168.1.200 for mobile devices.

  The TC acts as the hub for all the rest and that is why he would hold DHCP and NAT functions, these are disabled on device of the ISP.  However, for my life, I can't not DHCP and NAT to work as router Mode.  DHCP is the only one that works.  I certainly do not have an IP given by the ISP, and there is nothing to indicate that it performs NAT functions.  If I try to change the DHCPand NAT router Mode, I get errors that there is a conflict and that the range is incorrect.  Conflicts of DHCP-range for the base station WAN address.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  Any suggestions are appreciated.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  NAT is handled by the device of the ISP that you call the 'modem'... but this is very probably a device modem/router or gateway... that despite what you think, does not as a simple modem.

  If it were, it must provide a public IP address of the time Capsule and instead provides a private IP address (192.168.1.2) of the time Capsule.

  A public IP address cannot start with 192.x, 172.x or 10.x

  When you have your modem/router configured properly as a simple modem... then... you will be able to configure the time Capsule as the main router to your network using the DHCP and NAT correct setting, without seeing errors like Double NAT or incompatible IP address range.

  Some modems/routers and gateways can be configured to operate as a simple modem, and some may not. If your modem/router provided by your ISP, you may need to check with them to see if the device can be configured to operate as a mode modem simple bridge, providing a public IP address unique to the time Capsule.

  Moreover, when the Capsule is configured as a router, the default IP address range that he uses is 10.0.1.x.  The Capsule will be 10.0.1.1 on the LAN and devices will be at 10.0.1.x.

• I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  This error message you see?

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not Lightroom app.

  I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not the App mobile Lightroom Dave

  Hello

  There is no feature that can do this in Lightroom Mobile from now.

  You can post your comments/idea here Photoshop community customer family

  Thank you