just installed wireless com-cast, printer works well, but now I can not fax.

Similar Questions

• ImageClass MF4350d. printer works well, but the scanner does not work.

  Canon Toolbox4.9 cannot connect it. Each time, I followed the instructions and put back driver and Toolbox (in the process, I have to restart my computer twice), it works for a while. But when I restart my computer once more, no link once again, and I need to uninstall and install all driver and toolbox4.9 again to make it work temperarily.

  I use windows 10.

  Thank you

  This simple fix I found online worked for me:

  Start > in the Run dialog box type. Services.msc

  Scroll down to Windows Image Acquisition (WIA)

  Right click, select Properties

  Verify that the startup type is set to automatic

  Click the journal tab of

  Make sure that Local System account and allow service to interact with desktop is activated. Hit apply.

  Click on recovery... Click on the window next to the first failure, scroll to restart the Service. Hit apply.

  As a MF Toolbox work and stay working even after a reboot. Only problem is Windows Fax Scan no longer works, but I can't use MF Toolbox.

  I hope that helps!

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• Ive been having problems with my Lightroom 6 (desktop only version - version installation CD), so I uninstalled. But now I can not re - install. Help, please.

  Ive been having problems with my Lightroom 6 (desktop only version - version installation CD), so I uninstalled. But now I can not re - install. Help, please.

  It seems that you try to install the version of Windows on your Mac, that will not work.

  I haven't used a DVD for installation of Age, but I would have thought that the Mac version would also be on the disk.

  I'm not a Mac person, but I think that the executable file would have the .dmg extension.

  Or you can download the latest version - 6.4 Lightroom - from here: keeping up-to-date for Lightroom

  I hope it works better the other link you tried.

• I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

  I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

  Have you installed the special version?  You must...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems."

  Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems." I hit the repair button continue and I get a message that Adobe is unable to solve the problem, I have to do it manually. I followed the steps to allow permissions for preferences and Adobe and Caches and always LR launch. Help!

  Hi Mariej,

  If please check the following link and let me know if it helps: Lightroom has encountered problems of the user's permissions. Bridge of Photoshop Lightroom crashes or hangs at the launch

  Kind regards

  Tanuj

• I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  In the library, go to the folders Panel, right-click on each folder of upper level and "updated to the folder location".

• Printer tests very well and worked before; but now I can't seem to print

  Original title: problem with the wireless printer.

  I have a HP photo printer c309 all-in-one. When I run the printer tests in order to check if it is wireless, it passes all the tests. On my computer, the printer icon said he's ready. It has worked before. Now it does not work. Did not work for some time. I tried everything I know. If I plug in, it works. It not scan from windows and scan fax either and he used also. I don't know if something has changed regarding the settings on my computer or what. Very frustrating. I use verizon for my internet connection. Can you please help?

  Hello

  1. who is the operating system installed on your computer?

  2 have you made changes on the computer before this problem?

  3. you receive error messages when you try to print?

  4. What are the troubleshooting that you tried?

  I suggest you to follow the methods mentioned below and check.

  Method 1: Temporarily disable the security software and then try to print.
  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   Method 2: Follow the steps in the article.

   Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3: Try to update the printer drivers and check if that helps.

  Check out the link for additional assistance mentioned in the update drivers below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you

• OfficeJet pro 8600: printer works fine, but the software is not

  Printer works fine.

  However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

  In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

  

  Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

  Connection to the wireless printer.

  All these functions work fine if I call them from the physical control on the front of the printer Panel.

  I don't know if these are two separate issues, or the two aspects of the same problem.

  Any thoughts?

  Thank you.

  Hello

  Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

  http://support.HP.com/us-en/document/c03640384

  You can see any difference?

• My hp photosmart 7660 printer worked last week - now it does not work

  It worked fantastic last week - I went to use and it won't work at all. I can the light physically but I don't always feel just hit in the 'file' and it begins to print. I have no idea why it will not work now. Dows anyone at - it all suyggestions. Sure would appreciate it.

  Thank you

  Vicki

  It will do a test print? (right click on the printer installed for this option). Also it give it a try.
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• HP ENVY 7640: my new printer HP ENVY 7640 worked well. Now, I can't get a wireless connection.

  NN

  Hello

  Kindly click on the following link to fix the problem.

  http://support.HP.com/us-en/product/HP-envy-7640-e-all-in-one-printer-series/6617267/document/c04618676/

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes

• I installed it on a new computer and my password would not work to connect, now I can not connect on any of my devices and reset email does not get sent?

  I have a new computer. I installed the beta version. I run beta 2 other computers a Tablet and my phone. He taught me that I needed to separate other devices and try again. My credentials will not work and a reset email hasn't shipped yet. I would get my devices connected and connected again. If this is not possible I reluctantly will go back to explore. Mozilla has been so easy to use so far? Very frustrating.

  Hi bizebill,
  Thank you for your question. I understand that you want to synchronize all your devices. Please make sure that all the devices are updated at least at version 29.
  If you were on a version before that, you need to set up a new email and the password with the new synchronization.

  I hope this helps.

• I put "Tiles" for my new tabs. He used to come to my new pages as well, but now it is not. How can I be my new default page of the tiles?

  I don't see any instructions for the manufacture of tiles my default NEW PAGE. I see a lot of information on the creation of my failure to the NEW TAB PAGE. How to do it for my default NEW PAGE too?

  'Address' of the new tab page is on: newtab where you must type or paste in the Preferences dialog box (Start, homepage, tabs and download settings).

• I have Sony tablet and also have a Sony laptop. My laptop connect well but my tablet can not connect?

  Let me know how can I connect my tablet to my router, I have already download the latest version of android, but still problems with my Tablet wi - fi

  Hello BrendaLiza,

  Welcome to the community of Sony.

  Try using the procedure described at the following link:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/35139/c/65%2C66/kW/35139

  If the problem persists, contact your Sony phone team.

  http://tablet.sel.Sony.com/1/1/SGPT111USS/ContactSupport