I just had to activate my Windows Vista via the phone. Can I do it again the next time I have reformat my computer?

Similar Questions

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I cannot activate my windows Vista, says the product key already in use

  I reinstall my windows vista, when I try to turn it on, pop up and says... you type the product key is already used... I don't remember copy my drive to vista... or install another computer... what I'll do... ?

  Activate Vista by phone:
  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  NOTE:
  If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Need help to activate my windows vista.

  OK, so I tried to activate my windows vista by using the product key that comes with the cd.

  And here's what appears...
  "The Software Licensing Service determined that this specified productkey usable only for the upgrade, not for new installations."
  I had to do a clean install not an upgrade because I had windows xp Media Center. Now he tells me that the product key is only for the upgrade not for any new installation? Help, please!
  I get my windows activated by toll-free phone because I don't spend any money on another product key?

  Hi Jcontillo,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you are facing a problem during the activation of Windows Vista.

  I suggest you to see the steps in the following Microsoft article.

  Error message when you try to activate a copy of Windows Vista by using the upgrade product key: "the following error occurred while trying to use the product key: Code: 0xC004F061": http://support.microsoft.com/kb/930373/

  Hope the information is useful.

  If you have any questions on windows, feel free to post your questions and we will be happy to help you.

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.

  Disaster of Windows Mail.  Where are my emails please?

  How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.  The computer has stopped working so I removed the hard drive, put it in a case and now use it as an external drive.  My new computer, I took possession of the Documents and Settings folder, and I'm looking for emails.  I followed the path, Documents and Settings / / AppData / Local / Microsoft / Windows Mail but there are 2 folders, backup & stationery as well as a few small files.  Where I could hide my email? Please, I beg you.

  There should be a directory called local folders under the message store and eml files organized into folders named after the directories under this directory are.  They may be hidden files, so make sure that you have enabled the display of hidden files and folders under control panel | Folder options | View.  You can also try to search *.eml, because messages are stored as eml files.  See www.oehelp.com/backup.aspx#wm for background.

  Steve

• I'm trying to activate my window Vista Home Basic but fails.

  Sir, I try to activate my window Vista Home Basic but fails. in front of many, I managed to activate, but now after re installing my window I do not activate online.

  Sir, I try to activate my window Vista Home Basic but fails. in front of many, I managed to activate, but now after re installing my window I do not activate online.

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking

  Activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• error code 0 x 080080017 I just point-to-point dead windows vista buss... Since ive been doing this also 663

  Well, I solved this problem. But I have another. Thanks, I get a pop up screen to windows update, so I do and I get an error code 0 x 080080017 I just point-to-point dead windows vista buss... Since ive been doing this also 663

  Hello

  I suggest you perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Code product key? had reboot my computer and I need a code for Windows Vista from the bottom of my laptop

  Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.

  Can you help me?

  Thank you very much

  The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes.  If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.

  If you can't find the product key, your only choice is to contact the manufacturer and see if they can help.  Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs).  A valid product key is required for activation if activation is required - there is no way around this problem.  And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).

  I hope this helps and that the manufacturer can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.