I just replaced the hard drive in my PC with my arrival of the damaged disc. I'm wondering now "activate Windows now".

Similar Questions

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• CPU constantly tries to reboot - just replaced the power supply - and can't get into Windows at all the

  I replaced the power supply 2 weeks ago and left the computer.  Follow me up one morning, the computer froze and when I tried to reboot, it whirs and stops... 5 seconds later same thing.  The power button lights up orange... someone can give me an idea of the problem?  Defective power supply replacement?

  Hi Cathy,.

  This seems to be a hardware failure. You must get in touch with the manufacturer of the system or the local Techshop for better assistance.

• After replacing a hard drive

  I just replaced a hard drive on my pavilllion p6210f.  I need to know what to do next.  All I have is a 7 (64-bit) windows repair disc I made when I got the computer.  It did not come with any CD. What should I do next?

  You did just the repair disk or the recovery partion disk? The recovery partion disk should have 3 or 4 discs. Is where the installation discs are now, they are made from the recovery partition, saving money to have the discs are provided with all computers.  If this isn't the case, the only thing to do is go to drivers and support for your model page and hope they have the factory drives listed. You pay shipping.

• Replaced my hard drive and my product key is missing

  I just replaced my hard drive on my computer and went through the installation process. I have a legitimate version of windows that was recorded before. This is the same computer, but I can't find my product key for Finnish installation. I tried to call, but the given number cannot be reached in my region... apparently. Is there some way that since then I taped the product key can be recovered? I really need this for school so the sooner the better.

  I was searching the Internet and ran across this site: http://windowskeymarket.com they do not always have the key I was looking for this is why I missed it before, it really depends on if they are in the stem. This time they did it. Thanks for the help!

• I replaced my hard drive, I need to reactivate my PS CS3 and LR 3

  I just replaced my hard drive and now I need to reactivate my PS CS3 and LR 3

  You must contact Adobe to reset your license.

  Contact the customer service

• Replace the hard drive of 500 GB with 256GB SSD in spectrum XT Touchsmart

  I tried to replace the HARD drive of 500 GB with 256 GB Samsung SSD and then began to install it using the external DVD drive, but during installation without disk hard were found. What I have to disable certain BIOS settings or I need to install the SSD in a separate location. Any kind of help is greatly appreciated.

  Yupp, I could install an SSD. You need to install the drivers for RAID Intel® Rapid Storage Technology (Intel® RST) driver (https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+ (Intel % C2% AE + RST) & lang = fre) during the installation of Windows 8. I extracted the drivers for USB and everything by choosing which device to install windows 8 installed drivers.

  After that, the SSD has been detected and the simple installation procedure. I pasted the link for the driver, don't know whether or not it will get removed. In case it is removed just search driver RAID Intel® Rapid Storage Technology (Intel® RST).

• Replace a HARD drive in RAID 1 PowerEdge 2950, question on the process

  Having never had to replace a HARD drive in a RAID 1 configuration on a PowerEdge 2950 Server (PERC 5 / i).

  Can I do put in custody or from a cold start?

  I replaced the HDD failure with the new HARD drive with the same part number.

  This is my boot volume, so I don't want to spoil...

  THX

  If the data is critical, and you don't have a backup, get one now.

  NEVER stop a server to introduce a disk. If the reader poster pred fail, force the drive offline first, then remove it. If it is already broken, then just pull it off.

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• Replace a hard drive in dv6 but is not completed the installation phase

  I replaced my hard drive with a disks recommended by an expert from HP in this forum, and he seemed fine. After starting with my #1 recovery and loading of each disk when you are prompted, I got the final guest/message: "preparation of the recovery is complete. Remove the system recovery media. Once the computer is restarted, the installation of recovery process will begin... Support on continue restart the computer. "When I hit the"Continue"button, the screen went black as if it has been restarted. But instead, a black screen with the HP logo in the centre appeared, with the text: "Press ESC for Boot Menu" in white letters in the lower left corner. Waited about half an hour, and then you press the ESC key, but it changed nothing. Same screen HP. And that's all - nothing else has happened. I left it on all night, thinking perhaps that it takes time to get there, but in the morning, the same screen was there and my phone was hot as if in use. So I turned it off right there. What would not, and that I should try now?

  Turns out that I don't need to download the Microsoft Windows software and then struggle to find the right drivers, thank God. My recovery discs works perfectly after all.

  Having read tons and tons of forum posts about this problem, I finally found a solution that worked really - posted by another user, GoodTimes81 (thanks!). This solution is pasted below (with numbers and an additional note added by me):

  (1) put the recovery disk #1 in and

  (2) when the Recovery Manager screen loads, you will get a few options, but the one you want is the command prompt (which appears after you select "Run a computer check.")

  (3) in the command prompt, I typed bootrec.exe/fixmbr, you press on enter and waited it says the operation completed successfully.

  (4) I typed bootrec/fixboot and then you press on enter and again waited until he said the operation has completed successfully.

  (5) after having done that I left the command line, restarted my computer and waited until my recovery disk #1 loaded up again.

  (6) then, I chose the recovery system to the Recovery Manager screen and went through the process of insertion of disks 1 to 4.  When the 4th disc is complete, it says remove the recovery disc and press on continue, which I did, then it restarts, except that this time it restarted and actually started the installation and facilities it is supposed to do and has completed the recovery process.
  _________

  The other user said these steps solved the problem for her, and they could work for you. Finally, they worked for me, except after step 5, the recovery disk #1 would not load again. I received an error message (the black screen, white letters) mentioning a problem of location startup (sorry, that I did not write down exactly what he says). I pressed the button power to restart, but got the same error message.

  So I pressed the button to power again but this time, you press F11 repeatedly until I had a menu of options. The option to boot was F9, then I pressed F9 and selected "CD/DVD player" (which I had already done elsewhere earlier in the process, but maybe it had reset after entering the command request?) and then restarted again.

  This time, it worked, and I was back in step 6 above. Load the discs one at a time (note: I have 7 discs instead of the 4 mentioned by another user), and after that the disc was done and I got the prompt to "Press continued to restart", it restarted and he proceeded to load all the software, drivers, etc as it is supposed to. Yay!

• I replaced my hard drive. How can I get Windows XP loaded on my computer? I've already paid the fee.

  I replaced my hard drive.  How can I get Windows XP loaded on my computer?  I've already paid the fee

  Hello rsmith3042000

  What kind of system do you have?

  Do you have an XP installation CD?

  Here are installation tutorials

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  http://www.michaelstevenstech.com/cleanxpinstall.html

  If you had only a recovery partition, it's lost now so you might contact the manufacturer and ask for the CD recovery.

  .

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• I need to replace my hard drive on my laptop. How can I install my apps on the new drive without having to pay another subscription

  As the title of the discussion. I will replace my hard drive on my laptop to improve performance, which means reinstall my Photoshop/Lightroom and Bridge apps. How can I go about it without having to pay another fee to subscriptio?

  Simply install them again.  You are allowed two active installations at the same time.  If you have already used, the installation process will tell you that and whether to disable one of the facilities as soon as possible.  Say Yes.  If you have not installed on a desktop as well, then open Photoshop on this system.  If it has been disabled, tell it to disable a previous installation, as you did with the laptop, and you should be OK from there.