Replace a hard drive in dv6 but is not completed the installation phase

Similar Questions

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• When I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation

  I installed several card games again and had no problems.  But when I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation. I have

  Windows Explorer and uninstalled until I reinstalled it.  I've done 4 times.  He went all way through the process, than to see a message that Setup could not be resumed.  Given that the other two disks of Hoyle have been correctly installed, why do I have problems with the drive of Hoyle puzzle and board? I contacted Hoyle and does everything that they told me to do.  But without success.  What could I do it wrong?

  Hello

  (1) what is the operating system that you use on the computer?
  (2) you get error codes?
  If you use Windows 7, Hoyle Board Games is not compatible with Windows 7.
  You try to install the game in compatibility mode.
  Click on the below link to check the compatibility of the game.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Hoyle%20Board%20Games&v=Encore&UID=&pf=0&PI=9&s=Hoyle%20card%20game&OS=64-bit
   
  You can check the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  You can check with the manufacturer of game for patches to run the game on Windows 7.
  http://support.Encore.com/
  I hope this helps!

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  Hello

  What is a model supported by your version of Windows? You could just plug it in and see if Windows recognizes
  and they get the drivers off of the internet. Although it is recognized that you should always check the manufacturer's website
  new drivers and control software.

  Check with the site of the manufacturer of the camera brand and model you should be able to download the necessary software.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I had to replace my hard drive and now windows does not recognize my product code valid what to do?

  I don't know what else to add, it's an HP computer and I've had it for 3 years. the hard drive has become corrupted and I replaced it and now windows 7 Home premium that I bought from best buy does not recognize as valid product code. What now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• downloaded printer driver not unfolds but do not know the installation

  downloaded printer driver software (laserjet P1006, windows 8) unzip if you double click on it, but don't know the installation. No way to connect the USB is displayed. Simply indicates that it is ready whithout after installing the driver. How to do the installation started?

  Hi Mauritis,

  Thank you very much for your answers.  If you don't have administrative rights, then you will need to get them.  It may be possible to solve the problem with the drivers that are currently listed, but this problem can be caused by the initial install the disc. I would try the steps below to see if that solves the problem.

  Note: administrative rights must be obtained *.

  1. completely uninstall the device from programs and features

  2. make sure that all instances of the deleted software (programs, Device Manager, etc.).

  3. download and save the correct software

  4 reinstall the unit DOWNLOAD

  Hope that helps and have fun on vacation!

• Windows could not complete the installation. to install windows on installation of HP DV6-7007TX, this restart of the 64-bit computer

  I buy a new HP Pavilion DV6-7007TX. I don't want the pre loaded Windows 7 Home Premium 64 bit that's why I decided to format it using Windows 7 Ultimate 64 bit, but after reboot before the Installtion "filling" to finish an Error Message is displayed "windows cannot complete the installation. to install windows on installation, this restart of the computer", I rebooted several times but the same error pops up

  Why not just do you do an Anytime Upgrade of Windows 7 Edition Home Premium to Windows 7 Ultimate?

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• Hard drive is full, but should not be under Vista

  I have a HDD 288 GB and for the last 2 weeks, he tells me it's full and I have no idea why.  I deleted the files and folders and free space, I took custody of fill right back up again!  I also searched through files and folders and I have about 200 GB reported missing.  I also ran an anti-virus software, anti-spyware and firewall is running.  But my hard drive keeps filling.  I have already downloaded and run WinDirStat, and it found nothing.  I have a 288 GB HDD and only 3,94 GB free.  It shows that Go 79.5 is on 'My Computer', 73.5 GB C drive and 6.0 GB on my D/recovery disk.  What takes my space drive hard and how find and get rid of it? Thanks, Mayet

  * original title - my hard drive is full and I do not know why.*

  "Well how DO I SHOW them where they are when they are HIDDEN and ENCRYPTED?

  ' 4.3 GB has been filled MORE hidden and encrypted copes of my own files with mozy!

  "Dell told me that because they are hidden and encrypted want it only I can delete them is to do a clean reinstall of Windows.

  I'm sorry, but it's the process of Mozy which is causing problems.

  We can not help you with that.

  Here is the Dell Recovery Options to reinstall vista:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I want my user to my main hard drive i.e. hard drive by default but my OS on the SSD without the user on the ssd

  * O.T. > default player

  So I set up my Pc with an SSD and unplugged my of my motherboard main HARD drive, so that Windows would automatically install on the SSD. It installed and now I connected the main HARD disk but the SSD is always default. I want to have my my main hddd user but my OS on the SSD without the user on the ssd, because it would take too much space. So basically I was my OS to run from the SSD but my user, download, App Data etc... to come from my main SSD, but I don't know how to do it. Help please?

  -Va

  My recommendation would be to open the C:\Users folder, then go to your user folder (probably 'Will' or a good thing?)

  Now take the record office and HOLD DOWN SHIFT while drag you it to another player.  When you drop, Windows automatically updates the registry of this folder paths so that all you ever put on your "office" (office of real desktop wallpaper) is actually stored on the other drive.

  Do the same for your Documents, downloads, photos, videos and other "Shell folders".

  You can indicate that a folder is a special folder redirection-able by clicking Properties.  If you see the 'Location' tab, then this folder can be redirected to another drive.  Almost everything in your user account folder is like this (by dragging while now shift is the quick way to update this tab 'Location' to redirect the folder to another drive).

  It is technically possible to literally redirect the entire folder 'Will' for example, but I do not recommend it for a typical user account unless you have some super specific needs, and redirect folders shell as this will get the huge majority of data written in your user folder.

• Satellite Pro L650: Windows could not complete the installation on the new HARD drive

  At the present time, I have a 500 GB HARD drive installed. As soon as I got it, I did a recovery on 3 DVD media.

  I just tried to replace the HARD drive with a 1 to one. All copied OK and after dvd 3 that I was told to release the dvd. I did this and the computer turns off. I turned it on and it started to (don't remember the exact words used) set the drivers.

  However I have now received the message that "Windows cannot complete installation" and telling me to reinstall. I did it, but after the steps above have repeated the same message appears.

  Pls help.

  I don't see why my computer should be limited to a 500 GB HARD drive.

  Thank you

  Hello

  The computer is NOT limited to 500 GB HARD drive
  You can use more big 500 GB hard drives. You have confirmed that the laptop supports 1 TB HARD drive and the system recognizes the 1 TB HARD drive.

  The problem could be the use of the recovery diskette. Why?
  Because the recovery disk creates the same partitions that were available on the 500 GB HARD drive. This could create problems of system due to the large size of HARD drive.

  Solutions?
  Well, I think that you could install the system by using the clean installation of Microsoft Windows disk.
  Missing other drivers or tools can be downloaded from Toshiba page.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 7 reassigned by external hard drive letters and PE8 do not accept the new letter

  Sometimes when I move my external hard drives around, Windows will eventually assign different letters for the readers. It seems that all the other programs I use understand how to switch to the new drives when looking for files, but PE8 doesn't. He asked me where the N:files/video/movie.prel file is located. When I find the file in O:files/video/movie.prel. Click on enter the PE8 returns with one does not find the file error and asks us to locate it again. I reinstalled PE8 in the past to deal with the problem, but is there something easier to do.

  The trick is to tell Windows to permanently assign a drive letter to this drive so that it will not assume that this is a new drive, every time you turn it on.

  This discussion to Muvipix.com tells you how.

• I have a laptop with a licensed copy of XP Home but do not have the installation disc. How can I get the XP Home reinstalled without having to buy another copy

  Laptop has a heavy program that runs in the background constantly which makes the device unusable (I think it must be some kind of virus ' cos nothing appears in the Manager of tasks or processes) and I want to reformat the hard drive and reinstall XP from scratch... bought the laptop second hand with XP already installed and never had a copy dvd.

  Makes the laptop?  If you contact them, they might be able to send a copy of the records for a small fee.

• CS5 Master Suite 2 drive will not complete the installation. Help!

  I have an iMac with OS X 10.6.8 v.. I am trying to install Adobe Master Suite CS5. The first disc had a little trouble being read first. It would auto eject after a few moments. Then on the third attempt it works beautifully. He finished his part of the installation, then Adobe Application Manager said: "Please insert CS5 Master Collection disk 2 disk to continue." I put the disk in it, then ejects itself after the computer tries to read it. I tried this story 20 times hoping that it was just a glitch the first disk. It still does not work. To make sure that it wasn't my DVD drive in the iMac, I played a DVD movie. The film has worked perfectly.

  My only conclusion at this stage, is that there must be something wrong with the disc. Please help me understand this. I have a few days of work and I want to transfer all my photos and work in the new software so that I'm going. Any help is appreciated.

  Thank you!

  -Ryan

  I see no problem downloaded cs5 master suite from: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  try again with this link.