I'll pay the first person £5 via paypal to do the following for me.

Similar Questions

• pay the license for DBA test dbs

  Hello
  I'm a dba
  I test full import/export for different scenarios, I created something like 6 databases for the test and I will use them for 1 week
  should I pay the license for these 6 databases?
  
  Thank you

  user9145417 wrote:
  and how can I proof that the guy from oracle audit

  Are you planning an audit?

  They are not omniscient. There is nothing in the software phones "home" to inform them that a new database is running on an obscure test machine. They melt on a person runs a test database on their laptop.

• I want my money, I never understood that I would continue to pay the following month for Adobe Stock 10 images in one month. Attendance is infamous.

  I want my money, I never understood that I would continue to pay the following month for Adobe Stock 10 images in one month. Attendance is infamous.

  Hello

  Please see Stock FAQ: How can I cancel my Adobe Stock?

  Hope that helps!

  Kind regards

  Sheena

• After purchasing the cloud creative and used for 2 months (for example), so I don't use it for 3 months. How is it? I don't have to pay the tariff for each month, or is it possible to only pay when I use it again? To resume: if I use it for 5 months a

  After purchasing the cloud creative and used for 2 months (for example), so I don't use it for 3 months. How is it? I don't have to pay the tariff for each month, or is it possible to only pay when I use it again? To resume: if I use it for 5 months a year, I have to pay for only those 5 or 12 months?

  No, if you have a subscription according to the type of subscription, you will have to pay each month or year until that you cancel.

  If you think you would use the apps for only three months, then you will not need three months, then our month to month plan would be best for you because it can be cancelled at any time it does not come with an annual contract for more information see the link below

  Adobe - General conditions of subscription

  Kind regards

  Bani

• Pay the license for different user

  Is it possible to pay monthly fees for Photoshop for a certain user through my account and leave the user connect via its own (new) account?

  The cloud as a gift https://forums.adobe.com/thread/1665610

• Pay the extra for the Portfolio if I pay $49.99 for CC?

  I was trying to portfolio and when I went to publish, he asked me to pay.  I already have pat $49.99 per month for the CC.  Should I pay to use the Portfolio?

  David Hey! Certainly send us a ticket here: help.myportfolio.com and we can take a closer look!

• I bought a subscription of dreamweaver through amazon, but get the trial offer when I try to download.  I have to pay the subscription for 3 months now, but cannot access the program.  I have installed and uninstalled creative cloud several times v

  Anyone know how I can get this program?  I'm paying for it but could not get anything other than a free trial!

  Hi John,.

  I checked your account details.

  The subscription is not yet activated.

  Please see this document to activate it:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Let us know if that helps.

  Concerning

  Megah Rawat

• If I pay the license for students will be able to use the Apps in all my computers?

  I want to buy the license but I would use half the week on my house fathers and during the other half, I would be at home. So I need to be able to use the applications on different devices.

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Who pays the most for the CC?

  This throw out there.

  In Canada, I paid a huge amount of $78,21 Sept. 1 for my subscription to the cc.  Today, 29 September I paid $76,76. In a month.

  My Bill says $49.99. Add tax and Exchange and the difference. Two billings in one month just about scrambled my marbles.

  Please contact the Support from Adobe on the Customer Contact

  Hope this will help you.

  Kind regards

  Hervé Khare

• How long will I pay the membership for the creative cloud?

  .

  It depends on the type of subscription that you purchased.

  There are different schemes:

  • Annual commitment plan - paid monthly
  • Monthly package-
  • Annual prepaid
  • Student and Teacher Edition. Paid monthly.
  • Student and Teacher Edition. Annual prepaid.

  For more information, see the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• To cancel, will I pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price? [was: need to pay the whole price?]

  Hey!

  I come from Germany and I recently bought the subscription for students 'Alle Applications' type a year / compensation mohntly.

  And now, I've read that you can't cancel the membership without paying 50% of the remaining subscription price. What it means

  I need to pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price?

  And now, I've read that you can't cancel the membership without paying 50% of the remaining subscription price. What it means

  I need to pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price?

  Complete half of the annual fee.

  Your contract is 12 months, paid monthly, to cancel the contract of 12 months, you pay the tax for the half of the remaining contract obligation.

  for example if you cancel after 4 months, cancellation fees are 50% x 8 months.

• explain the values for IO tablespace statspack & file

  10.2.0.2 aix 5.2 64 bit
  
  in the section Tablespace IO Stats & Stats of e/s of statspack and awr reports file can someone help to clear up some confusion that I have with the value of AV readings/s-AV Rd (ms). I'll be referring to certain values, I have one of my reports, more than an hour 1 snap shot period, with the first three columns being readings, av rd/s, av rd (ms) respectively for the two sections.
  
  I have the following for the Tablespace IO.
  
  PRODGLDTAI
  466 879 130 3.9 1.0 8 443 2 0 0.0
  
  For the e/s file, I have the following for each file in the tablespace.
  
  PRODGLDTAI /jdb10/oradata/jde/b7333/prodgldtai04.dbf
  32 113 530 2.6 1.0 0 1 302 0 0.0
  PRODGLDTAI /jdb14/oradata/jde/b7333/prodgldtai03.dbf
  30 107 878 1.6 1.0 1 898 1 0 0.0
  PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai01.dbf
  32 114 234 5.8 1.0 2 834 1 0 0.0
  PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai02.dbf
  36 131 237 5.2 1.0 1 2 409 0 0.0
  
  From there I can calculate that there are on average 129.68 reads every second for the tablespace, and which corresponds to what is stated. But whence the rd (ms) av? If there are 1000 milliseconds in a second and there were 130 reads per second, which does not 7.6 ms by read?
  
  AV Dr (ms), what exactly? That's how many milliseconds it takes on average to 1 lira? I read in the doc Oracle Performance Tuning should not be greater than 20. What exactly is this statistic? In addition, we are currently looking at the purchase of a SAN and we were told that the value should not be greater than 10, which is just a matter of opinion? These values would be little useless on the tablespaces and data files that are not very active over a period of hours of time?
  
  Published by: PktAces on September 22, 2008 08:31

  I replied to this post a few days ago and so I have a watch on the post - but my response seems to have disappeared.

  Yes - "av rd (ms)" is the average time for a reading to be completed. Roughly speaking, it is "total time waiting for the read request" / "total number of read requests.

  20 m/s may be based on the programming of schedules for older hardware (disks 10 000 rpm). If a manufacturer tells you that the average response time for an e/s (for example) is 6 m/s - which equals 160 e / s per second - so it is reasonable to assume that in a multi-user system with a reasonable degree of simultaneity that perceived for a user response time will be about double. (Read Cary Millsap on the theory of queues and Oracle to understand why).

  So the 10 m/s is probably work around this figure of 6 m/s 2 x and enabling caching of the effects a bit. As a very rough indicator of 'it is unhealthy, if the average is more than 10', it's probably a good figure. But you can't be sure that the SAN is healthy if the figure is less than 10.

  It is difficult – without knocking a SAN with tablescans and it will madly in readahead and will produce data very quickly to a single user, while sanctioning other users who make random IO. In contrast, that a cache of SAN can do a lot of work to protect an Oracle of real disk readings because an object is just enough used to stay in the cache of SAN when it can't stay in the Oracle cache. If medium-sized SAN can be very misleading.

  When you enter the land of SAN, you must keep an eye on v$ event_histogram, v$ file_historam, v$ temp_histogram for a time gap of I/O as a better indicator of health.

  In fact, your last comment about "rarely used" objects is a useful indicator. If something is rarely used, Oracle "physical block read" is probably is a real disc read - an indicator of data how fast can detach from the SAN.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen Hawking.

• Need help with the error of the EFS for SBS 2008

  I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008.  Server doesn't let me encrypt on our network.  Our certificate on the server says it is valid and run cipher/r does not solve our problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Updating the measures for Win - XP Pro, SP1 to SP3 (jump SP2?)

  I do volunteer work 1/2 day per week for a small organization non-profit organizations with a very limited budget (almost non-existent). We work in the given space, but have free access to the DSL service.

  We have the following...

  1 2000 computer HP desktop, Intel Pentium 4, Windows 2000, 256 MB RAM, 30 GB, CD - R, IE - 6 hard drive.

  2 2006 Compaq desktop with Win - XP SP3, 512 MB RAM, 60 GB HD, CD - R, IE-8.

  3. computer acer laptop 2008, Win - XP SP3 with 512 MB RAM, 40 GB HD, CD-R/W that works (depending on what day of the week, it comes), IE-8.

  One of our local "family" donated the following for us...

  2004 work HP desktop with Win - XP Pro SP1, 512 MB RAM, 105 GB HD (less than 30 GB used), CD - RW, DVD-R, IE-6,

  -plus a new module of RAM of 512 MB which could be installed.

  -a new, but not installed, updated graphics card.

  These two were going to be installed, but the client fell sick and recently passed away.

  While this desktop computer is older, it has been used very little, 'C' part of the HD less than 30 GB of 105 GB used, less than 2% of disk fragmentation, no scratches, dents, original basic mouse and keyboard... excellent shape.

  In order to remove the HP 2000 desktop computer, I suggest the following...

  (A) delete all the old software, except the WIN - XP.

  (B) defrag the HD.

  (C) the Win - XP, SP1 rollback "original updated" status. HP support pages imply that he is a "clean install". HP has the SP1 of Win - XP original on a segment of "recovery" of the HD.

  What else is necessary (I guess)...

  1. install the new 512 MD RAM module.

  2. check that the current power out sufficient to manage the 'new' graphics card (requires 250 watt power)... and install the new graphics card... or just stay with the existing graphics capabilities if the power supply is insufficient.

  3. update all hardware drivers.

  4. load Win - XP, SP2, and SP3... or just go to SP1 SP3? (comments, please)

  5 install Internet Explorer 8... or IE-9? (comments, please).

  6. use of Win - XP SP3 and security center firewall... or install (?) for a protection antivirus and antispyware... suggestions sincerely appreciated.

  7 install MS Office 2007 Pro (unused software, gift).

  My dilemma... What is the sequence own/recommended to perform all these steps...

  A / B / C / D? and 1-2-3-4-5-6-7?

  Remember that we do not have money for a new computer, but I don't have the time and (I think) the ability to perform the steps.

  Thanks for your suggestions, recommendations and comments.

  Greetings - FLgal

  Your Service Pack 3 CD contains the SP3 .exe Setup file, so you don't need to download what you fortunately already.

  If you need to download this file, it would have been safer to do using another PC. But since you have it, don't you worry in this regard. :-)

  So you're on the right track!

• How to report the current time on the ESX host in to a csv file with the following

  Hello guys

  I have the script next where I make the required details except the current time on the ESX host. Anyone can guide me please.

  		{foreach ($esx to $vmhosts)
  			$hostVC = $vcenter
  			$hostCluster = $esx. Parent.Name
  			$hostHost = $esx. Name
  			$ntp = $esx | Get-VMHostNtpServer
  			$hostNTP = "$ntp".

  			}

  I want to integrate the following for loop of the above for loop and ge the output in a single table.

  foreach ($esxcli in get-vmhost | get-esxcli) {"" |} {Select @{n = "Time"; e = {$esxcli.system.time.get ()}}, @{n = "hostname"; e = {$esxcli.system.hostname.get (.hostname)}}}

  Add-Content - Path '$hostVC, $hostCluster, $hostHost, $hostNTP, $hostTime' $hostInvFile - $ hostTime is where I want to get my host right now.

  I'm vcenter, esx name, name of the cluster, host of the ntp server address, but I need the host thus present.

  Thanks in advance.

  Thank you

  vKar

  Try changing the line where the script retrieves the VMHost to this

  $vmhosts = get-VMHost-State connected. Name sort

  This way the script will be only to ESXi nodes that are "connected".

  Pick up time for those defective does not much sense in all cases