I'm able to stick to the built-in keyboard?

Similar Questions

• Satellite A200-1AG - malfunction of the built-in keyboard

  Hi all

  Update of the BIOS Toshiba Satellite A200-1AG, but the model was wrong, she was PSAE6E and should be PSAECE.

  So everything works ok, external USB keyboard, but using the built-in keyboard certain keys fail IE:

  pressing on * e * key I get "egg".
  pressing on * i * key I get "egg".
  pressing on * 3 * key I get "38".
  pressing on * 8 * key I get "38".
  pressing on * d * key I get "d".
  pressing on *, * key I get "d".

  I used a software to quickly show the key and I all 2 keypreses cases are shown.

  When I reflash / update the correct BIOS, the problem persists.

  This happens in windows under linux OS.

  What I could do, I think it's a software / BIOS firmware error (+ could be bios code of the keyboard microcontroller? +), but I'm not sure.

  I read some comments SLIC and bios MOD, but it is more difficult for me to understand. I don't know how and if it could be useful.

  Assistance may be useful.

  Thank you

  > So everything works well, also external USB keyboard, but the built-in keyboard some keys fail IE:

  This is not a BIOS problem
  You said that external keyboard work correctly, this means that keyboard controller and BIOS is OK, but in your case the internal keyboard started to malfunction
  This means that the internal keyboard needs to be replaced

  By the way: you can not Flash the BIOS to NOT compatible version fact is that the update of the BIOS supports some sort of protection, and the update process wouldn't start using bad BIOS.

• (MacBook Pro retina, 13-inch, early 2015) The built-in keyboard and trackpad multi-touch responds

  Sometimes the Trackpad and keyboard from my MacBook Pro retina, 13-inch, early 2015 responds at the same time, have no other choice I have shut it off by holding the power button.

  Help me to solve this problem, if anyone knows the same problem or someone have it fixed.

  Technical specification :

  Operating system: OS x YOSEMITE 10.10.5

  MacBook Pro (retina, 13 inches, early 2015)

  2.7 GHz Intel Core i5 processor

  8 GB 1867 MHz DDR3 memory

  Storage 128GB PCIe - based flash storage

  Graphics Intel Graphics Iris 6100 1536 MB

  ROM version: MBP121.0167.B14

  Version SCM (System): 2.28f7

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• It is possible to activate the editing on the built-in keyboard tools

  Shortcut keyboard iPad, in addition to suggestions, bar also displays editing tools.

  

  I would like this feature on my iPhone. I understand that there is no place for this in orientation to portrait, but whereas in landscape orientation, it should be possible to squeeze some of them.

  

  Is there a way to activate the editing on the keyboard of the iPhone? Maybe a hidden option?

  Since the iPhone user Guide, this explains how to change the text (e.g. bold, italic, underlined) on the iPhone:

  http://help.Apple.com/iPhone/9/#/iph3c50ee9e

• Is it possible to see your history of typing Iphones? (What are the words had been previously typed on the built-in keyboard)

  If the subject was not clear, here's the long version. I literally just used my iphone to type a new password and I've already forgotten the password and it has not been saved. What I want to know is if there is a way to see my Iphones typing history so I can recover the password. If his 3rd party software or not, I'd really like to know if there is a way to find my story. I have an IOS 8.3 and the password was typed only once

  No, there is not. If you have forgotten your password, you will need to restore the device to remove it. Then you can restore your backup to recover your content. See this support document for instructions. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• I can copy a URL, but may not be able to paste into the body of an e-mail message. Also the hypelink doen't it. I don't have this problem with Internet Explorer...

  When I copy a URL and go to paste it into an email, it will not stick. Another box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When you use Internet Explorer, I don't have this problem. I'm new to FF with a new computer.

  Paste a link in the subject line does not a link so that the part is normal. But being not not able to paste into the body of the e-mail is not. I can't think of a reason that would happen. What email program are you using?

• View topic - the games shown in a small window on the built-in screen

  I have a SAT. 2805 S402 with Nvidia GeForce2Go chip. I was able to play a couple of my games to the resolution by default (1024 X 768) until I plugged in an external monitor. Now, it displays these games in a small window on the built-in screen. How can I reset this? I've updated my directx stuff, got hardware acceleration, the max value, etc.. DirectX or my driver Nvidia said games to display this way so they will better work?

  As I said, I could read them before fullscreen, I added the external monitor. They were a bit blurry, but I liked better. Kyodai Mahjongg always play at 1024 X 768, but no Tetris 4000 or Atari Arcade.

  Hello

  I put t think directx will help to run these very old games using the full screen.
  In addition, you should always use the Toshiba graphics driver and not the original manufacturer s driver. The Toshiba driver is a slim original graphic driver version and includes a graphics card, protection against overheating.
  I think that this problem occurs only on some games and other games works ok so I n c ELA think other drivers will solve this problem.

  Good bye

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• objectives of transfer of external memory stick to the computer vista

  objectives of transfer of external memory stick to the computer vista

  objectives of transfer of external memory stick to the computer vista

  ====================================
  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  memory card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista: How to customize AutoPlay
  http://www.wintuts.com/AutoPlay

• WLan AutoConfig was able to start with the error 193:0xc1

  Former title: error 193:0xc1

  My wireless does not connect because it says that the WLan service failed to start.

  I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

  I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

  I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

  I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

  Hello
   
  
  Step 1.
  Follow the steps below and check if the problem is resolved:
  a. Click Start, and then click computer.
  b. go on the system disk, where the operating system is installed (usually drive C :).
  c. find the program file.
  d. remove this file and restart the computer and check if you are able to start the service.
  Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
   
   
  Step 2.
  If the steps above to solve the problem I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
   
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista sticks to the Welcome screen

  Hi, I read some of the posts that people put here and I can not find an answer for my problem, my friend has a computer laptop sony vaio and when she takes care of vista, it sticks to the Welcome screen, I got him to try to connect by using safe mood, but it just goes to a black screen and hangs , I don't particularly want to do a system restore because it has all its courses on the hard drive and that she wants to keep, is there someone who can help at all that it becomes a little depressing, especially since I have to talk to him about what to do on the phone? All responses will be welcome :-)

  Different is the system restore and system to factory settings recovery there.

  System Restore does not usually affect the data, such that it updates only one hour earlier...

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to disable the built-in PDF Viewer and use another Viewer at all times?

  How to disable the built-in PDF Viewer and use Adobe Reader to view the PDF files, without having to set this preference, whenever I open Firefox? The default setting to "Use Adobe Acrobat (in Firefox)". Thank you.

  It's strange. The integrated Viewer - Viewer by default - is described by the expression 'Preview in Firefox' and you will have changed to "Use Adobe Acrobat (in Firefox)".

  Well... you or an add-on or another program on your system must be changed.

  What happens if you disable the Adobe Acrobat plugin (not the extension to create a PDF file, leave it active). Here's how you can try this:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find "Adobe Acrobat" and change the permission 'never enable '.

  Then in the Options page, Applications Panel, change your preference for "Portable Document Format (PDF)" to "Always ask" so you get the dialog box to download instead of the PDF, open in a tab.

  It sticks?

• How to remove the built in account Admin

  Hello
  I have a problem with my administrator account as some of my applications do not launch integrated but they are themselves launched in my comments (I have converted to the account Admin using the command netplwiz ). But the problem is that now I want to get rid of my built-in Administrator account, but I'm not able to do. So far I have tried to do...

  (1) have all given permission for my guest account by running the command netplwiz .
  (2) open the command prompt on my guest account by getting the problem when I typed /delete "-account name" net user , I got the error "System 5" error. » Who is related to permission problems...
  (3) Control Panel-> user account-> remove account... when I tried to do that, I followed all the instructions until the end... But even after the account is still there...

  I don't know exactly what is happening with the 8.1 Windows (my bad decision to upgrade my windows 8 is to blame!). This window is driving me crazy because he is not the only issue I have with Windows 8.

  If there is something that remains to be tried it please let me know!
  Thank you
  Ekant

  You should never use the built in the administrator account on a regular basis and the guest account is not intended to be used as an administrator account. The two should is disabled and only used when they are needed. You should do yourself a time account administrator and a standard account that should be used for everything that does not require an administrator. Administrator account must be used as needed. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir