I'm confused why intel pantium 4 duacl core E5400 with havy loads of ram uses without games?

Hello

The last time I saw my friends PC I just Re installed Windows 7 ultimate, then a I am new facility.

But this pc using more then 1.5 GB of ram, an Intel P4 DC E5400 processor, 3 GB ram, 320 HARD drive. And a new installed W7 Ultimate 64 bit.

I remember that "that the pc was created with small budget, I upgraded from 2 GB Transcend DDR2 RAM.

It's a common to the amount of RAM to be used by 64-bit Win7.
64-bit uses more RAM than the 32-bit and 4 GB is generally considered to be the minimum desirable
amount of RAM with the 64-bit operating systems.
-My 64 bit Win7 uses currently 1.98 GB RAM with 5 tabs open and 53 of the browser background
running process.

For stability, it is recommended to upgrade RAM with more of the exact same make and model,
or at least the same amount with the same characteristics (speed, timmings, and voltage),
like what you use.
If the machine was only a bar of 2 GB of RAM that a more of the same would be good.
If she had two more of the same could be used, two sticks of 1 GB
or just replace the RAM of origin with a kit of two factory with 4 GB of RAM (2 X 2 GB).

Tags: Windows

Similar Questions

  • Why won't my PC now run with 2 1 GB Ram?

    In April 2008, I bought and built a PC with hardware for Overclockers. 1 card mother Asus P5K, 1 Intel Core Quad Q660 Pro 2, 4 x 1 GB DDR2 Crucial, MS Vista Home 32-bit ballistics. He ran for a while, then began to blue screen - Bios loop, in camera. Discovered that software 32 bit no longer works the 3 GB of Ram, so if she had a dream running with only 2 GB of Ram.

    Recently loaded down what I thought was an update from MS, has proved to be the Windows Live Messenger 2011 (Build 15.4.3502.922) Version. But, Ok!

    Now my current problem. Everything went like a dream for a while, then she started to do some weird things. Then she started the blue screen - Bios loop, in camera. By trial and error, I find that it will run with 1 GB, Ok, (but slow as the 1 GB is used facing upwards). Whenever I try to use the 2nd go. It's the blue screen - Bios loop, in camera.

    I want to get the 2 GB of Ram in. Can someone help me?

    Since Saturday, when, when I posted the Codes to stop, I have re-installed the 2 GB of Ram, to check the Codes to stop with the two GB of ram.

    For reason unbeknownst to me has been operational since the PC without any problem.

    Thanks wb2001 & dax1792 for your time.

    Trevor

  • Why IE7 becomes errors HTTP 400 XP with a good connection?

    What follows is an adaptation of article How-To-ask questions on your main page of the forum, which is so convenient I save it as a model of :

    • Build number of VMware Fusion: 2.0.1 (128865)

    • Mac:  Mac Pro w /.

    • What is the problematic behavior and what makes: most of my IE bookmark current HTTP 400 errors of links here, even the searches using the Google toolbar report 400 Bad Request.   Examples: http://www.google.com/webhp?sourceid=navclient & ie = UTF-8 or http://www.netflix.com/MemberHome IE diagnose connection problems indicates that the connection is good.  The same addresses open using Firefox (copy/paste).  All the tested links worked fine a few days ago and I have not changed the system or the software in XP Pro.  Bit Defender Internet Security software reports no problem and none of the links are listed as delimited (also not limited in IE options).

    • Have you tried looking for the Forums of Discussion for an answer?  Yes, I found some similar problems, but not the same.

    • What you have already tried:  As suggested in a forum post, I checked the connection parameters (they are all set to detect automatically).  Also, I downloaded IE 7 on the MS site and reinstalled.  No joy.  I checked the Internet Options (although I have not changed anything) and set the security in the middle (it was set to high heat).  Has nothing so I put back it.

    • The conditions where he works: addresses, and links on these pages also work.  Example: http://gis.esri.com/partners/hw_promo/hw_promo.cfm

    • How many times you see the problem:  Never had this problem before.  It started a few days ago, and happens whenever I tried wrong addresses (except for Netflix, which loaded once after having failed several times and has not loaded since).

    • He has already worked in the same configuration (same VM, same computer), and if so, what has changed since then:  Yes, it worked a few days previously, same machine, same VM, even XP, same everything I can think of.  The only change I know is daily updates to the data Bit Defender virus.

    • How experienced with OS X, you are, and you are comfortable with the
      command line:
      system administrator intermediate for Mac OS X and Windows XP Pro, except that I am a permanent newbie with virtualization and nothing networky.  I can do the command line as I tells me exactly what to enter, and why.

    If you experience problems with a guest, include:

    • Guest operating system:  Windows XP Pro 2002 SP3 with 3 GB of RAM, automatic updates is on.

    • VMware Tools:  Installed, but unknown version (how do you like that?)

    • Not a Boot Camp virtual machine

    • Virtual Machine created in Fusion

    If you experience problems with an application to a guest, include:

    • The application name and version:  Internet Explorer 7.0.5730.13

    Mac:

    • Dual-Core Intel Xeon 2.66 GHz (2 CPUs, 4 cores)

    • RAM: 11 GB

    • Graphics card: NVIDIA GeForce 8800 GT

    • What version of the OS version: 10.5.6

    If you are an error, including:

    • Where the error message (for example, an application in the host, the guest himself, OS X, etc.): errors HTTP 400 using only the IE browser

    • The exact text of the error message: "Web page is not found" or "bad request".

    If you experience network problems, including:

    • Network type (e.g. NAT, bridged or host-only): NAT

    • Guest network information (Windows: ipconfig/all at a command prompt): is there a risk of flight security or identity if I provide this information?

    • Host information network (run ifconfig-a in a Terminal window): is there a risk of flight security or identity if I provide this information?

    Other Notes (not things that might be related but probably is):  I had intermittent problems with my wireless modem; it loses its connection and resets all configuration.  The incoming connection has been tested and is fine all the way to the modem.  Wired connections are not lost; Wi - Fi access only.  I need to reconfigure the wireless settings to restore the service.  The modem is replaced.  Also, my wife is having a very similar problem on his iMac (no virtualization) where Firefox reports some pages Web cannot be found, but Safari loads using the same exact address; and his computer accesses Internet wireless via my modem.

    So the Question is:  I need to use Internet Explorer through Windows for some sites, regardless of whether a different browser can load pages, because some websites work just using IE.  How can I get IE to work again?

    I don't think that you need to test with a clean build roll back to IE6 running.  This means, basically, that the question is problem IE7 and OS or Windows and not a problem of Fusion.  When you have time, I would like to reinstall IE7 from the standalone downloadable update and disconnect from the network, so it can not retrieve updates while it is installing and before making updates after that Windows can check see if IE7 works and do Windows updates and check again.

  • Why can I never get a good picture on my imac when using Skype?

    Why can I never get a good picture on my imac when using Skype?

    I use the free Skype to talk to my friend in China every week. They always see me on their computer or phone clearly, but I can never get a good video of them, clues why? I see a good image of myself, but never of them. I can't adjust the settings of the built-in camera because they are fixed. Is this my router modem, which is 8 years old now. What is causing this problem. If you look on YouTube there are hundreds and thousands of good quality webcam videos then why am I having this eternal problem year after year? I've got El Capitan OSX

    If they can see you clearly, the problem is not on your side - at least not in your Mac. Could be the router or you internet connection. Otherwise: https://support.skype.com/en/skype/mac/

  • Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

    Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

    You say Apple your wishes on the link below.

    http://www.Apple.com/feedback/

  • Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do?

    1. Question

    Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. When I search on a topic I keep several notebook open until I finished. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do it again?

    Also at this time, the length of the sentence, I type has changed.
    There is no limit for how far she can extend to the right.

    Help, please. I'm not very irritable and don't understand Computerese.
    Please explain in English every day.
    Thanks in advance,

    bouquet

    Bouquet,

    Great to hear that your problem is finally solved.

    Regarding 2nd query you have raised, it is not possible to have the program running if you turn OFF the computer (it's like saying you want the bulb to keep bright despite off). When stop you the machine, you turn off the power... so there is no way that the current state maintained. When start the computer again the next time it starts on new.

    But there are 2 options that can help you with your problem: -.

    1 SAVE your changes before you close the program, and choose next time when you start the computer

       File ->Open (This way your work is preserved and you need not start afresh next time onwards)
    

    2. instead of turning off the computer, choose to Hibernate. When Hibernate you (and NOT CLOSE) the current state is preserved. This means that if you leave the notebook running he will remain in the same State when you next start your computer the next time.

    PS: as this forum is for the FF to discuss related issues, I propose that for further assistance e-mail me at my personal mail ID [email protected]' rather than discuss it here on this forum

    Now your problem is solved with kindness mark this as closed discussion (marking/choice of appropriate solution helped you)

  • I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

    I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

    Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

  • Why is the uncompadible again toolbar google with ff5 and his long, since the introduction of ff5 why havnt u fixed it

    Why is the Google toolbar always uncompilable with ff5 and his long, since the introduction of ff5, why do u not have this fixed

    You are welcome.

    Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

  • Why Firefox is not saving my log in info after that I used the option "Remember Me"?

    Why Firefox is not saving my log in info after that I used the option "Remember Me"?
    Whenever I get on a frequently used site where I have already indicated on the Firefox browser to save my log in info, I still need to manually connect. The latest versions of Firefox are not like that. I am running Firefox on both my Imac (OS 10.5.8) and on my Mac Book Pro (Snow Leopard), and on each machine, the latest version of Firefox does the same thing. I don't have this problem with Safari, but I prefer to use Firefox then please let me know if there is anything I can do to solve this problem.

    This has happened

    Each time Firefox opened

    Is two months ago

    If you register your name, and your password in the password manager and then having no other effect that Firefox can fill these name if necessary.
    Firefox is not automatically a session you.
    Many Web sites may use a cookie to remember you, you do not need to open a session.

    Websites to remember you and automatically log you are stored in a cookie that you must allow: Firefox > Preferences > privacy > Cookies: "Exceptions."
    Also make sure that you do not use the delete, search and download Firefox browsing history to erase "Cookies" and the "Site preferences" "browser history".

  • Why not "share" Garage Band as mp3 with iTunes 10.1.0 regardless of the import settings?

    Why not "share" Garage Band as mp3 with iTunes 10.1.0 regardless of the import settings? iTunes is configured to import into the mp3 format, yet each importation of Garage Band since update last week comes as AAFC and must then be converted to mp3.

    Use "share > song on the record" in GarageBand and button and select the "MP3". Then import the exported to iTunes MP3.

  • Why windows xp 32-bit supports only 3.25 GB of ram?

    Why windows xp 32-bit supports only 3.25 GB of ram?

    Tehre is no solution for this problem, and I don't want to install xp 64-bit,

    coz its not user frndly, thank you

    My apologies, I must have misread the topics when I did my first answer. For some reason, I got it in my head, whether you use Windows 7 32 bit.

    I stand by my original comments well that although I appreciated now that you are referring to Windows XP.

    If you want to go to 64-bit Windows XP I'm not sure if this is even possible now. Unless you buy a commercial version second hand. If you can, make sure that it comes with an installation CD.

    To check the compatibility 64 bit XP the following may be useful...

    http://support.Microsoft.com/kb/896456

    http://support.Microsoft.com/ph/8599

    It will be even more important to check the hardware/software compatibility via the websites of the manufacturers.

    Tricky

  • Why Windows keep moving & hide my files with me?

    original title: make him stop, please stop! Why Windows keep moving & hide my files with me?

    Windows Vista using Media Player 11:

    I am way in music and want to have recorded and named in a certain way.  Sometimes in windows 'Explorer' I group songs into folders according to the albums I create (i.e. mixtures of burning); in this case, I'll keep the names from the same artist and change the name of the album (in properties) that I chose.  As soon as I click on the folder 'Explorer' moves it somewhere, I don't think.  Sometimes things end up in the trash that I know does not recycle.  It also renames my files.  For example, I had a song that I had saved the name of the file is: 01 History.wma; and the rest of the info has been saved in the properties (Album, artist, track number, etc.).  As soon as I turn my head the computer renames it to something that looks like this: 01HistoryAtmosphereSevensTravels - UndergroundRap.wma.  Why it does this and how can I stop it?

    Hello

    ·         It only happens with music files?

    ·         When the issue started?

    Step 1: Run Virus scan.

    Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can do an online scan by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

    Step 2: Rebuild the data base of the media player.

    Follow the steps in http://support.microsoft.com/kb/925718

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why do I suddenly had a .qif with bank transaction file appear on my desktop!

    Why do I suddenly had a .qif with bank transaction file appear on my desktop today that were not there when I turned it off last night

    Hello

    1. have you made changes on the computer before this problem?

    2 are you able to open these files before, have you seen this message before popup on your computer?

    3. is there someone else your computer?

     

    The. QIF file is and ASCII text file. While you can view and edit the file in any text editor, be very careful as the format of the file and the order of the items in the file are essential for the proper execution of the file.

    NOTE : If the files are reappears or multiply on its own, so I recommend you to run the Microsoft Safety Scanner to remove all viruses in the computer that could create this file. Viruses are known to come. QIF file format. I suggest you to not open files if you are not sure about this and rather wait for the Microsoft Safety Scanner complete to ensure that it is not virus. Once the analysis is complete and the threat of virus cleared so you can view the file. If you think that the file is not linked, then you can remove the same.

    Run the Microsoft Safety Scanner and check if that helps resolve the issue.

    Microsoft Safety Scanner:
    http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Note : the data files that are infected can be cleaned by removing the file completely, which means there is a risk of data loss

    Also try to perform a clean boot and check.

    How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135 
    Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual

  • Why xbox 360 controller does not work with all pc games

    Why xbox 360 controller does not work with all pc games

    Ask in an xbox forum.

  • has ran DXDIAG can't find where to download Intel(r) HD Graphics (core i3) on windows 7 64 bit

    has ran DXDIAG can't find where to download Intel(r) HD Graphics (core i3) on windows 7 64 bit

    Anyone have a link where I can find the driver update for this im trying to play battlefield 3

    Hello

    In this link.

    Good luck.

Maybe you are looking for

  • Impossible to install El Capitan on new SSD

    Trying to install El Capitan on using the method of USB drive on my mid 2012 13 "macbook pro (9.2) and I can't seem to make it work at all. Using a SSD 240 GB PNY CS1311. When it starts to install El Capitan I get about a minute before it stops and s

  • New HP Jet 7 with new 32GB SD card - can't see SD card on Stream 7 to all the

    I got a Sandisk Extreme UHS1 of nine 32 GB card and you will see all of the other systems I got (including Linux and Mac OS), read, format the card, etc. - the HP Jet 7 is not simply to see the map at all. I even formatted in another 8.1 Win in FAT32

  • Should I be worried?

    I just bought (got free, rather) a new contract with AT & T and the Backflip refurbished. I was previously on the go phone prepaid service. I read a lot of threads problem concerning the backflip and am worried now to get this phone. Should I worry t

  • IMAQ + Vision Assistant cunning edge detection

    Hello I would like to ask where can I find a tutorial or an example how to use IMAQ Canny Edge Detection modul with the Image Wizard. I enclose my VI here for more information. Best regards

  • Print screen screenshot - Windows XP Professional key

    I'm working on Windows XP Professional system. I tried to print the screen with the print screen key but without success. Kindly help how do I print screen. Thank you Mohammad Hussain E-mail: * e-mail address is removed from the privacy *.