I'm doing my computer like new.

Similar Questions

• How can I keep my computer like new?

  Good evening! I recently bought a Macbook Pro! It's my first Mac computer and I want to get the best out there! I need to download an anti-virus? Any advice you might have are appreciated, thank you!

  Welcome to the  club!

  I do not mean to be in a bad mood, but if you're in a world of Windows - there are a few basics that you may need to reconsider

  After Anti virus is one of them - the short answer is No.!

  In the words of one of most respected posters here

  Re: do need me anti-virus software for my macbook pro?

  Also - https://www.apple.com/support/macbasics/

  New - Welcome in the world of Mac - please let us know of any problems / questions

  You may also re consider the 'iOS 9.3.1"in your signature on the Mac, we are on 10.11.4

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  Hi set231,

  When you install a new driver, it is recommended that the PIXMA MG6320 is not connected to the computer.  Please sign in when prompted during installation.

• My computer does not recognize my new printer HP Deskjet 3054 A J611

  my computer hp with windows xp does not recognize my new hp deskjet printer j611 3054a. It is supposed to be wireless and is connected to my router but there is no way the station will be operated wirelessly.i tried the instruction booklet and other tips, but nothing helped.

  Router connections generally need to be configured in "internet connection".

  Properties. Or try to open "printers" in the Panel, xp need address

  Properties to connect. In addition, wireless technology, blue tooth, etc., done years of

  perfection, the tech just has not been developed yet...

• I'm trying to set up the new account on 2nd used computer, Outlook Express does not accept my new password.

  trying to set up the new account on 2nd used computer, oe does not accept my new password.

  If this account POP3? If you try to set up the same account on a second machine, all settings including the password must be the same.

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  You should probably just download the demo version of the EP 12 and see if you can live with it.

  Download a free trial version or buy Adobe products | Adobe Downloads

  That being said, you tried to install PES 1 on your computer?

  How much free space is on your hard drive?

  You have Internet Explorer 10 or 11?

  PSE 1 can run on windows 7 x 64, if certain conditions are met.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• iTunes sees my camera like new

  When I connect my iPad to iTunes, iTunes thinks the iPad is new and says "Welcome to your new iPad.  It gives the option to restore from a backup or set up like new.  I don't want to save or load like new.  All I want to do is sync it and save.

  Hello fz62007,

  Thank you for using communities of Apple Support.

  I see that when you connect your iPad to iTunes, iTunes thinks the iPad is new and gives you the ability to restore from a backup or set up like new. You only want to sync iPad and make a backup. I know how it is important to ensure that your iPad is established and synchronized how you would like it. I have something I want you to try.

  If you choose set up as new, it will then take you to a screen that will allow you to sync your iPad with iTunes. See the following article:

  Sync your iPhone, iPad or iPod touch with iTunes on your computer through a USB port

  And this will help you to make a backup of important data on your iPad:

  The backup of your iPhone, iPad and iPod touch

  See you soon!

• I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  bavarian1 wrote:

  I'm sure that my computer is up to the task, but I don't always have the answer No 14 elements camera raw support the d810 nikon?

  John

  I told you in my first post "in short, PSE14 may", Yes, the PSE13 and 14 support Nikon D810.

• Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  I have already updated to the last DC v15.009.20077...

  So I found a way, if I do it just right, it works (with the file, click the "tiny" file and then save as. I made the mistake of first pressing the home much more first. Really not intuitive or easy to use even if... Looks like you have replaced the button "save under" with the "save in the cloud." We use mettle at work, and the cloud of Adobe is irrelevant for me...

• Why my form does not compute?

  Can someone please tell me why all of a sudden that nothing does not compute when it was working fine earlier? I moved that a few small things around, but can't see why it won't calculate at all.

  http://www.milesmemorials.com/estimator.html

  First, make a backup copy of your page before doing anything else.

  First off, you have the input field 'minsiter_fee_crem' associated with 'Meeting place for service' select tag (cf. infra red): partner which, with the correct, select the tag option "Select Minister."

  Venue for the service
  

  
  

  -Select venue-

  (Included) crematorium Chapel

  Church or chapel prior to crematorium including organist & Orchard (£120)

  £

  I don't know what of supposed to go in the field "Select the venue", because you don't seem to have a variable associated with relevent there so go 'civil_fee_crem', which was in the field "Select the Minister" in it?

  Then modify the script at the top of the page:

  minister_fee_crem = Number (document.catwebformform22057.CAT_Custom_00003.value)

  civil_fee_crem = Number (document.catwebformform22057.CAT_Custom_00006.value)

  If I'm honest I have no idea why some are written as:

  carry_fee_crem = Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_76923)) and others like:

  crem_fee = Number (document.catwebformform22057.CAT_Custom_76930.value)

  To get "additional services" menu work drop edit the script at the top of the page as below (copy and paste)

  total_funeral = 1640 + Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_76922)) + Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_00000)) + Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_76924)) + Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_76926)) +.

  (Number (document.catwebformform22057.CAT_Custom_76927.value)) + ((document.catwebformform22057.CAT_Custom_00010.value) Number) + Number (GetSelectedItem (document.catwebformform22057.CAT_Custom_76926))

• Why a feature of CFLOCK does not seem like a bug?

  
  I searched this forum for discussions about cflock
  and read the livedocs at http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=sharedVars_20.html.
  This reading is above me, thinking that I already knew
  all about using the cflock tag.
  
  Apparently, I'm not a very critical situation
  the appearance of the tag cflock when the scope of the session locking.
  
  My question is about a user, a single session, multiple
  and the simultaneous requests coming to the CF8 server
  the same session of the user.
  
  Sense, a web page that uses ajax, frameworks, pop-ups,
  or the user by pressing ctrl-n-va generate several
  requests to the server CF8 using the same session.
  
  Based on my understanding, using type = "exclusive will."
  effectively single-threaded access to the code between
  the label. So my question is:
  
  
  Why < cflock scope = "session" type = 'exclusive'... >
  single-threaded access to the code between the cflock
  Tag?
  
  
  If you are nice enough to answer, I would really
  explain why the current behavior
  in CF8 is the most correct behavior. If the scope
  past of the session of the application or server, it
  will be infact single-threaded execution access.
  Then why is it not the case when the scope is session?
  
  I came to this problem because I was trying
  to explain to someone the difference between:
  
  < cflock scope = "session" type = 'exclusive'... >
  and
  < cflock scope = "session" type = "readOnly"... >
  
  
  Based on my test simple and what I see, I discovered
  I don't know the difference!
  
  
  I know how to re - write the code to perform exactly
  what I want to do. I can't seem to wrap
  my head around why the cflock tag is implemented
  in this way (in which case the session and exclusivity).
  
  However, it is more likely that I have a bug in my
  simple test... code?
  
  If you are interested, here's the code I used to
  confirm/test my hypothesis:
  
  
  Thanks for reading this post to the end!
  

  Thank you all to consider this topic.

  Unfortunately the answer was because of my bad code.

  Tip and the Azadi persistence paid off.

  The question was NOT because of my tag
  having the REQUIRED 'NAME' attribute

  I have observed the behavior desired by
  just change my new code sample to include
  the name in my tag attribute.

  Thanks again to everyone who gave this post
  in-depth reflection.

  Moreover, in CF5, the name attribute is a required
  attribute. Post CF5 it is optional. After having
  through six different environments with six different
  configurations, I found a CD CF5 and installed.

  After removing the code java-ish, I quickly
  an error message indicating that the name attribute is a required
  attribute... Ouch.

  Perhaps one of the Adobe ColdFusion team
  can make a change that if the validator tag seen
  This line of code...

  the validator tag will throw an error indicating that
  the NAME attribute is missing.

  Maybe I titled this section as:

  Why a cfapplication feature does not seem like a bug?
  When sessionmanagement = true and the name of the attribute is missing