I'm looking for 'best practices' tips for a configuration of a project (first CS5.5, Windows 7 Pro)

I was instructed to update an old corporate video with narration, sounds, graphics and new music.

Video camera ONLY material that I've had a DVD corporate (NTSC) - the original source material is simply not available. .

I can rip the DVD in MPEG 2 and import it into first without problem, but I would like to be able to use resolutions higher the updated graphics.

I intend to export it to Youtube (HD) but can export to DVD or BluRay as well.

My question really reduced management of sequences.   I tell myself that my sequence settings must be the highest resolution, I expect to work with (Youtube HD or Bluray) which allows you to easily export to lower quality, but I don't really know if it's as simple as that.  Is there a standard method in the industry?  Am I close?

First may actually use the DVD .vob files, just copy DVDs to hard disk, and then import in first.

What is the DVD existing video in a 4:3 or 16:9 format? If 4:3, think about how you will work in a program of 16:9. Rather than having the black terminal on the side bars, many publishers will some sort of background to fill this space. A popular solution is to reproduce a bass track, stretch 4:3 video to fill the screen and add Gaussian blur effects. Because the colors/content of the sidebars will correspond to the main video, it's a little disguises the fact that the video is 4:3.

If you put SD images in a HD program, it will look 'soft' compared to the HD images. As a compromise, you can consider the new edition as 720 p instead of 1080 p program, so that the SD resolution is not to be tense. All the computer video/video YouTube is not interlaced, meaning to sequences and exports should be done as Progressive.

Flow problem of potential work - if you take the images existing SD from the DVD and it high end in a HD sequence, then export to DVD (SD resolution), the video turned into mush. She was raised, and then again once, dowscaled really kill the quality. May be required to copy the HD sequence in a sequence of SD, difficulty of the problems of size / scale of graphics and titles and DVD for the export of the sequence of SD to avoid the top of range/reduce images SD. Note that the DVD-video is highly compressed, so you already work with a weak source material, recompress again will be a hit in quality in all cases, but certainly avoid the top of range/cut again.

I don't have Adobe apps in front of me at the moment, but I think that Blu - ray 720 p export options are limited, perhaps 720 p at 59.94 only, not sure. Which may affect your decision to 1080 p and 720 p.

Hope these tips help you

Thank you

Jeff Pulera

Safe Harbor computers

Tags: Premiere

Similar Questions

  • I am looking for a switch 2 x 1 printer compatible with windows 7

    I am looking for a switch 2 x 1 printer compatible with windows 7 or drivers for Belkin F1U201 I

    You could try to install Vista (32 bit only) driver in compatibility mode and see if it will work:
    http://en-us-support.Belkin.com/app/answers/detail/A_ID/2569/~/f1u201---2x1-USB-peripheral-switch---driver

    Depending on your current configuration, it may be easier in the long run to buy a wireless printer and share (if your PC supports wireless). Or buy a router that supports USB devices such as this one:
    http://www.Amazon.com/GP/product/B00387G6R8/ref=s9_simh_gw_p147_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=Center-2&pf_rd_r=0RE9YC0G15RM1KP1S3FZ&pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846

    In this way, you can use wifi and UTP to connect computers and printers.

    SC Tom

  • I'm looking for comments about the advantages and disadvantages of vs Windows 2000 Windows Server 2008.

    Hello

    My company uses Windows 2000 Server for a job very very important. I want to convince them to upgrade the server to Windows Server 2008 operating system and they asked me to give them some reasons, so I want to know Windows 2000 Security and performance issues and the benefits of Windows 2008 in detail to carry out the task. Please tell me where I can find this information. ? Thank you
    original title: Windows 2000 VS Windows 2008

    Please repost your request in one of the s in Forum Windows Serverappropriate, thank you!

  • you are looking for a solution to why my lap top running windows xp running slowly vary

    wanted to update microsoft and he replyed.  I hope you can help

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Hi Alby,

    1. who is the antivirus installed on the computer program?

    2 have you installed new hardware or software before the show?

    It seems that Windows update does not work and need to improve the performance of the computer. We will analyze and identify the cause of the problem.

    Method 1:

    I suggest you run the Fixit from the link below and.

    Step 1: Fix the problem with Microsoft Windows Update is not working:

    http://support.Microsoft.com/mats/windows_update/

    Step 2: Also run the FixitWindows system performance.

    Reference:

    Difficulty of Windows system performance slow computer problems

    http://support.Microsoft.com/mats/slow_windows_performance

    Method 2:

    Perform the steps described in the article:

    You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

    http://support.Microsoft.com/kb/883614

    See also:

    Optimize your computer for peak performance

    http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=MZFHXJpbs19

    Hope this information helps. Response with status so that we can help you.

  • I'm looking for web premium CS2 with cs4 and cs5 update sources. CD has been lost, but I have all the license keys

    I'm working on CS5 web premium.

    I've updated a web creation CS2 to cs4 and cs5 premium. I want to uninstall my suite for a new installation on the new computer, but the CD was lost on the road. Where can I download the sources? I have all my keys to license, no problem with that.

    Thanks a lot for your help.

    Thomas

    Download the CS4 products

    Download the CS5 products

    CS2 product activation has been abandoned, but you can use your old serial number as a serial number eligible for CS4.

    You are entitled to replacements for CS2, but do not use the upgraded replacement for CS4 serial numbers, I don't think they will work.

    The CS/CS2 activation servers have been removed. Download CS2 and use the new number given to the right of the download link.

    ml https://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.HT

  • Looking for recommendation on a prefabricated computers run CS5.5

    I'm upgrading to CS5.5 (plan to use the two Premiere Pro and After Effects) in the future immediate and thought it would be a good excuse to upgrade my equipment 5 years as well.

    I don't have the time/energy/experience to deal with my own system, it would be better to buy a prefabricated building system, but I can't decide on what to buy.  Of course, I know the official list of the system requirements published by Adobe, but I expect specific recommendations of a system who really understands working with CS.  I stumbled across the Protus of Digital Storm (who precisely, announces that it is "optimized for CS5"), but the base price of $3,500 was a little more than I had planned to spend.

    Would appreciate any ideas or suggestions!

    Thank you!

    Try http://www.adkvideoediting.com/

    Digital Storm has only old technology (i7-990 / X 58) at full price. Way overpriced for such a system of old.

  • Looking for table 1, D with the first occurrence

    All,

    I am developing a Subvi that loads into the address book of MS Outlook in a multicolumn Listbox. There are hundreds of names in the address book, so I would use a feature when a user starts and then typing a name, it will take the user to the specific record in the listbox control. I want to start at the beginning of the field name, but I'm having a hard time. I would like some advice.

    Thank you

    Eric


  • Looking for sample configuration (failed authorization of the order)

    I have problems Ganymede + work properly with ACS5.1 and a switch simple catalyst 3750.

    I can authenticate with AAA, but I can't get a single command to work once I am 'failed command authorization"even on"enable ".

    Can someone point me to a resource that will guide me in the process?

    Thank you

    You probably have permission to order enabled on your switch and access the GBA policy is not allowed commands. A way around this is to disable permission to command on the device or allow all the commands in your command under your access policy sets.

    Check these settings and do not forget that the 'customize' command will help activate the rules or the permissions if you have trouble finding them.

    Here is the guide of the user to ACS 5.2 - http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

    Thank you

    Tarik

  • #for activation ringing unanswered, I am unable to activate windows xp pro.

    I had to reinstall windows because of a new motherboard, but the computer I use is not web connected, so I'll have to activate by phone.

    I had to reinstall windows because of a new motherboard, but the computer I use is not web connected, so I'll have to activate by phone.

    Which country are you?
    Look here for alternative phone numbers (they are for Volume Activation, but will help you)
     

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • I need USB Controller drivers for my HP Pavilion g6 2235ca computer laptop running Windows 7 Pro 64 bit?

    Thus, it was at least a couple of months that I use my laptop with a single working USB port.

    The other two do NOT work. If I go to the computer in the start menu, make a right click on computer, and then click Manage, then I go to the Device Manager, there is a yellow exclamation next to the (USB) Universal Serial Bus controller.

    When I try to update, Windows 7 tells me that an update is not found blah blah blah...

    This problem has happened since I installed Windows 7 64-bit on 64-bit Windows 8.

    So, can anyone help me find the drivers for the USB controller? Or is it some sort of hardware failure or problem?

    Help, please? Any who...!

    Thank you!

    Hello

    Try to install the driver USB 3.0 on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

    Kind regards

    DP - K

  • Errors when trying to install new programs, one is SoftsonicDownloader for CCleaner (registry cleaner) also Microsoft security essentials in windows XP pro

    Error signature
    AppName: SoftSonicdownloader App Ver: 0.0.0.0 ModName: SoftsonicDownloader_for_ccleaner
    ModVer:0.0.0.0 Offset: 0002164e

    Details of the declaration
    This error report includes: information regarding the State of SoftsonicDownloader when the problem occurred; the operating system version and computer hardware used; your digital product ID, which could be used to identify your license; and address of Internet Protocol (IP of your computer).

    We do not intentionally files, collect name, address, email address or any other form of personally identifiable information. However the error report could contain information specific to the customer such as data from other files.  While this information could potentially be used to determine your identity, if any, it should be used.

    The data we collect will be used only to fix the problem.  If more information is available, we will tell you when you report the problem.  This error report will be sent using a sevure to connect to a database with limited access and will not be used for commercial purposes.

    Here you can download free CCleaner: http://www.piriform.com/ccleaner/download/standard ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Best practices for setting up projects

    Hi people.

    I'm looking for some advice on my project management and the Installer files.

    So I have a VI with outbuildings and void / VI. I then add to a project, and then create the application and setup of files when I want to deploy the program. If I discover a bug or need to make a change when it was deployed I proceed as follows: remove the project, the application and Installer. I make the required changes to the VI and then add a new project and create the application files and the program installation, and then re - install the program.

    It's a little bit of your time. Is there a way to make changes to the VI which can then automatically update the application files and the Setup.

    Thank you

    Select this option.

    What? What you are doing seems crazy to me! Don't worry though - there's a better way! Have your files/code in a project and just re - build the executable/installer once you have updated your screws... it will automatically use the last screw, when you create the executable file. You can define the specification of generation to automatically increment the version build number.

    You only need to create project/generation specifications (exe/installer) once!

    If you want to keep track of different versions of the code, use a sort of like Subversion/Git source code control, etc.

    I suggest you have a read here (and some related articles!) to learn more about the projects and build specifications in LabVIEW! http://www.NI.com/white-paper/7197/en/

  • Satellite P35-6112 - looking for a recovery disc

    Hello

    I am looking for a Toshiba Satellite P35-6112 recovery disk, my windows is completely out and can't go on or return to best Configuration safe mode... The laptop is 4 years old and the Toshiba recovery media does not include any drive for this laptop...

    Please let me know if you have one, or where can I get a new one.

    Concerning

    Gerald Desmons

    Hello

    AFAIK the Satellite P35 belongs to the American market and therefore, you should contact the nearest authorized service provider. Maybe guys can order a new disc of recovery for you:
    http://www.CSD.Toshiba.com > locate a repair center

    An alternative you can install Windows on a normal disc of Microsoft. All the drivers, you can download from the Toshiba page. :)

  • MCE is looking for TV tuner, but nothing happens.

    Looking for MCE tv tuner.

    My mce in windows 7 says it's looking for my tv tuner, that it keep your stay with this photo - if nothing happens.

    Normally I have no problem to see TV with MCE.

    Can say that I also installed Cyberlink Power Cinema 6 and this application works very well and find a TV tuner.

    What can I do to solve the problem?

    The last time it happened, I reinstalled windows 7, but there must be an easier solution, I hope.

    Greetings from Erling

    oz1eee

    I found my own solution :-)

    I'll give here, but my windows 7 is in Danish, I hope to translate it so it can be heard.

    Problem: Windows Media Center cannot find no matter what TV tuner once I used an other application (Cyberlink Power Cinema 6).

    Solution:

    1. go in Control Panel.

    2. in the context of programs - klick on "remove a program.

    3. in this window - upper-left corner - you will find "turn windows features on or off" - klik on this message.

    4. find the map "Support functions" and open it with the sign +.

    5. remove the 'hack' in 'Windows Media Center' and click OK.

    6. wait to restart the computer.

    7. after the restart - do the same things, but this time you need to place a 'hack' again in Windows Media Center and click OK.

    8. after that, you can start Windows Media Center and after a short message "searching for tuners"-you have an image a TV tuner.

    Voila!

    Best looks fra Erling, OZ1EEE

  • Satellite U500 (PSU9ME) - I am looking for the display Windows 7 driver

    I'm looking for the U500 PSU9ME video card driver. My Windows 7 32-bit operating system

    Please help me...

    Hello

    Have you checked the Web from Toshiba site?
    I don't think because there, you can download it: ;)

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    Laptop-online Satellite > Satellite U series > Satellite U500

    Check this box!

Maybe you are looking for