I'm new: beginners: tutorials: need more help: thanks :)

Similar Questions

• New without the need of help/advice

  Hello everyone

  I am new to use without. We are a small company and our budget COMPUTER is almost nonexisant. I bought a PS500XV from a seller on Ebay with the intention to integrate in one of our servers in VMware ESXi 5.1. In it, I received a box with cables of power, a RS-232 cable and rails... NO software, NO manual, NOTHING not to mention when I sent the seller (which resembles a TON of Dell sale without) was quite short and said that they did not provide a service to the customer... all, I asked to was a little direction...

  So I'm here now looking for advice. There seems to be precious little on the page of Dell support for the product. It seems that when these aircraft are delivered, they understand the management / configuration software and I guess some sort of manual... I have NOTHING.

  Please is - anyone can help me and at least point me in the right direction. I carried on a keyboard, searching the Internet looking for info... nothing helps.

  Thanks in advance or a person everyone's help!

  Phil

  Hello

  You don't require any special software to manage the table, other than a browser.

  Unfortunately, you don't have a contract support, or guarantee, so you can't get a support account.  Allows you access to the documents, and related software.   The license to use the firmware comes with the contract warranty or support, not in the HW himself.

  All models of table work the same in regards to installation and operation.  Different controllers of discs, number of network adapters, cache will be different, but the software will not.

  It may still be possible to get the order table so that you can put under contract.  However, the 5000 series will end of life August 2014.  No support will be possible after that.  Some vendors sell these paintings with spare disks that would prevent you to get a support contract.

  Basic configuration.  The easiest option is to connect to the serial port, 9600, n, 8, 1 No. Flowcontrol. (Not HW and SW, AKA Xon/Xoff

  Press enter, you should get a login: prompt.   Enter with password grpadmin grpadmin.

  It should prompt allows you to configure the array.  You must select what interface.  (ETH0 is by default), then a record IP address for the port.  Then you enter a member name, which is unique to each Member of a group.  Then you enter a GroupName.  Whether the Group would be EQL - SAN, the name of the Member could be EQL-SAN-member1.  Then, you provide a group IP address (that corresponds to the address management and discovery).   You get so prompt to create the group.

  You will then get prompted for a password and an administrator password.

  Once created, you'll be a GrpName > prompt.

  You can now use the Web GUI, make sure you have Java installed, and point the browser to the IP address of the group.

  It manuals are online also.  I.e. psonlinehelp.equallogic.com/.../configuring_an_array_and_creating_a_group.htm

  There are also many other useful links, which you can find through a search engine.

  www.confignotes.com/.../Dell-EqualLogic-CLI-configuration

  Once you get logged in, you will be able to configure the RAIDset.   Suggest to not use RAID5.  He is more vulnerable.  RAID6 might be the best solution.  So be sure to select the name of the Member-> Network tab and configure the other network ports.

  Finally, make sure that you both modules control cable.

  Kind regards

• new to cs3 need much help

  If intern im thrown into cs3, simply because I know how to use photoshop and no one else does. Yay stuff only I know, this is what ive understood on my own using the videos help and lynda.com... so I need a lot of help

  THE PROBLEM: need to design a catalog for books

  1. the client must be able to enter something in a search box and come up with results by title, author, or partial title/author

  2. results should be the links to the individual book pages

  3. they must also be able to click on a box next to books in their results for 'add to order/basket/shelf/whatever we decide to call the order page.

  4. the page should be built as a model if the interns who follow my work and add content quickly and easily. the content must also be updated we publish and add new books to the catalog (im assuming it would be a recurring task in the region?)

  5. If you do not type anything in the search, they need power click on the links to organize books in alphabetical order, by title or author in a large list of giant

  Thank you very much to all those who have ideas that can help!

  ~ ajbintern

  My suggestion to you: do not reinvent the wheel.  There are many applications showcase that you can install that will do all this for you.  All you need to know at this point is the server model.

  What type of database? MySQL, ms sql, etc.

  What language aside server, you can use the server? PHP, asp, etc.

• I can't get more than 3 "To" fields and need more - help!

  If I want to send an email I get only 3 "to:" fields before entering the title field. Because I can not type in more than one name in each field, how can I send the email recipients a dozen (without going through the address book for each of them, which seems a very tedious way to do)?
  I am a new user of Thunderbird, so forgive me if this is a stupid question, but I can't find the answer in the FAQ.

  Press ENTER after you have entered the third e-mail address.

• Need Calendar Help blackBerry smartphones

  Hi, I am new to BB and need help with the calendar.  Do not have microsoft outlook, I would like to be able to sync a calendar of office with my BB 8330.  The research I found indicates that BB will only synchronize with outlook, lotus, and? something else.  Is this true?  I have to just bite the bullet and download outlook?  I have windows vista with the following microsoft office 2007 and it came with microsoft office oneNote.  Anyone who is familiar with that?  Know if that can be synchronized with my BB from oneNote to synchronize with outlook?  Thanks for your understanding!

  Jamie

  Hi and welcome to the forums,

  There is a link to Goggle calendar that syncs with Outlook 2007.

  Then you just add Google mobile sync to your BB and it should be good

  For Google Calendar:

  http://www.Google.com/support/calendar/bin/answer.py?answer=98565

  Google mobile sync:

  http://www.Google.com/support/calendar/bin/answer.py?answer=65923&CBid=jh20naie3c9k&src=CB&Lev=answe...

  Please let me know if you need more help.

  Thank you

• I NEED YOUR HELP PLEASE! GOT 4540 s computer laptop HP ProBook. l + windows 7-pro, I am burning MUSIC ON DISK A C. Dr. OF WINDOWS MEDIA PLAYER,"+

  REPEATED YEAR ERROR A RED X and pointing to the prob-the source is when I played ' cv.d. + when I chose to open dectsron files wth either W "S MEDIAM PLAYER, INTERNET EXPLORER, or WITH A DIFFERENT PLAYER 'CLASSIC', I THINK! "SO, WHEN THE ASSISTANCE OF W / CLICKING ON. MEDIA PLAYER "-AN ERROR REPEATEA"
  DLY? -J' USES THE LATEST VERSION OF MOZILLA FIREFOX as MY WEB BROWSER... LALSO WHEN IVE DOWNLOADED MUSIC FROM 'YOUTUBE' IN YO A PLAYLIST IN THE LIBRARY, TURN OFF LAPTOP + BACK TO FINISH BUT 'PROPERTIES' ALONG ALL THE TRACKS DISAPPEARED + ' WAS A 'WASTE OF TIME "!" YES A GOOD PER. S WIDE, DO YOU KNOW WHAT I HAVE WAY? ISN'T ENOUGH HOURS WITHOUT THIS "APPENING"! ". ANY ONE OUT THERE WHO THINKS THEY CAN AVE a CE would BE "APPRECIATED:, WITHOUT END, I look FORWARD WITH HOPE, Justin,

  Hello Justin,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the exact error message when you say: "YEAR ERROR REPEATEADLY?

  Thank you for details on the issue.

  This problem may occur because of the incorrect or damaged Windows media player settings.

  I suggest you run Windows media player convenience store settings and check.
  Reference:
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  This utility checks the configuration and network for Windows Media Player settings to make sure you can read the content that you have downloaded and saved on your computer, or content streaming over a network or the

  Internet.

  Please also read this article and check.
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/burn-CD-DVD-Media-Player#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Need examples and a reference link of combat in the setting of the project, videos and tutorials did not help me much more information

  Need examples and a reference link of combat in the setting of the project, videos and tutorials did not help me much more information.

  Can you tell me or explain myself better. I'm new to using this new trial of DPS

  Thank you

  The option "Link reference" in the project settings can possibly be used for a link to an application from outside of the app, but it is currently not supported. You can learn more about this option and other parameters of the project here: Digital Publishing Solution help | Create projects

  If you are looking for ways to create links to other articles, see the following: hyperlinks in 2015 of DPS.

  Let us know if you have any other questions.

  -Bob

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.

• I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  But you have the latest version of iTunes on your computer?

• My screen is very bright. I need more contrast. How to adjust the brightness contrast restoration d. help, please.

  My screen is very bright. I need more contrast. How to adjust the brightness contrast restoration d. help, please.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/adjust-your-monitors-brightness-and-contrast

  Adjust the brightness and contrast of your monitor

  You can adjust the brightness and contrast of your monitor to improve the readability of the text and making digital pictures appear more like they look when they are printed.

  See you soon.

  Mick Murphy - Microsoft partner

• New cascade, I need help getting started to learn

  Hi all

  I'm new to Cascade, so confusing to start.  I have a question that needs your help to clarify:

  1. I create a control in QML Editor, because of the ease to make and listen to samples, give the id to it. So how do the handle in C++ code?

  2. are there any resource tutorial for some basic needs, such as: collect the text box data, display data, etc...

  There are a lot of samples, but I need an explanation of principle so that I can get contact with the sample easier.

  Enjoy your share!

  1. https://developer.blackberry.com/cascades/documentation/dev/integrating_cpp_qml/index.html

  2. https://developer.blackberry.com/cascades/documentation/dev/javascript/index.html

• lost the serial number for my ADOBE CS5 product and need to install it on a new machine. Can someone help me?

  lost the serial number for my ADOBE CS5 product and need to install it on a new machine. Can someone help me?

  Hi Hectorc96414045,

  Please refer to find the serial number of your product Adobe quickly

  Visit also Download Adobe Creative Suite 5 products

  Please let us know if it helps.

  Kind regards

  Shelly

• Hello, I have a new Mac, I need help to install adobe photoshop c6 I need to install and pay fees I want. but I've been trying and get no days... I had the version of 30 days and will not let me buy him. I NEED FOR MY WORK PLEASE

  Hello, I have a new mac, I need help in installing adobe photoshop cs6, I need to install and to pay the tax. But I've been trying and don't get days, I got 30 days version and will not let me buy it. I need it to work. Please

  Hi the isac,

  You can download Photoshop CS6 from this link: download Creative Suite 6 applications

  You can buy the product from this link: Creative Suite 6

  Kind regards

  Claes

• I just got a new computer and need to download my products and they are produced of cloud, can you find it for me and help me to download again

  my email address is [private information removed by Moderator]. My old computer broke, I got a new and I need to download everything I have, but I have no documentation

  You can download your applications https://helpx.adobe.com/creative-cloud/help/download-install-app.html CC

  If you need help with it ("all I have"): Contact Customer Services.

• I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  Argh it's frustrating! I never noticed that the key was not working in InDesign.

  A bit of research and it turns out that the MS Office has this as an option in their software. But I can't find an option in the InDesign preferences to make it work.

  However, somethings do not appear in the shortcuts and preferences and are hidden triggers in InDesign that are accessible via a script.

  I'm not saying that it is possible to activate the button insert by using a script, but it is plausible that he can be activated.

  Maybe ask on the forum script? Scripting InDesign

  I know that this may be a possibility as with InDesign prior to export PDF documents interactive versions, there was previously no way to export PDFs interactive as unique pages if the gaps of.

  But the option to toggle this setting was scriptable.