I'm new to flash

Similar Questions

• I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges to add this item.

  How do we change privalages

  I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?

  Hello Victor,.

  Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• Support for new NAND flash

  Hi all

  As you know, according to the version of the TC TC5.1.4 software, all the codecs of series C/MX/SX/EX newly built have new NAND Flash.

  If some specified software must be applied to them.

  'Series C' means "C20, C40, C60, C90", is this correct?

  It feels strange to me that Quickset has same flash memory with codecs for Integrator as C90.

  Best regards

  Kotaro Hashimoto

  This applies to the C20, C40, C60, C90, EX60, EX90, MX200, MX300 and SX20.

  So yes, you are correct that C-series Endpoint is C20, C40 and C60 C90, but please note this profile include with these endpoint of series C and system.

• New to Flash Pro: images and scenes to help!

  Hello! I'm new to Flash Pro and I am currently doing a platform game simple game for a school project.

  I have already created the game, but at this stage just want to add a title menu or a preloader. The problem is, I don't know where to start. I know how to make the menu real and preloader, but just different States in the game seems a bit difficult (one for the preloader, which launches the start menu, which then runs the script of a game), and I have not found online tutorials about it (maybe because it's simple..?). Anyway, how can I create these 'States' for the menu / game / preloader? As I said, I'm new to Flash Pro, I use images, scenes or just a code? Im sorry if this is confusing, I'm still learning the jargon flash

  -Thanks for your time!

  You can insert a new empty keyframes (right click on frame 1 of your main timeline).  Add a stop() in Control Panel actions of your Framework 1 and add your title menu on the stage.  Add a button that will execute nextFrame() to move towards your previous image of the first (and now 2nd).

• Brand new to Flash and get into trouble

  I work through a tutorial that I found to do a flash MP3 player.  I have problems with the volume controls.

  Line 20 is the problem, and the compiler gives undefined ownership 1120 error for s_Transform.  I'm pretty sure it's a very simple question, but I'm new to Flash in general.  I'd appreciate any help!  Thank you!

  Here is the code:

  import flash.events.MouseEvent;
  import flash.media.Sound;
  import flash.net.URLRequest;
  import flash.media.SoundChannel;
  import flash.media.SoundTransform;
  import fl.events.SliderEvent;
  
       var myMusic: Sound = new Sound();
       var soundFile: URLRequest = new URLRequest("1.mp3");
       var channel: SoundChannel = new SoundChannel();
       var s_Transform: SoundTransform = new SoundTransform();
  
  btn_play.addEventListener(MouseEvent.CLICK, playMusic);
  btn_stop.addEventListener(MouseEvent.CLICK, stopMusic);
  sld_volume.addEventListener(SliderEvent.CHANGE, changeVolume);
  
  
  function changeVolume(evt:SliderEvent):void
  {
       s_Tranform.volume = sld_volume.value;
  **this is line #20, the problem line**     channel.soundTransform = s_Transform;
  }
  
  function stopMusic(evt:MouseEvent):void
  {
       channel.stop();
  }
  
  function playMusic(evt:MouseEvent):void
  {
       myMusic.load(soundFile);
       channel = myMusic.play();
  }

  Problem, it is a typo.  Check your spelling on this line and the line of input.

• New to Flash CS4... How to remove a keyframe?

  I'm new to Flash and have two questions that I can't find an answer to in one of my books or online tuts.

  #1 I created a motion tween for my chart.  I have 10 keyframes in total, but went in I had 1 too.  I would delete it but when I go to the drop down menu to delete... I can only delete all the.  Or... what happens if I want to delete a keyframe in the middle of my trajectory?

  #2.  I have a keyframe in the same path and I would like to move elsewhere as scheduled.  When try Alt + click and drag... it moves the entire timeline.  I wonder if there is a way to do it.  I might miss, not here, what could be more advanced?

  Your help is appreciated.

  Hi Kate,.

  To move an image, Ctrl/Cmd - click and drag to a new location one. It won't drag the entire range.

  To delete all keyframes of property on a single image, select it (Ctrl/Cmd-click), right-click and choose Remove image > all (or one of the other options if you just want to delete an image key type. Remove executives also works for an individual frame like this also, but it removes the frame, not only delete the keyframe.

  New movement spans allow you flexibility animate independent properties, which explains why there is more to just delete the image of the additional options.

  You can also remove individual keyframes of properties in the query editor.

  Hope that helps.

• new to flash animation

  Hi guys am new to flash n working on a small project of conversion of text in a graphic object.however after that and create my interpolations. I want to start to animate it.however when I try to use the effect controls panel in the Properties Inspector, his deactivated.what you think I should do to get active.i am tryin out the hillman project curtis shockzone using flash 8 macromedia please help.coz I want to learn: confused;

  Thanks a lot for your help. I virtually learned how to create tweens and liven things up easily with flash 8. Thanks for your help and advice

• brand new wx350 flash does not work.

  I know how to put flash, but in the habit of work.

  Hello, vinniefono!

  I'm sorry to hear about it!

  Have you tried the steps in the following link?

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/43072/p/40096, 40097,40555, 92430/c/65,66/kw/built-i...

  If you have tried all the steps, and the flash still does not work, you can try to reset the camera. Steps on how to reset the camera are provided in the link below:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39713

  If you have tried all the steps and you have reset the camera and the flash still does not work, your new Sony camera may be defective and requires service.

  But because the machine is new, it is still under warranty! So, I think that Sony will replace the camera with a new one for you, or fix it for you, if it is indeed defective! (most Sony products come with a standard warranty of one year)

  Sorry for the inconvenience!

  Best regards

• When you plug a new TDK Flash memory card, a message appeared not formatted how do it please

  I'm doing several copies of family photos on different new TDK SD Flash

  Memory cards. 2GBs, the message"not formatted" is displayed even though several photos have already been copied from my computer to the card.

  Hello

  You may need to install the hotfix on the computer, check out the link below: error message when you try to access an SD card on a Windows XP computer that has a particular combination of SD host controller and SD card: "the disk in drive is not formatted": http://support.microsoft.com/kb/970685

• "I'm trying to download the new adobe flash player my computer wondering what whenever when am to see any new vedeo__on tube or anywhere"

  If ever I would restore my previous settings it works then return as ask I install the new flash player from adobe on a lost again.am as to what needs to be done. Thank you

  There are many possible problems. Go to http://kb2.adobe.com/cps/191/tn_19166.html for a long list of potential problems and steps to check for them and correct them.

• Gel T60 new BIOs Flash

  T60 running win xp pro. I downloaded the upgrade of the thinkvantage system and he ran. It froze on "Flash new BIOs". What now?

  I did a hard stop down and it was OK from there. So problem solved apparently.

• New CC Flash & HTML canvas errors

  Hi, I just upgraded to Flash CC but I have questions that I think are simple new user errors. My problem is when I create a new canvas HTLM5 and copy images in the library. 1 a background image and a tree. Both were originally png cut and pasted through Fireworks.

  So I put the background on the new document and publish everything works fine a static image is displayed

  Then I put the (static) tree on the bottom in a new layer or on the same layer can publish and white canvas is displayed.

  When I publish, I get the following warning is displayed on the output tab

  WARNINGS:

  * 2 Bitmaps packed with success in 1 spritesheet (s).

  Safari reports TypeError: undefined is not an object (evaluation of "this.spriteSheet.getNumFrames")

  IE 11 reports

  HTML1300: Navigation has occurred.

  test.html

  HTML1202: file://mac/Home/Desktop/untitled%20folder%205/test.html is running in compatibility mode, because "Display intranet sites in compatibility view" is checked.

  test.html

  DOM7011: the code on this page off backward and forward caching. For more information, see: http://go.microsoft.com/fwlink/?LinkID=291337

  test.html

  [object Error]

  {

  Description: "object does not support property or method 'defineProperties ', '.

  message: "object does not support property or method 'defineProperties ', '.

  name: 'Type ',.

  Number :-2146827850

  }

  [object Error]

  {

  Description: "object does not support property or method 'defineProperties ', '.

  message: "object does not support property or method 'defineProperties ', '.

  name: 'Type ',.

  Number :-2146827850

  }

  SCRIPT445: Object doesn't support this action

  Untitled - 3.js (20.1)

  SCRIPT445: Object doesn't support this action

  test.html (21.2)

  The only post I found indicated that running the files locally on the desktop computer rather the a web server may cause this error.

  I use an iMac with safari and IE11 (running in Parallels)

  No indication on my simple mistake would be appreciated

  When you have made a test movie, did the images appear ok? It is normal when you use spritesheets so it fails if you try to open the HTML document locally. If you've seen ok with a test film images, so it should all work when the files are on a server.

  You can go into the publication settings and disable the spritesheet option. Then, the HTML code should work as a local test.

• Can you make stick figure animations? I'm new to Flash. Help, please.

  I'm new. I just Flash Professional CC and I would like to know that you can make animations of stick as in Flash CS3 Professional. I've seen people do it on Youtube.

  Yes.

• New to Flash, need help.

  I'm new in the world of Adobe Flash and who need help. I have a banner rotator fla file is an xml file to produce the content. My question: How can I rename the file "config.xml" in "BannerConfig.xml" xml and still have it work with the flv file?

  We need a code in the FLA somewhere that specifies the name of the file to edit.  The code must be on the time line of the (or a).  If you see a frame (or frames) in the calendar that has a lowercase 'a' in this document, select this image and open the Actions window to view the code.  It is always possible that the code inside a movieclip as well.  And if the file uses AS2, it could even be attached to a symbol on the stage, in which case you will need to select the symbol on the stage, while the Actions panel is open to see the code.

• Isn't new incompatible Flash with Gmail and YouTube?

  I installed the beta Master CS 5 today and noticed two confusing differences in my computer. (In addition to requiring more than 15 GB of hard drive!)

  First - Advanced features document attachment in Gmail and the ability of see the progress bars when you attach files to messages and attach several files at once to a message from Gmail, has stopped working. I have a white box where the link "attach a file" used to be. Gmail, this feature requires Flash. Once I returned to the base feature (and turned off the features of Flash-person in charge), I was able to attach files again.

  Second - all the videos of YouTube, no matter where I link to them, now appear as just a vibrant pink box full of big pixels. Sound works but the video is scrambled pink squares that move erratically.

  Does anyone know if its Flash or another part of the new Creative Suite 5 master which is not playing well with the YouTube video?

  VLC and QuickTime still work OK.

  Mac OSX 10.6.3 on old iMac 2.8 GHz Intel Core 2 Duo.

  Binky4Binky

  If your query is resolved then close this thread