I want to increase the size of the image icons in the palette to open the file, see them much

Similar Questions

• I want to increase the memory on the 2210CDS Satellite

  I have an old Toshiba Satellite 2210CDS/6.0 I want to give to charity. Until I do, I wanted to increase the memory from 64 MB to 128 MB minimum, because he seems excessive paging of memory under Windows 98, it slows down a lot too.

  The original 64 MB memory module is marked PC100-222-62, Toshiba p/n THLY6480H1FG-80. I ordered since equivalent barrettes memory 128 MB (PC100-222-620) from different sources. They fit well, but the memory is still limited to 64 MB, as evidenced by the page to configure the BIOS and Windows pages 'system '.
  The computer has only one memory location. What I am doing wrong?

  Ruud Hartog

  Hello

  This laptop is very, very, very ;) old

  However, the laptop can be improved up to 160 MB. 64 MB internal memory + 128 MB additional memory module

  The Toshiba recommend using these modules:
  128 MB - PA3005U
  64 MB - PA3004U

  Usually after upgrading the BIOS should automatically recognize the module.

• I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  It will help in cases where the applications require more than 4 GB of RAM.  Otherwise, there will be no noticeable difference.  If you really want to increase the speed, an SSD is the best option.  They cost about 3 x's + more than a traditional HDD of same capacity...

  Ciao.

• I want to increase the performance of the PC using Readyboost

  Here are my stats to computer

  Windows vista home (32-bit) sp2
  Intel Pentium Dual CPU E2160 @ 1.80 Ghz
  2 GB of RAM
  now I want to increase the performance of the pc using readyboost
  How can I do
  also how can I get the max of readyboost performance
  is there a support for an external device?
  thnx in advance
  Original title: readyboost

  Hello

  'ram 2 GB'

  You have too much RAM for Readyboost work effectively.

  ReadyBoost is designed for machines that have between 500 MB - 1 GB RAM

  The physical RAM you have installed, less you will notice an improvement using Readyboost.

  This is a very good tutorial on how to configure Readyboost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• I want to increase the frequency with which my laptop computer's clock is set automatically by contacting an internet time server.

  I want to increase the frequency with which my laptop clock is set automatically by contacting an internet time server. In XP, there is a registry setting for the number of seconds between contacts with a time server. Where is this setting in Vista Home Premium 64-bit?

  Hello

  I'm in Seattle and generally use time of Microsoft servers

  This is a list of time - stratum servers 1 and 2 levels.

  A list of time servers Simple Network Time Protocol (SNTP) that are available on the Internet
  http://support.Microsoft.com/kb/262680

  World time server
  http://www.WorldTimeServer.com/

  World time server - Seattle (online)
  http://www.WorldTimeServer.com/current_time_in_US-WA.aspx?city=Seattle

  The State of Washington
  http://www.WorldTimeServer.com/current_time_in_US-WA.aspx

  The naval Observatory time
  http://www.usno.Navy.mil/USNO/time

  This list, the phone number for time to Naval Observatory, CO - + 1 719 567-6742 (Colorado Springs)
  and there is more information and links.
  http://Wapedia.mobi/en/United_States_Naval_Observatory

  Sorry, no info on the atomic clock at the phone number. Maybe try your favorite search engine.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "You sure you want to delete the file without moving it to the Recycle Bin? In response, 'No' causes the file to be left undone.

  Separated from this thread.

  I think the bug has something to do with the partitions created with TrueCrypt.

  Indeed. Make the truecrypt as removable disk volume in options of fixed the problem :)

  The suggestion did not work for me.

  I use Windows Home Premium and Truecrypt 7.1.

  When the volume is "removable", an attempt to delete causes the prompt, "do you really want to delete the file without moving to trash? In response, 'No' causes the file to be left undone.

  When the volume is not removable, an attempt to delete causes, command, the prompt "you want to move the file to the Recycle Bin?  I clicked 'Yes' the file disappeared from his record, but was not visible in the trash, even if the trash appears to have contained.  By clicking on "All content, restoring" the trash, has no effect.

  Basket of content used to be visible and restoration-able.  I recently opened some volumes on a drive not used for several months.  Other that that, I can't say why the trash behavior has changed recently.

  Suggestions appreciated.

  Thank you.

  Colin

  I suspect it has to do with the size of the 'file '.  When a file is larger than the preset size of trash, your options are to delete without moving to the trash.  No way that you do not want to delete it without moving it to the Recycle Bin, but if she's great that recycle it bin it cannot so it just happens.  If you say yes it removes without moving to recycle.

  You can change the size of your trash by right click > properties > change size

• I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• I would like a more efficient sorting for organizing files, a similar to the options available via EXCEL. I want to sort the files from Windows 7 Desktop AND type update...

  I would like to apply a more efficient to organize the display of files, a similar to the options available via EXCEL.  I want to sort the files of desktop Windows 7 by type AND update... looks like it would be a logical way to view the files.  Currently, I can do one or the other.  Sort by modified date provides a hodgepodge of file types, sort by type will not most recently changed... organize a hodgepodge of dates.  You wonder why I felt it necessary to ask this... seems to be a simple and logical option which would already be available.  Is it?  If so, how can we do this?

  I don't know where you see all sort in excel. The file > open in excel procedure uses this same kind as provided by the Explorer (its Explorer discovers Documents)

  The view in excel is obviously filtered to Excel docs.

  You probably need to rethink your documents folders stratergy

• The manager wants to block the file history. How can I block the storage of files

  The manager wants to block the file history. How can I block the storage of files

  Hi Jaeyoung,

  Please see the following article on network end Points for creative cloud.

  https://helpx.Adobe.com/content/dam/help/attachments/Creative_Cloud_for_enterprise_Service _Endpoints.pdf? wcmmode = disabled

  It has information about what how can you block applications and different services.

  I hope this helps.

  Kind regards

  Sumit Singh

• I don't want to save the file converted to the cloud. I WANT it on my PC.

  I don't want to save the file converted to cloud ther. I WANT it on my PC. I think that there is something wrong with my subscription. I paid fees six months from a year ago.

  Hi urs.boeschenstein,

  Files are automatically saved in your online account when you use Acrobat.com online services. However, you can probably download the files on your computer, by selecting to https://cloud.acrobat.com/filesand then by clicking on the download icon.

  Additional problems with your subscription?

  Best,

  Sara

• Why tell me that there is no email associated program when I don't want to send the file?

  If I double-click on a pdf file, Adobe Reader opens and displays the file, but then displays a message: "there are no associated messaging program to perform the requested action. "Install an e-mail program or, if such is already installed, create an association in the default programs control panel. I don't want to send the file, I just read.

  lorne6677 wrote:

  I have the same problem. When will this be fixed by adobe?

  I'm just open a file and I get this shit

  If you CLOSE the Panel sign/tools/comment (click on ALL positions to close), then close the drive. The NEXT TIME that you open the player, the panel will be closed by default and you shouldn't see any prompt to select a mail client.

• Dell virtual disk are larger. You want to increase the size of the data store.

  Hello

  I started the implementation of a server ESXi 5.5 Update 1 this week. I didn't know Dell shipped the server with two virtual disks instead of one. I realized this _apres_ that I had already created the data store and setup a few virtual machines to the breast. I called Dell who sent specific instructions to increase the removal of the second (empty) virtual disk and add it to the main. In the end, I increased the single VD from 2 TB to 3 TB and I want to give the remaining space in my store of data.

  I tried to follow the article here that explains how to do this via the CLI.

  Well, he did not altogether. Fortunately, I was able to recover my datastore my setting start and end sectors to their original numbers. But I'm still left with this almost 1 TB of space that I can not attribute to the data store. After that I reread storage adapters in the client, the new Dell disk size resulted under measurement devices. Click on "increase...". ", generates the following error which led me on the way to the CLI method:

  Call "HostDatastoreSystem.QueryAvailableDisksForVmfs" to object "ha-datastoresystem" on ESXi '[myservername]' failed.

  I will paste my notes that I took everything by jobs. Things have exploded the rails when I put 4 partition size to the largest size. Any help, please?

  ---

  I use that as a guide:

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2002461

  
  

  1 use start hardware device management tools to increase the capacity of additional disk to the device. For more information, commit your hardware provider.

  This has been done. The new size of the virtual disk is 2791,88 GB (TB 2,79188)

  
  

  2. open a console to the ESXi host.

  Pretty simple.

  
  

  3. get the DeviceID for the data store to change.

  ~ # vmkfstools Pei "/ vmfs/volumes/datastore1 / '.

  System file VMFS-5, 60 extending on 1 partition.

  File system label (if applicable): datastore1

  Mode: public

  Capacity 1971926859776 (blocks of files 1880576 * 1048576), 1042688245760 (994385 blocks) prevail, max size of the 69201586814976 file

  UUID: 534e5121 - 4450-19dc-f8bc1238e18a 260d

  Partitions split (on 'lvm'):

  NAA.6c81f660ef0d23001ad809071096d28a:4

  
  

  A couple of things to note:

  a. the device for Datastore1 ID is: naa.6c81f660ef0d23001ad809071096d28a

  b. the number of Partition on the disk is: 4 ' [...]: 4 "»

  c. the prefix, "naa," means "Network address authority" the number immediately after is a single logical unit number.

  4. Enter the amount of disk space available on the data store.

  ~ # df h

  Size of filesystem used available use % mounted on

  VMFS-5 1. 8T 865.4 G 971,1 G 47% / vmfs/volumes/datastore1

  
  

  5 team of the device identifier, to identify the existing partitions on the device by using the partedUtil command.

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 3865468766 251 0

  ~ #

  
  

  According to the table in article KB

  4 13711360 3865468766 251 0 - primary #4, type 251 = 0xFB = VMFS, 13711360-3865468766 areas

  | |        |          |   |

  | |        |          |   \---attribut

  | |        |          \---type

  | |        \---se finishing sector

  | \---a starting from sector

  partition \---Numero

  
  

  Also note how the number of section start the old end sector number is + 1.

  
  

  6 identify the partitions that need to be resized and the size of the space to use.

  We want to resize partition 4. I don't really understand the last part of this sentence, however. Read more.

  
  

  7 the number of sector end you want for the target data store VMFS partitions. To use all out at the end of the disc space, remove 1 of the size of the disk in the areas as described in step 5 in order to get the last usable area.

  ESXi 5.x has a command to do this:

  ~ # partedUtil getUsableSectors "/ vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a".

  1 5854986239

  This means that we want 4 Partition of "naa.6c81f660ef0d23001ad809071096d28a" to be:

  13711360 - 5854986239 (i.e. the end of the disc)

  
  

  8 resize the partition containing the target VMFS Datastore using the command partedUtil, specifying the original existing partition and the desired end sector:

  Using the above information, our command is:

  resize # partedUtil ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 5854986239

  
  

  9 step 8, the partedUtil command can report the warning:

  He did not. Displacement.

  
  

  10. the tables of partitions have been adjusted, but the VMFS data within the partition store is always the same size. Now there is an empty space in the partition where the VMFS data store can be grown.

  
  

  11 launch this v vmkfstools command to perform a refresh for VMFS volumes.

  Fact.

  
  

  12 reach the VMFS Datastore in the new space using the command - growfs vmkfstools, specifying the partition containing the VMFS Datastore target twice.

  vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 '.

  
  

  It did not work. I got an error:

  / vmfs/volumes # vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' /vmfs/devices/disks/naa.6c81f660ef0d «»

  23001ad809071096d28a:4 ".

  Cannot get device head way /dev/disks/naa.6c81f660ef0d23001ad809071096d28a:4 information

  
  

  Also the partition was very different to what I asked:

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 1560018942 251 0

  
  

  I fixed it by running these commands:

  ~ # partedUtil resize ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 3865468766

  ~ # vmkfstools v

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 3865468766 251 0

  Update:

  Since it was such a new machine, not in active production, we have safeguarded the VMs management off the ESXi host. Then flattened the virtual disk, recreated, and then created a store of data with the right size. (TPG this time, naturally.) We put the management of virtual machines on the data store. For Windows virtual machines, we have restored the using AppAssure. Everything is ok now.

  Need to add a new item to the list of punch: check what Dell has done the configuration of the virtual disks. :-)

• I want to increase the size of the history panel

  I just upgraded to v. v. 34 17.0.1. In the old version, I could open the story as a full panel and see the places and dates in chronological order. Now, even if I have the "View > by date and site" option is selected, I can only see sites. Also, when I try to increase the size of the Group story to pause the cursor on the edge, the two-headed arrow icon does nothing.

  There is a minimum (min-width: 14em ;) and maximum (max-width: 36em ;) for the sidebar and you can not drag icon resizer beyond this limit.))

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #sidebar { min-width:0px !important; max-width:none !important; }
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration
  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• Deleting a group to a TDMS file increases the file size

  Hi all

  I was searching for information on how to delete a group in a TDMS file. Apparently this is not a simple task as I thought because firstly, it is necessary to convert the TDMS file in a TOC file, remove the group from the TOC file and finally convert the TDM in PDM file. There is a sample project really nice here (I have attached it in the post anyway!).

  This project works very well. Indeed, I am able to remove the group from the PDM file. However, I realized that perform the deletion process increases the size of the file (about 4 times). If you are viewing the PDM with the PDM file - file Viewer.vi you realize that several strange properties have been added to each channel of all other groups. I assumed that this is partly the cause of the increase in size.

  Anyone know why this is happening?

  I'm using LabVIEW 2014 and I downloaded the project for 2014 LabVIEW.

  Any help is appreciated to higlhy.

  Best regards

  Diego Ballen

  The old way was to read each group that you want to save and write to a new file. The fundamental problem is that TDMS format has been optimized for speed and no memory efficiency, which can cause a lot of complications when you seemingly simple things - like the deletion of data, or reading the data of the file.

  That is why NEITHER came up with these new features. If you're stuck with an earlier version, you can always write your own function to do the same.

  Mike...