I'm trying to copy a movie that I recorded off the coast of TV on DVD on my hard drive.

Similar Questions

• I tried to play some movies that I downloaded, but it says that I need the right codec to play.

  Original title: watch videos on media player

  I have an old computer for my son with XP on it. I tried to play some movies that I downloaded, but it says that I need the right codec to play. How can I fix that I can watch these videos?

  Hello

  1. what version of windows media player do you use?
  2. what type of media files are they?

  Check the following article to see if these files are supported by the Windows media player installed on the computer. If these files are not supported, then you will need to download the third-party codec to play.

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  THIRD WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information:
  How to Download Codecs automatically in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/291818

• I want to copy a picture of the paint and paste it into an email. System always told me that it records to the Clipboard.

  original title: Clipboard

  I want to copy a picture of the paint and paste it into an email.  System always told me that it records to the Clipboard.  Where can I get this Clipboard so that I can paste the photo?   Thank you.

  Hello

  CTRL + C copies to the Clipboard.

  CTRL + V paste it from the Clipboard.

  These FREE utilities will help in the use of the Clipboard.

  InsideClipBoard - free - whenever you have something to copy to the Clipboard to paste in another
  application, the copied data is saved in several formats. The main application of Windows Clipboard
  only display the basic Clipboard, like text and bitmaps formats, but only displays the list of all formats
  which are stored in the Clipboard. InsideClipboard is a small utility that displays the binary content of all
  formats that are currently stored in the Clipboard and allow to save the content of specific format
  in a binary file.
  http://www.NirSoft.NET/utils/inside_clipboard.html

  Another useful utility free allowing you to clear the Clipboard.

  ClipBoard Viewer - free - look inside your Windows Clipboard. See what your favorite
  ask, in four different (TXT, BMP, WMF and DIB) data format. This handy tool can also
  Clears the Clipboard. New version 2.0: now go to the Windows system tray! http://www.KarenWare.com/PowerTools/ptclpvue.asp

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• The MPEG-4 movie that I imported into the timeline of video group Photoshop plays in slow motion. How to play at normal speed?

  I am highly skilled in Photoshop for still photography, but go with the video. The problem I have encountered is the following:

  The MPEG-4 movie that I imported into the timeline of video group Photoshop plays in slow motion. How to play at normal speed?

  This must be a common problem. I would appreciate some words of wisdom.

  Thank you

  Victor

  The only way to do it with Photoshop, is to right-click on the clip and change the speed.  So if the clip was recorded at 60 fps and you use it on a timeline of 30 fps, set the speed to 200%

  

  Applications like Premiere Pro and After Effects (and possibly first Elements) allow you to change the frequency of images in sequence by sequence.   Photoshop is a tool very frustrating to use for video editing.  Premiere Elements existed comes with Photoshop Elements for a very reasonable price.  I have no experience with Premiere Elements, but I strongly suspect that this will be an order of magnitude better than Photoshop for video editing.

  Adobe Premiere Pro vs elements - comparison of video editors

• How can I copy video to a DVD on my hard drive in Windows XP?

  Original title: not a wiz here pc... How can I copy video to a DVD on my hard drive... I have windows XP?
  need help please... thank you in advance.

  If the DVD is "not" a commercial copy protected DVD...
  the following steps may be worth a try:

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is located in, and then select Explore or open to view the
  Directory of the DVD.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video from .wmv to for editing.
  (Note: in Windows 7 you may be able to import the)
  VOB files in Movie Maker just as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• I have problems in trying to get through my music files to W M P burn, I have them on my hard drive of diving, pro, cool edt and I can't bring them to burn, I need help :)

  I have problems in trying to get through my music files to W M P burn, I have them on my hard drive of diving, pro, cool edt and I can't bring them to burn, I need help :)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have problems in trying to get through my music files to W M P burn, I have them on my hard drive of diving, pro, cool edt and I can't bring them to burn, I need help :)

  ========================================
  Can you navigate to the actual file stored music files
  in and add it to the WMP library?

  File / add to library... or enter... F3

  Then, create a Playlist...

  File / create a Playlist... or type... CTRL + N

  Maybe the following will help:

  Windows Vista-
  Add items to the windows
  Media Player library
  http://windowshelp.Microsoft.com/Windows/en-us/help/60fc17d8-7924-4600-93e8-39873ee2d5e91033.mspx

  Windows Vista-
  Create or change a regular playlist in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-or-change-a-regular-playlist-in-Windows-Media-Player

  Windows Media Player 11 for Windows Vista
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  (Expand the section: "Burn audio CD")

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have vista, want to move to 7 but need to save on the hard drive content; Please suggest how I rub off the coast of virus, evil & spy when recording off content before loading of 7... ?

  OS: Vista home prem

  h/w: Dell Studio w/Centrino core 2, 2 GHz, 4 GB ram

  I want to rub the data as I save to an external hard drive, and then reload the OS with 7.

  Don't know what to use as a scrub tool and how to perform the backup off with scub.

  Please notify

  Hello

  1. which version of Windows Vista is installed on your system?

  2. you try to upgrade from Windows Update?

  First of all, I suggest you perform a scan complete antivirus on your computer and make sure your computer is free from Virus or malware.

  Method 1: Run a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  Now you can transfer your files by using Windows Easy Transfer

  Method 2:

  Step 1:

  I suggest you to Windows easy transfer to download and install it to transfer files on a hard drive.

  http://www.Microsoft.com/download/en/details.aspx?ID=14179

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Step 2:

  Know if your PC can run Windows 7

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Step 3:

  To upgrade Windows Vista to Windows 7, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  Note: If your edition of Windows Vista can not be upgraded to the edition of Windows 7 that you want to use, you can always install Windows 7 using the custom to place installation option. However, the custom option keeps your files, programs or settings.

  It will be useful.

• How to copy "Files on your computer" on a DVD or another hard drive?

  Using Vista Pro, hard drive ok. How can I copy files "folders on your computer" to a safe place of DVD or another hard drive. Motherboard broken will be replaced.

  * original title - copy "MSN 10" "files on your computer ' * '"»

  Hello

   

  Like you said motherboard broken will be replaced, then how access your computer?

  I suggest you follow the link to find out how to copy files and folders below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

• trying to copy a file that had been opened on another computer and get "invalid MS-DOS function".

  With a flash drive, I took a document to another computer with a version of Excel, I had never seen.  I then brought the document to my own computer, opened it and was missing the lines and columns headers.  I also tried to copy the file to my CD - RW and the message "invalid MS-DOS function".

  I think that you had better know what was the Excel program. and say to the people in the Forums of Excel when you repost here...

  Excel:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your questions Excel when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Can we move that a backup of the Windows Image to a different drive location years still be able to use it to restore?

  I did a Windows 'backup system image"when first of all, I got my new computer and put it on a hard drive internal, designated as"D", which was intended to be used for data. I tried to do a restore, and although very "fussy" has been able to do.

  The image of the system take much space and if I had to do over again I would have put somewhere else.

  I have read that the image cannot be moved to another location or it will no longer be abel to to beused to restore from. Is this true?

  (1) can I move the image of the system upward (and parent folders he created) to another drive (preferably external) and still be able to restore from it if necessary?

  (2) can I move the image of the system upward (and parent folders he created) to another drive (preferably external) and move them back the same origin drve and still be able to restore from them if necessary.

  (3) the optimum would be a stand-alone backup on external media (such as the blu - ray, DVD, etc.) to restore from scratch, if necessary.

  I use Windows 7 64-bit.

  Thanks in advance.

  You can move your images wherever you want, but to restore from them, the WindowsImageBackup folder should be moved to the root of a drive, so you can move it to

  J:\WindowsImageBackup

  for example.  J: didn't need to be the drive that the image was made for the first time on.

  I found confusing indications that Windows might support images being elsewhere as the image during the restoration list would identify the correct date & time for the last image on the disc.  However, it would then only work with an image that I grow in X:\WindowsImageBackup as explained above.

  I managed my images using a subfolder of H:\ J:\ or O:\ called ImagesWin7, which itself has 20120205 1126 etc. subfolders.  I put some descriptive info I want in the relevant subfolder so I can see key information easily if I want to restore.  Then, I create the image & move this folder WindowsImageBackup, so I find myself with O:\ImagesWin7\20120205 1126\WindowsImageBackup and I also have a 1126\Explanation.txt of O:\ImagesWin7\20120205 of the text file that contains my notes on what I was just doing or was about to do on the system.

  What is resolved issues for you?  If this isn't the case, please let me know your remaining questions.

  It IS a big help (since this is exactly what I was trying to accomplish).

  Education path for my pictures of system includes a machine name

  (i.e. the 170453\ J:\WindowsImageBackup\MachineName\Backup 2010-12-03)

  Can I have added the word "Backup" myself as a descriptor that I don't remember.

  I also have added the subfolder/directory "MachineName" myself. I don't remember.

  Will have to start from scratch and create another backup of WindowsImage (without any writing help) and see what is the path for this image. Then attempt to restore etc and if it works then try again restore one of my old backups.

  It may be I made the backup unusable images (even if they are visible for the restore program) by changing the path and / / or folder names. Although it seems that you have also done this with your "imagesWin" directory You replace the image backup in the root directory, and then restore it?

  The only reason for all this must be able to reach and (if necessary access and restore from) one of the first images saves when the machine was new, blank before installing the software ay etc. Easier to make a bare metal restore to install Win7 from scratch, load the drivers and configure etc.

  As mentioned above, I now use ShadowProtect Desktop 4 for backups image system (including incremental images) and have found that it is great (and images can be moved to any directoyr and bootable recovery environment will restore bare metal from any location, USB, DVD, same network etc.

  Better documentation of Windows would have certainly been useful,

  Thanksfor your ideas

• I am trying to create a function that would be on the table type returns.

  Gurus,
  
  I am trying to create a function that returns a table nested with 3
  columns in a table as a guy.
  
  my query is like
  
  Select col1, col2, col3 from table_1;
  
  I am a bit newbie in Oracle and have never used collections.
  Can you please guide?

  >
  I am a bit newbie in Oracle and have never used collections.
  >
  Then you should start with the documentation
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/TOC.htm

  Chapter 5 is all about collections using PL/SQL and examples
  >
  I am trying to create a function that returns a table nested with 3
  columns in a table as a guy.
  >
  This isn't enough of a description to know what you're trying to do, or how you plan to use the service. The query you provided is completely irrelevant to the question you are asking.

  You ask about functions in pipeline? Here is an example of this

  -- type to match emp record
  create or replace type emp_scalar_type as object
    (EMPNO NUMBER(4) ,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     MGR NUMBER(4),
     HIREDATE DATE,
     SAL NUMBER(7, 2),
     COMM NUMBER(7, 2),
     DEPTNO NUMBER(2)
    )
    /
  
  -- table of emp records
  create or replace type emp_table_type as table of emp_scalar_type
    /
  
  -- pipelined function 
  
  create or replace function get_emp( p_deptno in number )
    return emp_table_type
    PIPELINED
    as
     TYPE EmpCurTyp IS REF CURSOR RETURN emp%ROWTYPE;
      emp_cv EmpCurTyp;
      l_rec  emp%rowtype;
    begin
      open emp_cv for select * from emp where deptno = p_deptno;
      loop
        fetch emp_cv into l_rec;
        exit when (emp_cv%notfound);
        pipe row( emp_scalar_type( l_rec.empno, LOWER(l_rec.ename),
            l_rec.job, l_rec.mgr, l_rec.hiredate, l_rec.sal, l_rec.comm, l_rec.deptno ) );
      end loop;
      return;
    end;
    /
  
  select * from table(get_emp(20))
  

• Try, without success, to copy the large bundle on Seagate 2 to 4 hard drive fcpX

  Hello

  New to this. New on FCPX (self learning)... not sure of the terminology, etc... apologies for naïve questions before. I really appreciate your help.

  I tried to make a backup of hard drive Seagate 4 TB to another 1. Don't copy an extra-large FCPX bundle (1 to). ' "About a quarter of the way by it gives me error - 36" cannot be copied because some files cannot be read or written "message.

  I tried to restart, I tried the dot_clean, I tried to remove all rendered files, I reformatted the hard drive with exFAT (supposedly for large files)... I don't know what else to do. I really need to get this thing saved!

  I would be fine even if I could just backup the deadlines on the backup drive so I do not lose my changes if something were to happen. I need only really the media in one place, right? From now it is all copied in the project...

  The frustration here.

  Thanks for your help

  M

  Format OS X journaled.

• Hi, I want to migrate Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a hard drive that is separate so I can get to o

  Hi, I want to migrate thousands of images of Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a separate hard drive so I can get more old photos looking at the content of the package and by copying and pasting in a recovery file, but it will be painful and very long. What do you suggest me? I thought that Aperture 3.6 was supposed to open at Yosemite or El Capitan? Thank you bripoppamac44

  and when I double click on the App opening, it does not open.

  What happens, when you try that? You get an error message? If so, what error?

  Opening 3.6 works well with Yosemite 10.10.5.

  d I keep the nearly 200 gigabytes of photos on a disc hard separated so I can get more old photos looking for the content of the package and by copying and pasting in a recovery file

  What is the file system on this disk? And how the player is connected?

• I have an external hard drive that I formatted using vista. I can't read this same hard drive with xp

  I recently formatted a WD external hard drive via my computer vista laptop. I downloaded several MB of files on the hard drive. My Vista laptop crashed and I need a new hard drive. I'm trying to access these files through my XP laptop. I see the DRIVE - "D". However, when I try to access the drive, what happens with "the disk in drive d is not formatted" do you want to format it now?

  That fixed my problem. I can now access this drive.

  Thanks a lot for your help.

  PS - If you feel that fully answered your question, you should probably close the issue by checking the answer that you used to solve the problem...

  Simply click on the button to mark as answer to the reply that you felt answered the question you originally posed and inspired throughout the conversation: