I'm trying to fix my Solution Center MSI

Similar Questions

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• Microsoft fix it solution center has begun Error Message: convenience store does not apply to your system

  The fix it solution has always worked before now. I can't even use the portable download when it finishes I get the error message. I am also the one who said it was not compatible with my current setup of the system. Please fix this for me.

  Hi Patricia,

  I suggest you to download the Windows Installer (. Windows6 0-KB942288-v2-x 86.msu) from the following Web site and check if it helps.

  Windows install 4.5 Redistributable
   

• Solution Center msi

  Whenever I have this laptop start a popup ask solution center cd. I have not the same. Where he is.

  The only printer on this machine is a hpD4260

  I have very good news.

  Released the patch that corrects this problem for some of our products.

  Here is the link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&lang=en&OS=2093&product=3560280

  Thank you

  Message edited by JonW 24/09/2009 09:23

• HP - scanning problem solution Center

  I was in the middle of the digitization of images in a Word 2010 by using my HP6310 all in one document. After scanning a selected section of a page like I did several times, I got a message saying:

  "An internal error occurred during the processing of the document. Click OK to close the program and then try one of the following values:-restart the program. -Restart the PC and then try again. -Reinstall the software photos & images and try again. »

  I tried to close and restart the HP Solution Center and the word. I tried scanning in a new Word document. I tried to restart the PC. I've updated the software of HP. In the process, I found and downloaded the HP printer Diagnostic tools. When I ran the Scan doctor, I got a message saying:

  «Center of solution error: your system needs an update to fix this Solution Center error.» Click on the "Get Update" to download the update. Once the download is complete, run the downloaded file to update your system. »

  However, when I clicked on "Get Update", I received the following message: 'could not open the page. The service or the information requested is not available at this time. Please try again later. (Error: system-websrv_unavail) »

  I tried to restart several times over a period of several hours.

  Before this problem in his set, I started to receive error messages when I tried to save the Word file containing scanned images. The messages said that I could not save due to a file permission error. The message does not always appear, and I found I could work around the problem by using the function save pennies on the file tab. I don't know if these two problems are related.

  I am using Windows Vista 64-bit.

  Hi @CL-HP

  There are indeed a few updates available, which may be necessary; However, I think it would be better first to perform a full uninstall, then reinstall the software, then look for the necessary updates.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• T440S corrupted after update solution center, no menu start

  My T440S has corrupt files and the various problems which all seem to have started (maybe) an update of the lenovo Solution Center. I have Windows 8.1, model number 20AQ-CTO1WW. Problems:-"Windows Start menu" anything when you click it doesn't. -You try to start the solution Center Gets error "this application requires a version of adobe air, which can not be found. -Try to update or reinstall adobe air gets the same error shown above. -Try to uninstall adobe air gets the same error shown above. -I can't begin to interface user of Norton Internet Security. I tried to go back to a repair system point before all this began, and the return seems to work, except that the problems are all still there. I tried to reinstall the solution Center, downloaded 2.4.003, page load version low said that t440s is taken in charge. However, when I try to install it, I get the error "this version of lenovo Solution Center program can only be installed on select lenovo computers. This installation cannot continue. "I can't find a download of 2.4.002 on the lenovo site. I can't start the user interface for the solution Center, I get the error of adobe air. I ran sfc/scannow and got the "Windows Resource Protection found corrupt files but could not solve some of them." I see several files in the log that must be replaced, but I don't know how to replace them. I don't have a win 8.1 installation media. And when I try to create the recovery partition recovery media, I get an error that the file is missing (or something like that, I'm sorry, could not capture the exact error). so... suggestions welcome! I'm not positive all started with the update of the solution Center, but it's my best guess. Thank you!

  Just to conclude this, I have my system working again. If it actually occurred during the update of the solution center or not, I can't be sure, but what it, caused repeated error saw afterwards was "the application could not start correctly (0xc0000142)", listed in a dialog box, for many applications (when I tried to get the start menu, when I tried to run some applications (but not others) When I tried to install something new. The steps that finally cleared up things were:

  ran-a ' sfc/scannow' in a guest of administration. SFC found errors, but could not fix them.

  -Ran chkdsk, some disk errors were found and corrected.

  ran-a ' sfc/scannow' in an administration invites once again, same error still there, could not be repaired.

  -ran "Dism/Cleanup-Image /ScanHealth Online" in a prompt administrative., he finds errors and said they were repairable.

  -ran "Dism/Cleanup-Image /RestoreHealth Online" in a prompt administrative., he says he is able to repair the windows image. However, problems still occur.

  -run "sfc/scannow" in a guest of administration, and this time, it was able to repair the corrupted files. And after that, everything works again.

  Here is the info on the microsoft System File Checker: http://support.microsoft.com/kb/929833

  Here is an article on the help of DISM to repair a windows image: http://technet.microsoft.com/en-us/library/hh824869.aspx

• Error msi solution Center #2732 for Windows Installation Package

  I get a window with the Solution Center msi above error message.  I have a Dell w/Microsoft Windows XP computer.  How can I get rid of him?  This happened for weeks & I'd like to fix or disable it.  I went into the center of Solution & tried to remove this package to install a windows but the computer will not let me.  He said that it is a read only file on a CD.  I don't know what he's talking about.

  Thank you

  http://www.JustAnswer.com/computer/2tma4-Solution-Center-installer-problem-package-error-code.html

  I searched on Bing for your error msg. Maybe the link above will help you.

• Series of HP Photosmart C4500 - problem Solution Center

  Whenever I start my computer, a box appears that says "Solution Center" - the component you are trying to use is on a network unavailable resource. Check ok to try again or enter a different path to the folder containing the installation package. The path shown is Solution Center.msi and use source is: C:\users\toni\appdata\local\temp\7zS36A7\setup.

  I clicked on 'Browse' computer, local disk C, program files (x 86) created HP 29/09/2013, open cllicked and nothing worked. I had to click on 'Cancel' many times before disappearing. Then he said: check HP site for a fix.

  HP is no longer my printer HP Photosmart 4520 present on its support site and I can't find any way to stop this message from appearing whenever I start my computer which is a HP Pavilion dv6-1230us Entertainment Notebook PC.

  The printer works fine and when I opened the center of Solution from the Start button, it opened.

  Hi ToniB1,

  Thanks for providing this information.

  I would disable the two of them. Everything that is related to HP.

  Then restart it to see if the error appears again.

  If you are still questions then I'd another uninstall and reinstall. Sorry, I know that you have already done this a few times, but with these additional steps should solve the problem.

  Please follow the steps listed below:

  Uninstalling the printer software.

  Ignore the name of the model.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%.

  Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted.

  Run all Windows updates.

  I would register in the register of installation of the window.
  Go to start, select Run type in msiexec / unregister then click OK, and then type msiexec/regserver, then click OK.
  (Make sure that you type it in exactly, there is a space between the two)

  Disk Cleanup tool system Accessories\ How to delete files using disk cleanup.

  Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html

  Restart the computer.

  Go to the start up programs and disable any startup programs to see if this will allow the full software to install. (msconfig)

  Apply the settings, and then restart the computer.

  Temporary disable all Antivirus software.

  Reinstall the software of the printer again.

  The printer test again to see if everything is installed.

  Please let me know the results.

  Thank you.

• Cannot find an installation package for Solution Center

  When I start my computer, a box comes on the screen saying: Solution Center please wait while windows configures Solution Center.        (On the bottom of the box there)    Cancel
     
  Then another box comes in addition to the one that says the Solution Center OK and cancel (in the upper right corner) the component you are trying to use is on a CD-Rom or another removable disk that is not available.
  Insert the disk Center of Solution and clk OK (at the bottom of this box is a box saying - use source - and another nest box to it with - browse - in.)

  When I click on cancel another box appears.      It said Solution Center X (top right) (there is a small warning sign, then an installation package for the productSolution Center is not found. Try the installation again using a valid copy of the installation package "Solution Center.msi."     OK (bottom)

  I have very good clk and then cancel to get it off my screen.    Is there a place I can get this Package of Solution or a way to keep these boxes appear each time I turn on my computer?

  So the Solution Center probably has to do with your HP printer. I believe that you need it to use all the features of the printer. that is, scanning the computer. Knowing that you have an HP printer let me do a Google search. This is one of the links to the forums of HP that describes a fix (scroll down to the second position of Douglas Leshures):

  http://forums13.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447627+1239667320346+28353475&ThreadId=1201005

  If you want to see other related links, I used this search term to my search on Google:

  "Center of solutions HP please wait while Windows configures Solution Center"

  If you feel uncomfortable a lot of computer work - and it's perfectly OK to admit it, because we have all our areas of expertise - have a competent local computer tech, come on up. I do not recommend using a type BigComputerStore/GeekSquad of the place. MS - MVP - Elephant Boy computers - don't panic!

• Computer attempts to load Windows Solution Center

  After downloading the latest update of Windows Vista, the message said: he's trying to load Microsoft Solutions Center.  Then he said: "insert disc Solution."  We had a drive of 'Solution' with computer laptop.  How get rid of the message.

  Thank you for your help.

  Hi Dotag,
  

  1. you are using an HP computer?
  2. in the error message is display Microsoft Solution center or HP solutions Center?

  3. If the HP Solution Center, which seems to be a common pop-up message on HP computers.

  I found a few articles on HP support forums.
  http://forums11.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447626+1264082840743+28353475&ThreadId=1201005

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/Solution-Center-disk/m-p/1088

  http://h30434.www3.HP.com/T5/operating-systems-and-software/solution-Center-disk/m-p/137855
   
  4. in the thread below refer to the position of 'Marilyn' - Support Engineer:
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/ed082db1-853a-4357-899A-67cde03a22e8
   
  5. the similar problem was also discussed on Windows Microsoft answers Forums:
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/db6f7992-bd26-45d9-B453-fc0c510c4a7e
  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/6d2d77f3-1115-42ef-94cc-aa7d4343a23e

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re HP solution Center - install for 2600 printer using windows 7

  I read all of the solutions that I can find, and it's not there!

  I kept losing my printer 2600.  He seemed to just go.  I could reinstall with the installation software I downloaded, but then just leave.  Then I removed the HP solutions Center restarted and I tried to reinstall the Solution Center.  Now I get a message that it cannot find the installation file.  It looks in the Directory isn't there.  I continue to remove the old directory %temp%/7z***, but he can still find it. Help!

  Hi tweb,.

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=421139&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=421139&sw_lang=

  10. run the download to reinstall the printer

• HP SUPPORT Solution Center does not open. Get the parse error...

  I have a HP Pavilion dm4 and HP J6480 printer.

  When I try to open the HP Solution Center I get the following error message - "error Parsing file C:\Program Files (x 86) \HP\Digital Imaging\bin\hpqsloc\1033.xml".

  I tried to reinstall from the original disk from HP.  It works not - says my system (Windows 7-64 bit) is not supported.  But it worked a couple of years ago, when I did first install it.

  I tried to download and reinstall the drivers for my printer.  It does not work.

  I tried to uninstall HP Solution Center, but it wouldn't uninstall.

  I tried to rename hpqsloc to hpqsloc.old and copied the file from my computer of wives to mine.  It does not work.

  I tried to copy the entire file digital image from his computer to mine.  It does not work.

  I assumed that the simplest solution would be to uninstall and reinstall but no luck

  "" "Frustrated - HELP. '"    Thank you!!

  all right you have the software CD if so

  the CD opened by a right click on the CD icon and select open

  Then look for the folder named UTIL

  Then open CCC

  Then look for the uninstall_L3.bat doulble click on it

  you will be asked for your permission can be several times

  and you will see a black screen, then it will ask you to restart your computer

  now, try to install the software and it will work... good luck

• Why do I get an error on "Solution Center" message when I open my computer

  Whenever I open my computer I get the error "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc from center of Solution and click OK. "It is followed by"an installation package for the product that takes Center cannot be found. Try the aain of installation using a valid copy of the installation package Solution Center.msi".

  The solution center is part of the HP printing software. Put the HP printer installation disc in your drive when you are prompted, and then click 'OK '. MS - MVP - Elephant Boy computers - don't panic!

• Microsoft set the Solution Center still available?

  Hello

  I clicked on my shortcut on the desktop of Microsoft Fix Solution Center and discovered that this software Center is no longer available. It seems that something has changed in what concerns the Solution Center. The center of covered troubleshooting software issues with Windows, Internet Explorer and many other issues of troubleshooting of software in a location convenient. What happened to Microsoft Fix it Solution Center?  Please notify.

  Hi Mark,

  For me this link to Microsoft Fix it Solution Center works very well: https://Support2.Microsoft.com/FixIt/en-us

  EDIT January 2016:

  Microsoft has decided to make things complicated for users of Windows 7. Difficulty this Microsoft Solution Center no longer exists.

  The only 'help' (unorganized) link from Microsoft for Windows 7 is as follows: http://windows.microsoft.com/en-us/windows/previous-support#1TC=windows-7

  BUT: go here and you will find all the "FixIt" s listed: http://www.ghacks.NET/2009/08/11/list-of-Microsoft-fix-it-solutions/

  See you soon,.

  J

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."