I'm trying to put a Transition chained between two elements placed one above the other.  I tried and I failed.

Similar Questions

• FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

  When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

  I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

  The depth of the rectangle is fine when I view in muse but only cuts off when published

  Hello

  It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

  Please take a look at the screenshot. I have it increased by 311 px and his work form me.

  Please take a look at the screenshot for better understanding.

  

  Concerning

  Vivek

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• How to stop a freeze on transition framing between two video clips?

  Hi all

  Newbiee here

  How to stop a freeze on transition framing between two video clips?

  Cheers for your help in advance.

  Make sure that your clips have long enough 'handles', extra material before and after the change, the less both the duration of the transition.

• How can I put no one above the letters just like a magazine cover?

  How can I put no one above the letters just like a magazine cover?

  I think you want which is informally referred to as a "sandwiched"image. " Here's a tutorial:

  https://InDesignSecrets.com/image-sandwich-putting-image-front-text.php

• How do you put bookmarks of one on the other computer?

  I have a new laptop and I want the bookmarks from the old laptop on my new.
  How do I do that?

  Take a look at http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• Bootmgr missing and I have tried using the recovery installation window and it fails. no operating system are loaded.

  Double post merged and deleted.  Post moved from XP to Vista forum forum>

  Laptop HP discharged linux os, linux is the only operating system on laptop... Loading Vista missing bootmgr, the recovery option window has not repaired the file. I have no operating system in SYSTEM RECOVERY WINDOW. I chose load drivers and I am looking at the OPEN window and the SOURCE and do not know what to do next or what file to select sources. I would appreciate your help. Thank you

  Hello

  Here's how to reinstall Vista as you no longer have a recovery partition.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do it for a small fee

  HP:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143#N76

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• Trying to avoid one complex path of the other, can not get the result I need

  I would really appreciate some help on this. I'm not familiar with illustrator and am stuck trying to accomplish what I hope is an easy task. I transferred my .ai here just in case someone can help.

  I have two layers, one is a collection of lines/paths that make up a drawing of a tree, then brush the top layer which is a bunch of paths using a 'distressed '. I've read several tutorials on using the pathfinder tool to subtract one from the other, but whenever I find myself with the path of the deleted tree I want. I tried a simple test case (subtracting one afflicted a rectangle shape path) and it worked as expected. I don't know why it doesn't work no other that perhaps it is simply too complex.

  On the left (red background CCG) is it that look like my layers, on the right is the effect I'm trying to achieve (parts white removed the black parts). I need this to end up being a vector, then it can cut a vinyl sticker.

  

  Thanks a ton for any help, I am really stuck on what I spent 99% of my time in photoshop.

  You can do this with multiple paths or groups. Create transparent traces. You can check if there are still groups in the layers panel.

• Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

  Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

  I had to wipe my drive since then with the trouble with Apple Store without acknowledging my machine and Time Machine reloading gave complications. Can you please cancel my trial and make my money from trial.

  Hi jack gordon.

  Adobe does not charge for the 30 day trial, but it seems that you have subscribed to Acrobat Pro (as a simple app for creative cloud membership) return March 15. To cancel your subscription, please contact customer service.

  Please let us know if you have any additional questions.

  Best,

  Sara

• I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  Copy the program through a new machine will not work.   Install it using installation files and activate using the serial number assigned to the license.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

• How to upgrade my Quicktime 7 Player Quicktime 7 Pro? I am trying to upgrade the application Quicktime 7 and he continues to send me to this information page unrelated to an upgrade or buy and download option.

  I'm trying to upgrade to Quicktime Pro in the Quicktime 7 application and he continues to send me to this information page unrelated to an upgrade or buy and download option. How to upgrade my Quicktime 7 Player Quicktime 7 Pro?

  Unless you already have a QuickTime Pro key, you can't. Apple stopped selling them.

  If you do open it, choose recording in QuickTime Player 7 menu and put your key.

  (143612)

• Sort order of artist - tried and failed

  I have tried everything to rectify the problem shown in the attachment. I added some text at the end of the artist and album artist as well as the genre as respective fields, then put them to what they should be. Also, I tried to hide form fields to completely sort and the albums in question the list always out of order.

  I compared the verses of other albums by the same artists who are properly sorted in the artist's view and don't see any difference.

  Someone at - it ideas?

  

  mines do not do

  What version of iTunes are you running?

  Also, you need other Hendrix albums. Just say "."