Photosmart 6520: green light behind the printer

Similar Questions

• Printers HP DeskJet 3632: what is the green light on the back of my printer?

  I have a HP DeskJet 3632 all-in-one printer. There is nothing wrong with it. But I would like to know what is for the green light on the back of it where the cable plugs in to.

  Anyone know?

  I suspect it is just the power led.

• HP Photosmart 6520, I'm trying to print Avery 5160 labels.

  HP Photosmart 6520, I'm trying to print Avery 5160 labels.  The spacing is off from the margin of 1 inch on the top which should be 1/2 in.

  Just found solution on this forum.  When you print, click PROPERTIES.  Click NONE to "Print on both sides."

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Toshiba 40RL953 became unresponsive; green light at the edge of

  Today I have updated the firmware on my TV via the internet. After the update had completed, I browsed some improvements for awhile and watched television.

  An hour or later, I became a game of children on Toshiba places.
  After finishing with the game, I stopped and the TV became unresponsive. green light on the Board but no response to remote or onboard controls.

  After 30 minutes of waiting, I turned off the wall, but when the computer reboots, the same question occurred, TV is completely insensitive with screen black but turned on.

  While I wait for CS to get back to me, anyone have any ideas?
  Can I previous back on firmware flash from a USB Pendrive without access to the menu system, or anything like that?

  > I fixed it, so for those who have TL93x series, this is my email address [email protected], I'll try to help you.

  Could you share your experience and your knowledge here in the forum?

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?

  My HP Photosmart Premium is saying "preparing the printer can not be interrupted.  Please wait... "What is happening?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-premium-error-message/TD-p/1470957

  HP support

  Edit:

  I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.

  I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge).  I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely.  This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges.  She also told me that there is a paper jam, even when there is no paper in the machine.  I even let the maintenance run all night without success.

  Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.

  above compositions of this thread:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/HP-OfficeJet-Pro-8500A-plus-printer-is-stuck-in-maintenance-mode/TD-p/1207907

• How can I unlock small green light on the touchpad?

  OT: Press the key.

  I have Windows 7 on a HP computer. The touch pad has locked, there is a small green light on the touchpad. How can I unlock it.

  do not forget that I can't move my mouse because he is blocked so I can't hit anything even that the arrows are locked

  

  Press firmly

• Printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out

  I have a printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out. I can't find the ink level monitor. Can you help me?

  If all else fails, read the user guide:

  http://files.support.Epson.com/htmldocs/sc88p_/sc88p_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

• Balancing the source of artificial light behind the temple

  Hi all

  Creating an HDR image, I reached this magnificent result which contains, however, an artifact that I want to eliminate.

  Looks like it's a source of light behinde the temple, but there is none. I want it to appear completely normal, with the sky changes not at all close to the left and to the right of the temple.

  Can what tools I use to achieve this? I tried the dynamism and saturation but am very disappointed with the result... I also available Photoshop so please tell me if that would be better suited for this task.

  Best regards

  Philipp

  

  This is commonly called a halo. You will notice that the effect is also on the horizon.

  The common solution is to reduce some of the effects of treatment in the HDR treatment.

• Photosmart 6520: Trying to find the Code of 'request' to record the HP printer connected.

  Printer Photosmart 6520 of is (and works perfectly), allows to print emails ok phone mobile, as the e-mail address of the printer (HP eprint one), but not able to record my printer on the HP connected site as unable to find the Code for "request".

  Have followed the instructions from HP to "Print report" and ran every possible piece of information apart from the "request Code".

  Can only guess that previously while modifying the HP eprint address and making it more user-friendly, I already activated and used the claim Code?

  I would like to fix this, so I can add a printer and display the record of the emails sent for printing.

  Appreciate any advice.

  Thank you very much.

  Hello

  The claim code to customize your ePrint address, which means that it's already been claimed and is no longer valid.

  In order to obtain a valid claim code, you will need to disable web services and reactivate, however, that means that you must select a different ePrint for the printer address, the current will not be available.

  To do this, click the Web Services and select settings, then select delete the Web Services.

  Open the Web Services option again and follow the steps to reactivate, an information sheet will include the new claim code.

  Then you can add it to the connected HP and select a new personalized email

  Kind regards

  Shlomi

• DeskJet 932C, Windows 7, a red and green light on the machine will not work

  Both my red light and green light are on and printer has stopped working.  What, on the contrary, do in addition to become another printer? When I press red light nothing happens. When I turn printer off and on again the same lights appear.  When I open the cover, nothing happens.  Should I throw away it and get a new one or can it be fixed?

  It seems that the camera is blocked in an error state.  There is a section in the user guide for the printer Deskjet 932C which covers when there are flashing lights.  I'll link this information below.

  The user guide can be found here.  Page 40 of the user's guide provides information about the error lights up on the product.  Follow the recommended steps and let me know the result.

• Photosmart 6520 does not pdf file print.

  Just bought a HP Photosmart 6520, WiFi, Win Vista, Explorer 8 configuration,

  and so far, everything seems to be printing with the exception of

  When I try to print a PDF file.

  Any help would be appreiated,

  Read

  Hello

  Thank you for your response.

  Because the problem is now solved, do not follow the other steps or the first step. You can copy these steps and save it in a file for later reference. In case, if the problem happens again in the future, then you can try more of these measures. For now, do not follow step.

  Good impression.

• Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

  Hello
  My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
  Help, please. Thank you

  Hey @Kybosh,

  Welcome to the Forum from HP Support.

  I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

  I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

  I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

  • Front panel of the printer, press the key
  • Touch tools
  • Touch Restore Factory Defaults
  • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

  With your restored default settings, continue on as indicated:

  • Touch the wireless icon ()
  • Run the Wireless Setup Wizard and reconnect to your network (SSID)
  • Enter the wireless password if prompted
  • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
  • Tap the icon of webservices ()
  • Enable Web services and press OK to enable your printer will automatically update
  • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

  Now, if all goes well you can rebuild your Setup email scan:

  • Tap the scan icon
  • Tap the scan to E-mail
  • Enter your personal email address
  • Retrieve the PIN code of your Inbox
  • Enter the PIN on your requested to complete printer installation

  The above restore the functionality you were missing?

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Please post in the Forum of HP's Support and have a great day!

• WiFi on but green light on the airport is not

  I and Airport Extreme. WiFi works, but the green light is not lite. If I unplug or click the reset button, it flashes orange, and then darkens. I ran a diagnosis and everything he says is done, which is to use a unique name, use WPA2, connects automatically, etc.  Why the green light does not illuminate? Is it important because the WiFi is on?

  The Green LED has probably failed. As long as everything works OK, you can ignore the 'question '.

  However, if the airport is 4-5 years, it would be time to start thinking about a replacement... given that the average life of the airport lasts about 4-5 years.