I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

The depth of the rectangle is fine when I view in muse but only cuts off when published

Hello

It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

Please take a look at the screenshot. I have it increased by 311 px and his work form me.

Please take a look at the screenshot for better understanding.

Concerning

Vivek

Tags: Adobe Muse

Similar Questions

  • I'm trying to put a Transition chained between two elements placed one above the other.  I tried and I failed.

    I'm trying to put a Transition chained between two elements placed one above the other. To the left of the line that she plays in the lower clip and after the line, he played in the clip above.  Is that it can be done when the two clips are on the other? I tried and I failed. Help please.

    Also how do you call this long line like?

    Thank you.

    simply put your 'top' clip where it belongs - in the scenario

    Select the clip, Option - command - down

    the secondary has no replacement for 'tracks '...

  • How can I put no one above the letters just like a magazine cover?

    How can I put no one above the letters just like a magazine cover?

    I think you want which is informally referred to as a "sandwiched"image. " Here's a tutorial:

    https://InDesignSecrets.com/image-sandwich-putting-image-front-text.php

  • I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

    I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

    [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

    [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

    [This is an open forum, not the Adobe support, please do not post personal information]

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Serial number and activation support (non - CC)

    http://helpx.Adobe.com/x-productkb/global/Service1.html

  • FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

    When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

    I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    Try disabling hardware acceleration in Firefox.

    Create a new profile as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • Get the data with more than one of the desired value

    Hello

    I need to shoot the records with one value of 'Other' more on delivery days fields.
    Delivery of fields are Mon, Mar, sea, game, Fri and Sam that indicates where the item will be shipped. The value can be at home, work, or other.

    Examples of data include:
    cust_id: 123
    Article: newspaper
    Mon: Home
    Kill: Work
    Sea: other
    game: Home
    Fri: other
    Sam: other


    And here is my request so far.
    Select
    cust_id,
    agenda,
    LUN,
    Mar,
    Kills,
    game,
    Fri,
    Sam
    sum (case when (del_mon = 'o' or del_tue =' o 'or del_wed =' o 'or del_thu =' o 'or del_fri =' o ' or del_sat = 'O') then 1)
    otherwise 0 end) as day_ctr

    of the customer

    Could you please help me with the right formula should I get this?

    Thank you in advance...

    Hello

    This should do it:

    Scott@my11g SQL>with sampledata as (
  2  select 123 cust_id, 'newspaper' item, 'Home' mon, 'Work' tue, 'Other' wed, 'Home' thu, 'Other' fri, 'Other' sat from dual
  3  union all
  4  select 456, 'newspaper' item, 'Home' mon, 'Work' tue, 'Home' wed, 'Home' thu, 'Home' fri, 'Other' sat from dual
  5  )
  6  --#### True query starts here ####
  7  select *
  8  from sampledata
  9  where (
 10  decode(mon,'Other',1,0)
 11  +decode(tue,'Other',1,0)
 12  +decode(wed,'Other',1,0)
 13  +decode(thu,'Other',1,0)
 14  +decode(fri,'Other',1,0)
 15  +decode(sat,'Other',1,0)
 16  )>1 ;

   CUST_ID ITEM      MON  TUE  WED   THU  FRI   SAT
---------- --------- ---- ---- ----- ---- ----- -----
       123 newspaper Home Work Other Home Other Other

  • TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

    I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

    Hello:

    Normally 5 beeps means there is a problem with the memory.

    I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

    If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

    If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

    Then replace the faulty memory module by one with the same specifications.

    If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.

  • Why is there a white line around 1200 pixels and it will appear when I write the site?

    Hello

    I'm working on the creation of a website through Muse and as soon as my site is greater than 1200 in height, it shows that white line. How to get out or will it disappear when I write the site?

    Thank you.

    Nicole

    There is no such a limit. Could you post a screenshot of this white line?

  • I have 2 Gmail accounts that I use Thunderbird to work with. Suddenly, one of the accounts has stopped working (password requests).

    For a year I used without problem Thunderbird to work with two of my Gmail accounts without problems.
    I had been on a long trip for the last 2 weeks had not begun to Thunderbird. When I did it for the first time this morning, I couldn't work or another account with it.

    Reset, return all settings solved the problem for ONE of my accounts (the main!), but the other continues to refuse to work.
    Yes, I have IMAP and less secure device permissions enabled in the Gmail settings. I changed my passwords and their update on all ends and again, my main account works, but the other refuses to accept passwords, even though I know they are correct.

    I still get the "cannot connect to server imap.gmail.com ." Message and I am prompted for my password.

    No luck.

    Could someone help me novel?

    Thank you very much,

    Zea

    After digging around a few others, I finally managed to find the google site:

    https://support.Google.com/accounts/answer/6009563

    There is a link on the bottom, saying: "allow access". Click on this one, 'continue' and directly there after prompt to synchronize Thunderbird. That solved the problem.

    Synchronize Thunderbird now until my two accounts again.

    Thanks for all the help and all the world looking in there, I hope this helps the other 3 who clicked on they have the same problem.

    PS: In your web browser, you must be connected to the Google account with disorders!

  • How can I get rid of the toolbar of bookmarks on the left of the screen (not the one above)? Never had until recently and he takes my place of the window. Thank you, Michael!

    Firefox 6.0.2

    User Agent: Mozilla/5.0 (Windows NT 6.1; rv:6.0.2) Gecko/20100101 Firefox/6.0.2

    Windows Presentation Foundation
    File: NPWPF.dll
    Version: 3.5.30729.1
    Windows Presentation Foundation (WPF) plugin for Mozilla browsers
    MIME Type Description Suffixes
    application/x-ms-application xbap xbap XAML Browser Application
    XAML application / + xml Document XAML xaml

    This is called the sidebar. If you press Ctrl + b, it will switch between open and closed. (Ctrl + h activates / deactivates the sidebar of history.) Does it work?

  • my printer print printing one above the other two work how do I get this to stop

    my daughter copied then pasted then printed a confersation Facebook it printed without problem but now everytime I try to print something again that which my daughter printed is being printed under also, I don't think it's that the print printer requests I directly from my printer are very well

    Hello

    . What is the brand and model of the printer?

    You must cancel all the print jobs for a printer, you must have permission to manage documents on the printer by following the steps below and let know us the status of the issue.

    a. open Printers by clicking the Start button, clicking Control Panel, hardware and soundand then click Printers.

    (b) to open the print queue, double-click the printer you are using.

    c. click on the printer menu, and then click Cancel all Documents. Function of the printer, the printing element could finish, but the remaining items will be cancelled.

     

    Note:

    . To quickly view which print jobs are underway, double-click the printer icon in the notification area.

    . To display the permissions of your printer, right click on the printer you use, click Properties, click the Security tab, and then click your user name. If your computer is on a domain, printer permissions can be controlled by your administrator.

    I hope this helps.

  • How can I join two images, one above the other?

    I have two images in jpeg format and have to join them to each other vertically. PLEASE HELP NOW! Thank you.

    File > New in the menu and choose a size of pixel height that is the sum of the height of the images pixel size.  Do identical width to the width of the wider picture.

    Do drag each image in the new file and adjust as required.

  • HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

    HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

    I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

  • A video on any website is presented in double, one on the other!

    Every time I want to see a video, any site, it is case, the screen, the video is on, shows two images from the video. Basically, the video is condensed into two, one above the other, making them wider, but I don't know why he show two!

    This appears to have happened after the last update of Adobe Flash Player. Could be a compatibility issue with Firefox, because the problem does not appear in Internet Explorer. Have not yet tried all other browsers.

    For me, it seems that the two images that appear are similar to those used in the manufacture of 3D movies, but instead view overlap them, they are displayed separately. It's just a wild guess and I have no evidence to back this up.

    PS: I also use Firefox 3.6.13 Windows XP.

    Later edit: I found a work around for this problem. Right-click on any incorrect display video and choose settings. On one of the tabs found there is a checkbox "enable hardware acceleration". It has been activated for me, after having stopped it and restart the video browser was back to normal.

  • Using laptop with an additional monitor above. To set the default appearance as Monitor 2 above 1 monitor

    I can set up my laptop with an additional monitor as extended desktop.  By going to the followed control panel display I can manually fix the default setting for the two monitors side by side, to have one on the other.

    However, every morning when I do my laptop in to work and reconnect to the extra monitor I have to redo it.  Is there a way to set the default display settings so that it affects automatically two monitors as one above the other?

    Using Windows XP Pro.  Help appreciated.

    Hi Andrew_Wright,

    Windows XP does not record the settings once you unplug the extra monitor.

    You can use some third party such as the software provided with the video driver software.

    Use your favorite search engine to find all these software for you help.

    Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Maybe you are looking for