I need acer laptop promotion of meu com ajuda aspire 5750, nao esta Tercos o brilho da tela

Similar Questions

• Acer laptop need help with keyboard

  Hello new community here. I need your guys help please. It comes to my Acer laptop is a 2 in 1.

  When I return to display completely, it gives me an option to switch to Tablet mode. I chose not

  because instead of actually use it as a Tablet im turn it over and place it on the screen just

  use the keyboard with my external monitor, but for some reason during his tours, he won't insert any

  entry keyboard at all when im using it. It's like a keyboard dead when I ' not in tablet mode, but.

  has returned all the way as a tablet. Hope you guys understand what im saying, otherwise I could make a short

  video I guess, in any case thank you in advance!

  -DjinnWraith

  Welcome, you by the way, don't give up; I sent a private message to him, then maybe you can join forces.

• Acer laptop comes with Vista and upgraded to Windows 7 now does not

  My daughter has an Acer laptop and her boyfriend spoke to him in switching to Windows 7, but we are not sure if it was legitimate. He worked for a year or so, but now she cannot access the start menu, you cannot start in safe mode and may have a virus. She has no backup discs. Any help would be greatly appreciated, thank you.

  Well, if she worked for a year, then it is probably quite legitimate. Whatever this is not activated within 30 days is usually made in an unusable state, or limited. The most likely problem is a virus. She is able to run programs? Some useful malware removal tools are:

  Kaspersky Virus Removal Tool
  Malwarebytes
  SUPERAntiSpyware
  Spybot Search and Destroy
  Microsoft safety scanner

  And it's not the Windows 7 installation disc that used her boyfriend? If you cannot use these tools or the computer is too slow and does not respond then you can use a Live CD. What you do is start you on a CD or a flash drive in a separate operating system in order to perform analyses of virus on the hard drive. You will need to use another computer with a blank CD burner and imgburn program. Write these two files .iso with imgburn.

  BitDefender Rescue CD
  Kaspersky Rescue Disk

  Turn on the computer. Insert the CD of bitdefender inside her computer. Turn off and turn on and watch directly downstairs or upstairs for command to enter the Boot Manager (usually F12) or BIOS Setup (usually F2). Is there is a Boot Manager button and then you must press the key once in a relationship at the time wherever you turn on the computer. Select this option to boot from CD/DVD.

  Is there is only one button for BIOS, then you will need to manually rearrange the order of boot devices so that the CD/DVD drive is at the top which makes the first boot device.

  When the operating system loads up, make sure that you connected to the internet and update the latest virus definitions. You can then run the scan on the hard drive. After that all viruses are removed, then do you the same thing with the Kaspersky CD. It's just to make sure that all viruses are removed.

  I hope that my explanation was not too difficult to follow.

• Acer laptop with Windows 7. Need to know how to activate the integrated webcam on?

  You want to know how to turn on the camera on my computer acer laptop with Windows 7. The webcam is built in

  Buckeyes I have the last Acer with integrated webcam and turn left click your windows icon in the lower left corner, all programs that are open, scroll down from the top for Acer Crystal Eye Webcam and click to open, and then click the same again and your we will open the cam.

  See you soon

• I forgot the password for vista on Acer laptop

  I don't remember the administrative password for Windows Vista on my Acer laptop & I DO NOT HAVE THE DISK

  Hello

  If this is not applicable, you must reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _________________________________________________________________

  To reinstall Vista on an Acer.

  You press the left ALT and F10 at startup to start the recovery process to factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• How to format computer acer laptop?

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  Hé neww

  NeoSmart disk is to startup etc repair not reinstall

  the process of acer administers the process of full recovery to the standards of the factory

  you start from the acer recovery disk to start a reinstallation of vista, back to factory standards and follow the prompts

  problem with the acer recovery process, you will need to contact acer

  It's their recovery process

  http://www.Acer.com/worldwide/support/index.htm

  Walter, the time zone traveller

• Acer laptop Vista Home Prem to Win 7 Home Prem upgrade, will be stay again drivers intact for Win 7?

  If I buy the Win 7 Upgrade kit for driving my Acer laptop from Vista Home Prem to Win 7 Home Prem, will be the drivers remain intact for Win 7 or do I have to manually look for them online?

  Hello

  you will need to go to the website of Acer and see if windows 7 drivers are available for your model and bring manually

  http://support.Acer.com/us/en/product/default.aspx

  for any repost of issues of windows 7 in the forums of windows 7

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• get a copy of Vista OEM or reinstall an ACER laptop.

  I have a situation, where I'd like to perform a recovery on an ACER laptop to restore factory settings, however I have no CD to go with it. I have a long history here, perhaps someone more familiar with laptops and Vista installation can suggest where to begin the search, or the place where process? I am VERY familiar with the repair of Windows 95, 98, 2000, and XP is installed on desktop computers, but you don't master with Vista. I also have little experience with laptops and am not sure if the laptop has a recovery partition which can restore the factory settings or if it's just a thing of emergency repair, as my investigation into what was wrong with the laptop was a little weird. I'll do a post that is a bit of a long story, but it should show my process of thought as well as my skill level. I spent

  A knowledge of my friends has recently undergone a crash of hard disk on his laptop computer, although he didn't know exactly what was the problem at the time. Fortunately there is nothing on the drive that does not saved except for the OS.

  At first glance, it appeared that the hard drive was bad, and he went out and bought a new laptop. Outings, I was informed about this and they asked if I wanted this one for parts or to try to fix it if I could.

  After receiving the laptop, I decided to check what was wrong. I tried to turn on immediately, before even to sort out the power cord, but nothing happened. He was dead. The laptop was unused for several days before being delivered to me. Thinking that was the problem, I have dispaired that I never changed a power supply in a laptop. However, for the heck of it, I plugged in the power cord and to my surprise, it started. This dead battery may be important later.

  He has been starting some sort of partition repair which gave me access to repair system I since lost access to. The thing was, when I got to the screen that says "System Recovery Options" with the "motor load' and 'next' boxes at the bottom, no OS installs were neither were all partitions.

  I got to the menu where it gave me options, with "command prompt" downstairs. I just assumed it was like the XP Recovery console and I tried to use it as such.

  They gave me a "X:\windows\system32" prompt, which I thought was weird, because it's the X drive instead of drive C. The people in question can barely use a computer, so they would not have reassigned the drive letter.

  I did dir c: and had an error on drive c. be corrupted. Also, I did a dir d: and get "file not found" that seemed weird. It turns out that the E drive was the dvd - rom, then I discovered. Other letters gave errors and invalid letters.

  I decided to start with the basics, and I used the command chkdsk on drives C and D. To my surprise, that seemed to do the trick, and after restart I was taken in the Welcome screen.

  Restart at first seemed to be a mistake, as I have since not managed to find a way to return to this menu of repair and subsequent attempts through the Vista Start menu (or whatever you call the menu that is displayed when hitting F8 these days.) Its name has changed between Windows 95 and xP) need the administrator password.

  I was to call back them and get the password from them, and I'd have to try to use one of the solutions 'password lost admin, cannot connect', I didn't know if it would be a good idea on a potentially damaged system of mud autour with registry hacks.

  At that time, it was late in the day and I had a few other things to do. I decided to start with Windows Defender antivirus scans and the tread Micro antivirus, that have been installed. He had a subscription to the microphone of the tread, so I connected the laptop to my programmer, updated definitions and performed a full scan.

  The two negative came scans, with the exception of a few tracking cookies. At this point, it was late and I was tiered, so I all stop and went to bed. I had disconnected the laptop to my switch and it sat in my bedroom next to the bed.

  Around 01:00 a.m., I was awakened by a strong and heard the WHIR of the laptop sounds beep. The computer had apparently turned on, but when I opened the file, the screen doesn't have to turn on. Think of some sort of virus or Trojan was at fault, since a disconnected laptop should be on NOT himself in the middle of the night, I hit the power button to turn it off, and he succeeded.

  In the morning, I tried to install malwarebytes and run a scan and it found several things he called Trojan horses, as well as some adware. I removed it.

  I have found it useful to keep on the laptop, and rather than to try to clean it up, I would like to reinstall from scratch.

  I looked on the internet and found that most Acer laptops should have their accessible restore partitions by pressing control-f10 or alt + f10.

  Here's the strange thing. I did, and it started working. However, I had a Windows XP startup screen and it says "Windows XP".

  The laptop is running Vista Home Premium, and there a House premium sticker product key OEM on the bottom. If the recovery partition installed XP and asks me a product key XP, I'm GROUND.

  I have an OEM copy of Vista, but it's for a 4200DX gateway. Somehow I doubt that it will help you for the upgrade of the Vista laptop. Any suggestions?

  Jumped the gun in the abandonment of the XP, need it install Vista?

  The laptop is an Acer Aspire 5570Z according to the engraving on the front.

  On the back it says:

  MFG. Date: 0706 Aspire 5570-2067

  Yes, suggestions? I could try to clean install, but it is probably better to start from scratch. On the other hand, have XP is probably a better choice, because the laptop has only 1 GB of RAM. Possibility to choose, I would choose XP on 7 or Vistafor this computer, but which leaves me with the problem of a product key.

  If the recovery partition is indeed a XP product key, is it possible that Microsoft would leave me to transfer the license from a dead Tower brand OEM copy of XP home to this laptop? I doubt that the key of this death dell sticker product could work on this laptop, but it would be worth it. I need a new key, and they could indicate the old key as invalid with Windows Genuine Advantage and refuse to turn it on.

  Suggest that call you Acer to see if they can make any sense out of it.

  Some restore partitions when launched as the emachines PC (I fixed in the last days) installed XP preactivated and no key was needed.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Product key illegible on Acer laptop

  A friend had problems with his Acer laptop, and despite my best attempts to correct them the only option left was me to perform an 'upgrade' using my own CD of W7. This is fine, but the problem started when I tried to read the product key on the bottom of his laptop computer.

  Some characters are illegible and despite trying different I can't enter a valid key. I tried calling Acer but they keep no record of product keys for customer laptops.

  So, here we are licensed legitimately purchased and cannot activate it because the tag has become illegible. Here is a picture of what it looks like. I know there is a warning not to publish product keys, but it is unreadable.

  Can anyone help please? Small due to lack of my friend, it seems that the only option is to buy another license which seems pretty unfair.

  [Image removed]

  Well, I can recognize 3 letters in the first set:

  XMT - 99 Q 67-WYMBB-9XYP9-M7GB4

  It's just the first two letters, it would be any of the following keys:

  A E I L N O S U Z 1 0

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Acer, press and hold ALT + F10, as soon as you see the logo

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

• Where can I find specifications and manuals for Acer laptops?

  I have tryied to use acer.com website to find information on an Acer laptop. I think that this site is almost useless, because I can't find a product (I click on search, but neither a result or an error is returned). I have tryied with E3-112-C658 and NX. MRLEX.001 also, I tried to search a list produscts. Couldn't find any exact product AND no accurate technical tests are provided for existing product. I downloaded a manual for a similar product and that it contains or sheet or upgrade instruction (HARD drive / RAM replacement)

  I want to know about more top model how much RAM it only supports and is easy to replace RAM/HDD (I don't like to deal with more than 8 screws for this operaon). Can you help me please?

  Another question for Acer users: are you satisfied with your products? I'm disappointed, just after I saw how 'professional' are their products and support pages.

  
  

• Acer laptop opportunity; looking for a good OS software

  I recently bought an Acer laptop from a computer retailer.  The computer model is ZG5.  Only, the computer was shipped with a power supply cord.  I don't have a backup of the operating system drive.  The computer running XP Professional.  The windows installer does not work, and I can't install or update applications.  I would like to install the operating system that should be with the computer.  Where can I get a copy of it?

  There are ways for you to recover the system, according to what was done for the operating system and a hard drive.

  First, recovery media can be acquired through the Acer online shop: http://store.acer.com/

  Second, we ship our systems with a recovery partition that allows you to reload the factory settings.  If this partition is still intact, you can use the second link above, restaurants outside of Windows, to restore the system to the original shipping charge.

  Hope that helps.

• How can I transfer my Gallery A-810 to my Acer laptop?

  I need to transfer my Gallery on my laptop.  I also want to use the SD card to store and transfer photos.  Help you enjoy.

  Plug your A-810 on your Acer laptop with the USB cable, then you can browse the internal memory and the SD of your PC with the windows default application, so you can copy and paste images.

  You can move the entire DCIM folder (where your photos are stored) from the internal memory to the card CD.

  to define the SD card as default image save the position, you need to check on the parameters of the camera app (which is normally in storage).

• Windows do not recognize the 'certificate' Acer laptop wireless signal. can, t go online? pls help.

  The wireless router from the time warner Server acer laptop says the signal is strong and is connected, but a sign comes up saying windows cannot recognize the certificate for the server? cannot go on using Explorer or mozilla lps.

  Hi trickstar46,
   
  Follow these steps to resolve the problem:
   
  a. Click Start--> programs-->--> Communications accessories-click--> select--> right click on your connection network connections and select Properties.
   
  b. click on the Authentication tab--> disable / uncheck the authentication of the IEEE 802 option. 1 x for this network.
   
  c. click on apply. Click OK.

• My ACER laptop will not start Vista

  My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to reinstall Vista on an Acer:

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.