I need help and I did everything but replace my computer and the operating system.

Similar Questions

• How to make a copy of all the software and the operating system that came stock with the laptop?

  I have a laptop that I have replaced the motherboard and now HD took a dump and should be replaced also. I need the software and the operating system disk, so I can restore the operating system to order.

  Please advise!

  This link will take you to a web document that explains how to order a recovery for the initially installed operating system disk.

  Here is the support for your laptop computer portal.

  Best regards

  ERICO

• Hard drive swapping and the operating system between two laptops of R61e

  I have a R61e who broke chassis. Not a left hinge broken, but broke up chassis where the left hinge connects.

  I have the opportunity to buy a used one with no operating system.

  Both are of type 7650 and all have two 80 GB hard drive.

  Will it work if I just reverse this HARD drive with the operating system for the new portable computer?

  Yes, it should work without major problems.

  In the worst cases, you need to update to a couple of pilots.

  Good luck.

• I have replaced my hd, reinstalled the operating system, but you forgot to activate vista. How can I solve the problem?

  After that my hd, I decided to replace it as well as reinstall Vista Home Basic using the system recovery disk, that I bought at HP in 2007. My laptop is a pavilion dv6000 with Vista 32 bit.

  Unfortunately I didn't, I had to turn my copy of vista on my pc within 30 days, since I got my pc sometimes without incurring in this issue. I tried to insert the cd in the back of my pc key, but to understand that no longer works, so I tried with the new cd key of my drive to restore but that no longer works.

  How can I solve this problem?

  gscarabel wrote:

  After that my hd, I decided to replace it as well as reinstall Vista Home Basic using the system recovery disk, that I bought at HP in 2007. My laptop is a pavilion dv6000 with Vista 32 bit.

  Unfortunately I didn't, I had to turn my copy of vista on my pc within 30 days, since I got my pc sometimes without incurring in this issue. I tried to insert the cd in the back of my pc key, but to understand that no longer works, so I tried with the new cd key of my drive to restore but that no longer works.

  How can I solve this problem?

  Hello

  Call Microsoft and tell them about this. The operating system is a version OEM and MS should help you...

• A key, but not cd/dvd for the operating system

  I received my new computer, but did not come with the operating system installed. It has the key for windows vista, but not CD... How to install the operating system

  Read the info below:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• VMware - script the creation of the vm and the operating system installation process

  Hello.

  Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

  I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

  I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

  If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

  Answer that be detailing how to proceed, or point of item/sites on that would be great!

  Thank you

  I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

  After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

• How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

  My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

  pjrl

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• Advantages and disadvantages of adding programs and the operating system windows to mac?

  For a long time Windows user., new Mac user. What are the advantages and disadvantages of the addition of the windows operating system and programs for the MacBook Pro? I use word and excel regularly, but not yet sure I want or should add capacity to my new Mac.

  If you need Windows programs that don't have any equivalent of Mac, there is nothing wrong with it.  I have not because I didn't need Windows programs.

  But...

  If you do, you must decide if you need full-system-resources (Bootcamp, boot sector corrupted system, OSX will sleep while Windows is running) or just one-environment virtual (VM, share system resources, runs as a 'guest' to OSX at the same time as OSX).  Bootcamp will have part of your partitioned drive so make sure you have spare disk space.

  And if you go Bootcamp, position and spend time in the Bootcamp Boot Camp forum where lonely T is an expert who can guide you.

• Pavilion 23-q055na: hp not pavilion no noise at all, but no error detected by the operating system

  I installed Windows 10 on a brand new Pavilion - HP 23 - Q055NA and now no sound at all.

  Troubleshooting Windows Audio will return no error, the device drivers for each of the sound systems say they are up-to-date and 'works '.

  Device-> Manager

  The inputs and outputs audio

  Speakers (Realtek High Definition) Audio Driver Date 07/09/2015 Version 10.0.10240.16384

  Audio, video, and game controllers

  -CyverLink WebCam

  -Intel (RR) Audio display: 24/10/2014 Version 6.16.0.3160 driver Date

  -Realtek High Definition Audio: Driver Date10/08/2015 6.0.1.7580 Version

  The latest windows updates were installed: there was a problem with one, a reboot loop, but after power off the computer, which has disappeared, the computer has been updated and restarted again.

  I ran the update from the HP support and had some 6.0.1.7584 for Realtek Audio driver that fixed my problem

• CS5 and the operating system upgrade to Windows 10

  I have Photoshop CS5 running on Windows 7 X 64. My operating system will be upgraded to Windows 10 in late July, through Windows Update. It will break my installation? I need to block the upgrade?

  Permanently disable before even trying! The activation system just don't like the changes made to the system, and most certainly will not work afterwards. A reinstall of the CS5 will probably be necessary anyway.

  Mylenium

• My system has been repaired and the operating system has been replaced by a non-genuine version of Windows. How do we install the real version I used to have back?

  Windows vista installation

  my computer has been repaired and reinstalled with a non-genuine version of the window. I have now the true window vista but I don't know how to do in this regard.

  I just insert the disk and follow the instructions?

  Hello

  You need to change the Boot order to make the CD/DVD drive 1st in the boot order, then restart with the Vista DVD in the drive and follow the instructions.

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• Adobe CS4 products and the operating system Windows 10

  Everyone has problems running DreamWeaver (I have CS4) or PhotoShop Elements 7 on the new OS of Windows 10?

  I do not know whether or how well former products will perform in Win10.  CS4 is too old to be eligible for updates now.  But my guess is that if it ran OK on Win 8.1, it could work with Win10.  My advice is to run the compatibility checker. Or Win10 to test on a 2nd machine.

  http://www.groovypost.com/HOWTO/check-computer-runs-Windows-10/

  Nancy O.

• I try to activate Premuim Design CS2 on a machine, after it crashed and the operating system has been reloaded

  Because the system crashed I was not able to disable the previous instalation - can someone please help me with how to do this? Thank you

  The old facility will be inconsequential because it cannot be restored in any case.  Please see the following:

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Product key for disk and the operating system of recovery

  Hi all

  My question is this - if I ordered a newly purchased set of recovery disc for my DV9700 laptop, done com with a new operating system product key? Or should I use the product key, attached to the laptop? Reason I ask is due to the couple of characters/numbers of the key product is barely understandable. I have to use the old product key, if not it means that the product key itself is stored in the BIOS or there is a set (list) fixed to the product on the recovery for key disc are compared to?

  Someone better, please enlighten me. Thank you

  Tom

  When you reinstall using HP recovery disks, it will be pre-activated key installed, you don't have to do anything

  The recovery disks must be for this particular model of Notebook, when you start the Recovery Manager it checks the bios for what is called a tattoo, the tattoo contains information on the laptop, the serial number, model number, number of motherboard, they should match the disks. Nothing to do with the VLK.

  VLK = key Volume License

  Looks like the seller tried to install Vista recovery disk no HP.

  "I should be able to use the recovery disk for my mobile dv9825nr on any other dv9825nr laoptop, right?"

  Yes

  .

• How can I put in a new hard drive to replace the main HD that crashed and that contains the operating system

  My HD C: broke down and needs to be replaced.  It contained the operating system (XP).  My other drive is OK.  I have all the original cdroms, including the operating system.
  I need to know if I should be careful what it is.

  Hello Nigel

  Each hard drive is different with their adjustment as far as riders go unless you have purchased the same exact model. Make sure that you set the jumpers on the correct setting for the new hard drive with the manual that came with the hard drive. You can also reconnect the cables of data and power supply for the reader who does not appear because they can be loosened.