I try to activate Premuim Design CS2 on a machine, after it crashed and the operating system has been reloaded

Similar Questions

• I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

  I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

  Hi Jdburton,

  Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Concerning

  Megha Rawat

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

  When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

  Hello

  See if these two tutorials to help you with this.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  "How to difficulty Chkdsk will not run at startup in Vista"

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See you soon.

• Can I use a legitimate DVD Win7 product key to activate the operating system already installed?

  I used a DVD Windows 7 Home Premium I bought from Amazon to install on 2 computers, THEN discovered the 2nd computer would not accept the product key.  I don't want to reinstall the OS and I can't seem to find a place online legitimately sell just a product key, so if I buy another DVD on Amazon, the product key that comes with it will allow the existing installation to activate, or do I have to spend a day or more to reload the operating system, drivers, programs, settings etc, just to stinking activation?

  This information is partially incorrect. OEM System Builder licenses come with a product key.

  Yes, it does not require a clean install, but because you already have Windows 7 Home Premium installed to use your retail disk, all you have to do is to change the product key, no installation required.

• I want to activate the operating system 64-bit on a new construction

  I activated the operating system 32-bit on my laptop.  My laptop is dead.   I want to activate the operating system 64-bit on new construction.  I've never used the operating system 64-bit before.

  Original title: new generation system in a few days

  As long as it is the key to detail (store bought) that was used to activate the license on your laptop, you can transfer to a new machine and reactivate over the telephone.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.

• When I try to change my lock screen wallpaper I get error saying "setting of the lock screen has failed. Please try again ".

  Original title: locking error screen

  Hello. I use Win 8 Pro x 64 and I'm having a problem affecting the lock screen wallpaper. I am the admin of the machine and Windows is activated.

  After a few days ago, Windows stopped to change my lock screen background. When I try to change it, the error is displayed on the screen:

  LOCK SCREEN ERROR

  Setting the lock screen has failed. Please try again.
  However, I can still change my profile picture and the bottom of the start menu.
  Other users of the computer can change the lock screen normally. My user account is linked to my Outlook.com account as well as others.
  I already tried the other 'solutions' out there: in doing a selective startup with msconfig, disable services applications at startup and also manually delete the folder "C:\ProgramData\Microsoft\Windows\SystemData". Needless.
  I also have the feeling of other users on the web: it's somehow connected to some Windows updated published these days.
  I would appreciate any help on this matter.
  --
  André
  E-mail address is removed from the privacy *.

  Hi, Tadasha. Thanks for the reply.

  In regards to KB 2770917 updates, I already installed it on my Win 8 as well as others (I keep the OS always up to date). So it has not really helped but thanks.
  On the tip of the gob0nkers is not really the case here, because I don't want to set a wallpaper of single lock for each user (in fact I had already read his answer to the question of ch). So far I have found no article on the web by offering an effective way to work around the problem.
  What I've done: created another user profile and abandoned the old (who introduced the problem). I think that it is related to the file the user AppData or something.
  So far things are working well with the new profile of the user.
  Thanks for the help!

• Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start texxto tool says the following error message: could not complete your request because something prevented the text engine has been started.

  Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start the text tool says the following error: could not complete your request because something prevented the text engine has been started.

  Go through the Troubleshooting Guide to solve this problem

  Troubleshoot fonts | Photoshop CS6 2014 CC, CC, CS5

  Error text engine using the type tool in Photoshop CC | Windows 8

• I can't activate the operating system on my Satellite A305-S6857

  I have laptop Satellite A305-S6857.

  A few days ago my computer did not work well.
  So I did format and reinstall the Vista trial version because I lost my CD of vista.

  Then after I tried to turn on but did not work. I put my product key at the bottom of my computer.
  I'm really horrible at the computer.
  Now, I can't use my internet and everything.

  because I don't know where are the driver files. Can someone help me?

  Tell me where are the driver files and why wasn't my product key.

  The button on the underside is not a kind of universal key and it will not activate your Vista. This key belongs to the recovery image, that you got with your laptop. If you use the Microsoft CD/DVD facilities, then get the original key. If you don't have it you can activate it online.

  Before that, configure all hardware and internet access. All the drivers, tools and utilities for this model of laptop you can find on US Toshiba support page - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

  Check it out!

• "There is a problem with this Web page, so it has been reloaded. Try using the Duolingo Web site.

  I recently started to get this message when I try to do exercises on the site Doulingo.  The site loads up to the time when I hit enter to begin an exercise then I get the exact massage indicated above to the upper left of the Safari screen, same thing happens with Chrome.  It only happens on this site and only when you ask for an exercise.

  I tried all the usual suggestions: compensation historic site and the data, a complete reset of the iPad reboots, stops.  So far, nothing works.

  I use a mini iPad 1st Gen with iOS 9.2.1.

  In my house I also got an iMac and iPad 4 and do not have this problem with these devices, it seems specific to iPad mini.

  I have the Doulingo app and it works, but does not offer the same functionalty than the Web site.

  Hi FrenchApples,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having such problems with Safari on your iPad. If you continue to have problems with this specific site, you can find the troubleshooting steps in the following article useful:

  If Safari does not load a page or a page Web elements are missing - Apple Support

  Concerning

• Delete/reformat the drive hard partition (s) to activate the operating system reinstall

  I have a HP 2000 2b09wm. He just broke, gives me the error message saying in that I needed a new hard drive. Suppose the old went kaput (even though I bought this pc on eBay not a month or two before). I have a new HD and a Windows 8 reinstall the software from a dealer on eBay. I tried several routes to try to reinstall the OS, resulting in many dead ends *. I asked the dealer to help, but did not get much. The last thing he offered was to remove the partitions in the new HD. I looked at a page eHow, how to remove Partitions on a hard drive. It is said to get a CD which includes fdisk.com. I burned super fdisk (2 MB) of SFbootablecd.iso and fdisk (40 MB) of fd11src.iso. I went into the BIOS to set the boot order. I put the saved first, CD/DVD-ROM internal drive and tried the two CDs. It always starts with just a screen with this:

  Not found boot device
  Please install an operating system on your hard drive
  Hard drive (3F0)
  F2 System Diagnostics
  For more information, please visit: www.hp.com/go/techcenter/startup

  I even tried to put the CD/DVD ROM USB drive first... same results.

  So my questions to you, I guess, is first of all, why the CDs fdisk is not start? I burn the evil fdisk? Second, do you know why my OS couldn't be installed using the software to reinstall? The guy I got it (http://www.ebay.com/itm/181524428825?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) , verified_computer_specialists, has excellent comments, so I guess that the software is legitimate and the computer is actually original with Windows 8.

  Thank you.

  * A couple of the streets:

  Compatibility report - the computer has started using the Windows installation media. Remove the installation media, and then restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. Do not select [Advanced ICustom] I do a upgrade. [Advanced ICustom] I install a new copy of Windows and deletes your programs and settings.

  Another path to the Windows installation, I get this: select the driver to install: browse folder - access the driver and then click OK.
  It gives you the list under 'Computer' which includes "CD drive (E HRM_CCSA_X64FRE_EN-US_DV5)" (resettlement software) and below, support records - sources of boot - efi --.
  Simply choose drive E itself, the message appears: load a driver: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.

  Enter the BIOS and disable Secure Boot-enable Legacy boot, save & exit. Try to boot again from the disk Win 8.

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• My computer crashed and the installed drive will not activate / validated.

  My computer crashed and installs it is no longer the original disc, which I've used for many moons. I have a backup disk and use it when necessary.

  The authentic backup drive was activated and validated several times over the years without any problem. I tried to activate/confirm this same disc for more than a week with no luck at all. I have about 18 days before it runs out. There are several products, I need in charge of Microsoft from the bottom but cannot

  because they say that my product code is not valid. It makes no sense to me. Why Microsoft does not record the best or not be so fussy on a BONE

  they say will be obsolete before too long! I would really appreciate help with this and I hope someone has a good answer. I can't buy another disk drive!

  Greetings

  Ken

  Thank you for your answer but I tried several times and when I called the number that I got I got an automatic response and were never a person.

  The trick is not not to follow the guests. If you hold long enough (about 5 minutes), you should get a real person.

  Another person had success by repeatedly pressing the key #:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/i-am-unable-to-reach-a-live-person-by-called-phone/09f6c883-3bc7-42FA-B510-3ad9a7f4d260

• I can not cs2 to activate because the activation server has been taken offline.

  I bought CS2 but rarely use it.  Recently, I tried to start the program and was asked to turn on (re-enable) the software.  I got the serial numbers, but the online activation service is no longer available.  I googled the problem and think somehow Adobe is providing serial numbers or otherwise try activating the software to operate, because he was already paid for...  Any directive or the entry on how to solve this problem would be much appreciate. Joe

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• I try to install Production Studio CS3 so that I can use Ultra and the internet link to activate the product does not, nor is the work of phone numbers. How do I activate the product, so I can use it?

  Does anyone know the process of activation of a very old version (CS3)? I want to use Ultra and AFAIK, CS3 is the only version that works with.

  If someone can tell me how to use Ultra, which was delivered with version CS3, with CS5.5 or CS6, I would be grateful.

  Thank you

  Check your hosts file.

  to get help who and more info on the possible causes of the problem you encounter, errors in Sign, activation or connection. CS5.5 and later, Acrobat DC