I need help serious as everyone seems to have / had this critical issue before.

Similar Questions

• I really need help serious to import again

  OK, I'll start by saying Iam a newbie total and complete this field.  I have made a few small projects first and again but nothing advanced so far.

  Here's what I did

  • I use CS04 Suite
  • I built a first project using video AVCHD which is long (about) 2.5 hours
  • I exported the final project using SOUL to the H.264 format so I could import into Encore
  • The file is 16 GB in size

  I try to import the file as an asset in again to create the menus, I need to create 2 images in still, a DVD image and 1 Image Blueray.  I'm doing the image of the DVD at this time.  Still allows the import, shows the video in the list of assets, but my hard drive works like crazy for three hours now, I can't drag it to the timeline, if I click right I can not even access the setting of transcode the file, my system is very slow.  It almost seems that it is pre-transcodage but I don't see any progress anywhere bar.

  • Is still just importantly the file?
  • I am doing this correctly?
  • Should I break to the top of the video into smaller files? Can I create several Projectes first to do this?
  • If I wait long enough will he be ok?

  I have 6 days to finish this project... I really need your help!

  A hard disk will not work well for the SD video and certainly not for HD video

  A link with a lot of ideas on the computer to install http://forums.adobe.com/thread/436215?tstart=0
  And even more discussion material http://forums.adobe.com/community/premiere/hardware_forum
  Including this message about 3 possible builds http://forums.adobe.com/thread/598040?tstart=0

  You need at LEAST 2 hard drives, one for OS and software and all data... and a lot of people use a 3rd drive for temporary files "scratch."

  These are separate, physical hard drives... NEVER of partitions on a disk

  Work through all the steps (ideas) at the http://ppro.wikia.com/wiki/Troubleshooting
  If your problem is not solved after following all the steps, report accurately the requested in the section, the questions at the end of the troubleshooting link... especially the codec used... See Question 1

  You have already given the type of file... all the other information is good also

• Windows update error 8000b 0100 need help serious

  I have a x83vb from asus with WinVista SP1 64-bit and every time I have try to launch an update that it gives me Windows update error 8000b 0100 and ive tried system, Ive update readiness tool used the fixit now normal and aggressive, ive run manual updates, ive used CMD promt to register the .dll files unsigned , ive tride performs updates without the firewall, and ive tride reinstallation of windows and make back to updates previous it is gettig really boring especialy because I can't even upgrade to vista Sp2 can someone help me please

  Hi Markuskain,

  Without the logs that TaurArian asked at the base only troubleshooting steps that we might suggest would be these two:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  http://support.Microsoft.com/kb/971058 (make sure of course when running this tool, you run it in aggressive mode)

• I need help my identifying Apple is disabled have changed my password so many times with no luck

  OK I would really appreciate it someone could possibly walk me through access to my Apple ID, I've set up security issues, I answered them correctly I have only my password change my password several times and then it comes back automatically to your identifier is lockedbut when I go to my iPhone app to find , there no State is disabled and I need to click the link to reset password again once I miss passwords basically I don't know what else to do and I'm getting frustrated thanks

  This is considered as shouting, font size normal use in your next posts.

  Look here:

  https://iforgot.Apple.com/password/verify/appleid#! & section = password

• I need to create an association, in the control panel of the associations set to open a .i file seems to have lost this program to do?

  Could not open a file, the message came, I need to create an association in the control panel be greatfull advises you on how to do this thanks Brian Jones.

  Hello

  What is the file extension?

  You must have this program installed to open this specific extension

  If it's a file .doc, you must have Word installed

  If a .xls Excel file must be installed

  etc.

  read this:

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• my laptop has built in webcam, but I can't find this need help where is it? I have a compaq CQ56 PORTABLE presaio

  I HAVE A COMPAQ PRESARIO CQ56 LAPTOP WITH BUILT-IN WEBCAM DOES NOT. WHERE CAN I FIND THE WEBCAM? IS THERE A BUTTON ON THE LAPTOP KEYBOARD THAT I SHOOT? IF SO WHAT SYMBOL IS IT ON THE KEYBOARD? THANK YOU APPRECIATE ALL THE HELP

  Read the help files for HP or HP support or HP forums site

  The webcam is provided by HP, not MS or win7

• I have just reset my MacBook Pro.  I need help reinstalling my CS2.  I have the serial number, but not the disks hard reinstall.  I know it's a very old version, but I want to reinstall if I can upgrade without having to buy this product again.  WHA

  Please help me.

  Hi Anne,.

  Please try to download the CS2 from the link: other downloads

  Hope that helps!

  Kind regards

  Sheena

• Need help to remove malware dfrgsnapnt.exe have found solutions on the internet, but do not know if they can trust.

  Recently, my PC started to boot the system & web surfing very slowly, making me suspect a virus. I found this file on my computer (dfrgsnapnt.exe) running Microsoft troubleshooting, but have not spotted on my C: drive again. Did a quick search on the internet and learned that it is malware. There are patches and downloads of free software on the web, but I don't know which ones is safe!

  Hello NoBen,

  Please read this article, it contains all the information about the malware troubleshooting
  Fix Firefox problems caused by malicious software

  Just reply back to us.

• Need help on how to do not have ordered originally cross 0 linear general help made

  I have data him consists of a single column of values y and several columns of x values.  I want to do is re-create an excel spreadsheet calculation in Labview.  The excel sheet by using the LINEST, however the intersection point is calculated normally (const = true).  I have read through the forum and found that I can use the vi made linear general for my calculations, but this vi obliges the zero intercept.  It there a way in labview for editing like this is done in excel?

  Try adding an additional column in the data table that is all the 1.

• Need help installing Windows XP, now I have Windows Vista installed.

  Original title: changing from Vista to XP.

  Good, so I have a computer with Vista on it, and rather than upgrade to 7 or 8, I was wondering if it is possible to put XP Professional out there.  anyone?  anyone?  Bueller?

  Hello

  Go to your computer / computer laptop manufacturer Web site and see if XP drivers are available for your make and model computer / laptop.

  If this is not available, XP does not work for you.

  If XP drivers are available, then buy XP and clean install.

  Microsoft sells more than XP.

  See you soon.

• NEED HELP! HP Pavilion p6714y new PSU POWER & Graphics card issues

  I want to update my PC for games like HomeFront and the series Battlefield. I currently have a 250 Watt POWER supply and a Nvidia GeForce 6150SE integrated... what would be my best bet to replace these? I have about $300-400 I can pass. Any suggestion would be great. Thank you!

  Hello

  Isidor wrote:

  I want to update my PC for games like HomeFront and the series Battlefield. I currently have a 250 Watt POWER supply and a Nvidia GeForce 6150SE integrated... what would be my best bet to replace these? I have about $300-400 I can pass. Any suggestion would be great. Thank you!

  PSU: all Corsair 450W or an OCZ MOdXstream Pro 500-600W should be below the range of $100.00 (Newegg.com)

  PCIe - x 16 video card

  Radeon HD5770 or HD5750, both are specifications of directX 11.0 and can play virtually any game currently on the market.

  NVIDIA GeForce 9600GT

  Best regards
  ERICO

• would have been said, that I threw my product key when I threw my box after buying my computer need HELP to activate my programs... is this possible without the keycode?

  Is it possible to recover the product key password without having to buy one for $125 to? Program Windows 7

  If you threw the box of MS Office and you had not activated Office you have learned an expensive lesson.

  I suspect that your new PC has made a preinstalled Office trial and you then installed the version of office that was purchased, and it has not been activated, so its key is not registered on your system

  If you have received for your purchase of MS Office there may be options.

• My model of the ATV MD199LL/A will without stop.  I need to unplug it.  I've always had this problem

  My model MD199LL/A ATV occasionally stops not with the remote.  What could be wrong?

  It has always been like that.

  The Apple TV is not cut, will switch "standby". You can manually go into the settings - SLEEP now or press play/pause on the remote control for 5 seconds. If there is a problem with that, then you need to develop on what's happening.

• BlackBerry Smartphones need help with the word base to use

  I tried endless forums on help to use the basic features of the Doc to go to search. everyone seems to have a problem PDF, attachment problem or another problem of advanced feature, I can just transfer my Word documents on my blackberry and view them. From DataViz Web site had no answer for me.

  I have a BB storm, with VZW, using the most recent 4.7 OS it is a personal phone, so don't think it's a problem of BES.

  I'm not very Savy BB, this is my first phone which does more then call / SMS and I'm sure I've missed a step somewhere, it may not be difficult to get a word in my Storm doc and visualize it.

  I used the Desktop Manager to transfer documents word on my storm, I transferred to the default documents folder.

  I also tried drag-and - drop file to my blackberry just using my PC.

  also, I tried to send me an email and download the attachment.

  I can get the files from my storm, when I go to the media and to "explore" I can see the files, but I can't open them, according to the extension, it is said, is not an RTF file or unable to display file/Media card/blackberry/documents/""".wps

  And when I try to access it directly from the Word go, it appears same.

  Am I missing something?

  Any help would be appreciated, I think I'm missing something or I missed a step somwhere.

  If someone can share with me a step by step how to send a word document (what to save it under) for my blackberry (where to put) and in fact he discovered (where to go) would be great.

  also I missed something permissions? I set everything on Documents to go to 'allow' and reset the firewall.

  Hello and welcome!

  Looks like you do everything right. I just sent myself a doc word opened the email and who launched Word to Go. I then closed and saved and can be found only through Media-Explorer or by first launching WordToGo and then open it. So it seems that something is wrong with yours.

  First thought - there was an update for Documents To Go... the current version is 1.006 (052) - find who spear one of the applications To Go and then open the menu (button BB) and selecting "about...". ». If you are on an older version, first advice is to get the update (another selection in this menu). Then try again.

  Second thought - which version of Word? I noticed my WordToGo talks about reading through Word2004 (I think they mean 2003). If you try to use a document of 2007 (.docx), it might not work.

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.