Need help to remove malware dfrgsnapnt.exe have found solutions on the internet, but do not know if they can trust.
Recently, my PC started to boot the system & web surfing very slowly, making me suspect a virus. I found this file on my computer (dfrgsnapnt.exe) running Microsoft troubleshooting, but have not spotted on my C: drive again. Did a quick search on the internet and learned that it is malware. There are patches and downloads of free software on the web, but I don't know which ones is safe!
Hello NoBen,
Please read this article, it contains all the information about the malware troubleshooting
Fix Firefox problems caused by malicious software
Just reply back to us.
Tags: Firefox
Similar Questions
-
IPod touch 6 is compatible with speaker portable juiceblock. Have tried looking on the Internet but cannot find a Yes or no. Thank you
Yes. This
D5U http://www.Amazon.co.UK/juice%C2%AE-square-Bluetooth-portable-speaker/DP/B00J2S3
says:
- Compatible with most devices with the A2DP Stereo Bluetooth®
and this profile is supported by iPod
-
My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.
Hello
1. you remember to make changes to your computer, after which the issue started?
2. do you have a cable or a wireless connection?I would recommend that you follow these steps.
Step 1:
Test the issue in safe mode with network and check if that helps.
Step 2:
Configure the connection to obtain an IP address automatically.a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "b. right-click on the network connection, and then click "Properties".If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".e. click 'OK '.f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".h. click on 'OK '.Step 3:
Follow the steps in this article and check if that helps.
Why can't I connect to the Internet?
Steps are also applicable for Windows Vista.
-
Have a folder called HP updatedatfix, but do not know what it is in Vista
HP updatedatfix file
I have recentally stumbeled on a mysterious file on my HP (c) drive. the file called: "updatedatfix". It is a text document file that reads:
2008-11-14 03:04:04 starting the program
2008-11-14 03:04:04 SetNameSecruityInfo to C:\Program Files (x 86) \Hp\HP software update returned 32008-11-14 03:04:04 program came out with 3
2008-11-14 03:04:13 starting the program
2008-11-14 03:04:13 SetNameSecruityInfo in c:\Program Files (x 86) \HP\HP Software Update\ returned 02008-11-14 03:04:13 program ended with 0
09/06/2010-15:54:41 program start
09/06/2010-15:54:41 process hpwuSchd2.exe was found and ranked. Result = 109/06/2010-15:54:41 process HPWUCli.exe was found and ranked. Result = 1
09/06/2010-15:54:41 HpuFunction.dll process was found and ranked. Result = 1
09/06/2010 15:54:41 SetNameSecruityInfo to c:\Program Files (x 86) \HP\HP Software Update\ returned 009/06/2010 15:54:41 program ended with 0
09/06/2010-15:54:51 starting the program
09/06/2010-15:54:51 SetNameSecruityInfo on returned 12309/06/2010-15:54:51 program came out with 123
Any idea on what I do with the file? Or do I just let it be.
Thank you
Colin
Hello
as it says contact HP Support HP for more information on this subject
http://WWW8.HP.com/us/en/contact-HP/contact.html
or ask their support forums
-
MPMiniSigStub.exe has just appeared in the E: drive - do not know how or why
Hello
I just noticed a new folder in my E: drive I don't create, called 14442a029a6ced39ab27dda8ac. In this folder is an application called MPMiniSigStub.
I had a glance around this forum and others on the web, and I understand that it is something to do with the Microsoft security updates, etc. Most of the places mentioned that she has to do with Microsoft Security Essentials. However, I have not installed (I use Avast 5.0).
My laptop is Vista 32 bit SP2. I use Windows Defender and Windows Firewall. I also Avast Anti-virus duration and Prevx 3.0 (limited, free version).
I would like to know if there is any reason to worry about this new folder, and demand would it not wise or foolish to delete?
I would like to know if there is any reason to worry about this new folder, and demand would it not wise or foolish to delete?
It may be a virus masquerading as the real program, but on the other hand, it might not. There will be NO problems if remove you it.
-
I have adobe acrobat dc and I'm able to edit PDFs etc. in this program. How can I add a signature to be able to attach to the document?
Thank youIn 'Fill & Sign', there are only 2 registered entry. When you want to add a new one, than that you should remove one of the former.
-
Maybe I'm missing something but I don't know how to install Lightroom on my laptop.
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Download and Installation Help-
-
How can I find where to re install my lightroom 5 after that of the United Nations, I installed...
You can download LR5 through the following page:
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
-
Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it.
Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it. I have Mcafee and windows Defender, but the two do not detect. It keeps poping up of fake messages and prompts you to buy some fake antispyware.
Hello
Windows Defender system is a fake antivirus, a scam to force you to pay for it, while it has no advantage at all.
Remove Windows System Defender (uninstall Guide)
http://www.bleepingcomputer.com/virus-removal/remove-Windows-system-DefenderDownload malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
--------------------------------------------
Here are some free scanners online help if needed:http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Reinstall vist on my pc says I need a disk to reinstall on the pc, but got not one I can do
lost all data on my pc it says now I need a disk to reinstall on the pc but does not got one I can do
Hello
Here are the different ways to reinstall vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
Save all data, because it will be lost, do the above
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Just lost my C drive. I have a serial number of product code of the card, but do not know how to do this
Download from Download Adobe Acrobat products. Standard, Pro | DC, XI, X
Install and enter your serial number.
-
Hello
I'm following link below to show/hide my columns dynamically. See "formatting of column.
http://docs.Oracle.com/CD/E12844_01/doc/BIP.1013/e12187.PDF
According to the doc element can be made in private/public.
<items type="PUBLIC"> <item> <name>Plasma TV</name> <quantity>10</quantity> <price>4000</price> </item> <item>
And even can be used to hide the column with the help of State
<?if@column:/items/@type="PUBLIC"?>
MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?
Here's the part of my XML code that I use in the definition of the data to RTF.
<group name="GH3" source="QH3"> <element name="COLUMN_HEAD3" value="COLUMN_NAME" /> </group> <group name="GH4" source="QH4"> <element name="COLUMN_HEAD4" value="COLUMN_NAME" /> </group>
I'm out like that.
<LIST_GH3> <GH3> <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3> </GH3> </LIST_GH3> <LIST_GH4> <GH4> <COLUMN_HEAD4>XYZ</COLUMN_HEAD4> </GH4> </LIST_GH4>
In order to use the logic according to the oracle document I want output like this.
<LIST_GH3 type="PUBLIC"> <GH3> <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3> </GH3> </LIST_GH3> <LIST_GH4 type="PRIVATE"> <GH4> <COLUMN_HEAD4>BLANK</COLUMN_HEAD4> </GH4> </LIST_GH4>
Should what changes I make in my XML to get the result of the execution as above? Help, please. Where should I make changes in the XML above? Name of the Group? Name of the element?
I intend to use it under condition in RTF model to hide the column, but do not know how to set the column as PRIVATE/PUBLIC type in the XML output that is used to populate the data in the RTF while running.
<?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
Kind regards
Patricia K.
Hello
Problem has been resolved. I used the value of the item to determine whether to show it.
Kind regards
Patricia K.
-
need help to remove kkash virsus
Why can't, I need help to remove the worm kkash/Rodolphe that divert my laptop used I would even turn on windows I would think MS essentials would protect me
Hello
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement." I thought I deleted the program, so I can't seem to be able to throw. I have a MacBook Pro OS x help, please.
This message comes from Adobe Reader; Launch the Reader application and accept the EULA.
-
My MAC crashed and I had fixed. Problem is the guy who fixed it, he wiped away. Can I re-download my previous version of Photoshop Elements (11)? The next problem is, I have to do from the internet bc my HDD is screwed. I bought an external disk for her drive, but that won't work either. Any help is appreciated. Thank you.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
Maybe you are looking for
-
I had a book (photo album) ready to order, but I was asked repeatedly to change the lay-out of some pages. It seems that it is not possible for example to open picture frames. I do it because I put a picture in the background which will then be bette
-
Can't scan at all &; printer freezes my laptop is turned on more than 3 minutes?
Can't get my Laserjet M1212nf MFP to scan anything at all, it freezes as my laptop, if it's on more than 3 minutes. I connected via the USB cable to my laptop Dell under Windows XP SP2. I tried to run the diagnostic tool, but it freezes and then gi
-
I have Windows XP and everything was working fine until a virus uninstalled the driver vga which govern the game of hi-def images. Now it will not play hi-def correctly. I get the message on the screen "this application requires direct draw accelerat
-
Why my computer wanting never dick perfom acheck had us than before
When I started my computer got a message that he needed a check disk or I could cancel it by pressing any key and the time allowed to type the key increasded each time? I have never received this message >
-
How can I create a win7 boxfiles boot disk
I pre-ordered Win7 when it was first released. I still have the files on my hard drive and I would like to put them on a startup disk. Can someone tell me how to proceed? I found something on 'My Digital life' which is supposed to be instructions,