I need help to change my settings

Similar Questions

• need help to change the settings for a secondary computer by using outlook express

  I have 2 computers a desk where I use every day to get my outlook express emails and a laptop that I use only when I travel

  the laptop I want to only receive the express last outlook emails, not list the history of them when I click on receive

  How can I go and reset the laptop to that of new emails in outlook express

  Thank you

  Tom

  You must leave a copy of messages on the server checked on one or two machines.

  Tools | Accounts | Mail | Properties | Advanced - uncheck: leave a copy of messages on the server.

  If you want to ride a few days, but not always, leave the option checked on both machines, but on a single computer only, check for delete after X days.

• My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-in - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.

  My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-ins - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.

  Hi Rebecca,.

  You should get in touch with our accounts team to work a solution to your problem. Drop them a note at: contact us | Adobe Business Catalyst

  Cristinel

• need help to change my macbook pro hdd

  Hello. need help to change my macbook pro 13 "mid 2012 hdd. witch HDD I buy 1 TB 7200 RPM 2.5 witch should I choose sata2? or sata3? If you know any suggestions, it would be really appreciated. And when I add the new hard disk can you restore with lion at el capitan?

  Thanks for the help.

  A 2012 MBP has SATA 3 connectivity.

  If you want to install a new HARD drive, the best approach is to clone the new from the old HARD drive.  It will duplicate the original HARD drive which has likely El Capitan installed.  I suggest to use Carbon Copy Cloner to the process.  It is not free, but worth it because you can use it to create a backup disc drag.

  Here's the Setup instructions for your MBP:

  http://eShop.MacSales.com/installvideos/macbookpro_13_unibody_mid12_hd/

  Ciao.

• Dear community, I need help to change my email and rescue security question

  I need help to change my email of relief. First of all, I don't remember my Security Question. Second, when I click the reset security question and no email has been send to my email of relief. That's why I need help with these two questions

  Unless the email in a spam filter, you have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (137729)

• Need help to change sequence?

  OK, so I was in a rush to editing and when I realized after I finished my project that I had first imported music instead of a clip so my source settings are confusing. Basically, I wanted to see if theres a way for me to import my project as a whole into another sequence so my source settings will be correct... any help?

  Change the settings of the menu bar sequence > sequence... If you are using the latest version of the body

• Need help to change plan CC to Photoshop only

  I bought CC membership for a year in December 2013. As I almost never need to InDesign or Illustrator, I would change my order to Photoshop (and Lightroom) only. I find very confusing online account management. Is there a number I could call? Or another way to get rid of the software I don't need, and I did not re-for my one year subscription end?

  Cancel your subscription or membership. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Need help to set my settings

  I have Firefox 13.0.1 and since the update it has problems loading Web pages. So I read in the forums and one made my system working again. It's when you reset all the elements of "network.http" in bold. Problem is when I do and then I will and start jumping all over the web, changing the settings. So I have to put it back again.

  How to set these parameters so that they do not change?

  If you do not keep the changes after a restart of Firefox or otherwise see then:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

• Need help to change the admin settings

  I bought a used dell optiplex 755 from a local community college and need to change the admin settings so I can download the programs and files because it deletes every time on restart.

  Do you a big favor and restore the computer to its factory settings.

  See: http://www.dell.com/support/Article/us/en/19/SLN291879/EN

  If for any reason that does not work (for example, the school removed Dell 'restoration' software), go to the Community College of the it Department and ask them nicely to restore the computer to a functional State.

  NB: If after restoring to factory State, you have any software "free trial" - any software particularly virus - be sure to uninstall.  The free trial period will have expired for a long time and the presence of antivirus software, even if idle, can cause a lot of problems.  Most of the antivirus software requires special removal tools provided for free by the Publisher of the antivirus software.  For example:

  https://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

• Need help to change the security settings on my computer.

  My computer does not allow me to download anything this either on the net say security settings do not allow this file to download what should I do to change this?

  What browser are you using, Internet Explorer, Firefox, or Chrome.

  If its IE try this: in IE > tools > Internet Options > Security tab > select Reset all default level areas.

  This should reset the security settings and allow you to download files.

• Need help to change the default output page WebHelp

  Hi all

  I use RoboHelp 10 and try to generate a WebHelp output. I'm unable to change the default value, the destination page. I checked all the relevant discussions in this forum, but I still have the issue.

  I want my default destination as 'introduction' page in the webhelp output. So I point the "introduction.htm' in WebHelp settings by virtue of the"output folder and Start Page"as shown in the below figure and"record and produce ".

  

  The generated output is always taking me to another topic as shown in the illustration below.

  

  The URL in the address displayed correctly, but the subject does not change. I need someone to help me solve this problem.

  Thank you!

  Hello

  The name you specify is the start of production, not the topic file that is responsible: the file used to launch help.

  Go to content categories, choose the category and select the 'default'.

  Take a bow

  Willam

• The speeds are horrible!  need help with the best settings.

  I can't not significant with my internet speed (less than 1 Mbps in the speed test).

  These speeds are intermittent.  Sometimes - but rarely - I get much higher speeds I have pay for.

  My provider is Time Warner.  I have a time capsule tall which is 1 year old.  I also have an old flat capsule which is a wireless extension, as well as a newer airport express (flat type) and an airport express that plugs on the (old) wall as extensors as well.

  I called Time Warner repeatedly.  They have sent people twice and messed around, but the problem persists.

  I started think maybe it's time Capsule.  (I tried my old mac into the router directly - wiring because it has an ethernet port - but it would not connect).

  I don't know a lot about what do all the settings, so I have not messed with a lot (even if I tried to change the renew the DHCP lease for 1 hour instead of 1 day).

  Could give me an idea on the best settings for a time used as wireless with extensions Capsule?

  Is it possible that my older Extenders slow down things?

  Thank you.

  It is usually best to start from scratch.

  This modem do you have? Brand and model please.

  Simply run the TC... measure speeds... by wireless and ethernet and report.

  Run the TC and the new express... (much better than GEN 1 or 2... TC equal but gen3 gen4 TC is greater than the express new).

  In airport utility watch connection speeds. It shows the speed of connection, if you place your mouse over it.

  Slow links will cause worse problems on the line... Make sure that all the repeaters (wireless extensions) get at least good signal...

  Please give numbers and the screenshots as it helps no end.

• Need help with the keyboard settings

  Hello!
  I don't know how to change my language of keyboard in German again. I couldn't find a control panel. Sometimes I could rely on certain combinations of letters incidentally, and then the keyboard is changed. Can anyone help?

  Hello

  ALT + SHIFT key combination changes between two or more input configured languages. Check the settings under

  Start > Control Panel > language settings regional und > languages > details and there you can set the default input language.

  Good bye

• Need HELP to change the NAT type to open on Linksys E2000.

  I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?

  Follow the below mentioned settings, then check.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box.

• Need help to change the background and more

  Hey everybody! This is my first post on this forum so excuse me if its not very good.

  Now, at school, we experience a realization project and I and my group want to impress the teacher really a lot of movies. We decided that our film will be defined on a boat on the way to the sink, and before it sinks you get to know the different families/people on the boat and how all this turns out to these families when the boat begins to sink. But the problem is that we don't have a boat. But I have after effects, and a normal size sheet that is completely blue, which can be used as a blue screen!

  I know how to chroma key easily, but some scenes are in need of a big blue screen we have
  So I spent a few hours now looking for a tutorial on how maybe change the background without anything like a blue screen , but I can't seem to find a good tutorial that helps me with what I want help with.

  E.g. one of our scenes are cars climbing on the boat and the blue screen is not big enough to cover the entire car and the Earth under our car is gravel, and I can't have that. So is there anyone here who knows a few videos on the internet that could help me, or a kind soul who could write me a text tutorial on how to do this?
  / Friendly, Axel.
  (btw I'm Swedish so excuse for bad spelling/grammar)

  There are many times when a green screen is not wide enough to cover all the material. You end up using a combination of green screen and Rotoscoping. In your car drive you to the boat example would position the blue screen before the blue screen was behind the windows of the car because that would be the most difficult parts of the car for Rotoscoping in hand. It would be easy enough to rotoscope the wheels and underside of the car.

  Take a look at this video from Lynda.com - a really great source after effects training. It will show you how the various masks are used to clean up a green screen when it does cover the whole.

  There was a lot of publicity for Singapore Airlines called Across the World who had an actress works continuously with a shot that she moved seamlessly from San Francisco to Paris to Venice and across transitions, she walked in front of a green screen that was just big enough to cover here head and shoulders because it is very difficult to rotoscoping hair and hands when they move. I took a quick glance for the behind the scenes video that was produced when they initially released the commercial but couldn't find the exact. If you look closely in this video, you will see people moving green screens around as she walks.

  This technique is still used on hit movies. Note here the green screen that does not hide the bottom of everything, just the parts that would be very difficult if not impossible to Rotoscoping.