I need help turning off my microphone

Similar Questions

• I need help, turn off the internal mic

  Please explain to me as I am 5. I have a headphone (with mic jack and Jack audio input type). Whenever I plug them in, however, the computer decides to use the internal microphone instead. Is it possible to switch off my internal microphone without turning off sound settings (given that my headset in would appear under micro)?

  I'll try to look in the Device Manager to see if it does not show two microphones.  If so, you can disable one of them.  To get the Device Manager, click Start and right click on computer, then click Properties, then Device Manager.

  Good luck.

• How to turn off the microphone on an iPad Pro 12.9 H

  How to turn off the microphone on an inch of iPad 12,9 Pro

  Settings - Privacy - Microphone - disable each app

  Not sure that there is a global setting.

• I can not turn off the microphone on Satellite p100-194

  No matter what I do, I can't turn off the microphone of shit, he's always watching on my speakers, I have all the right settings in the sound control panel... believe me!

  Does anyone know how to disable the security...

  * monitor on my speakers even when I uninstalled all the sounddrivers! ... * it seems to be a bios problem... HEEEEELP!

  is there perhaps a bios fix?... or no solution at all on this model, I use win 7 32 bit...

  Hi leon-k,.

  Usually, you can cut the speakers in the Windows sound settings. Go to control panel > hardware and sound > sound.

  Now, choose the recording tab as Akuma written and click Properties > listen. On this tab, you can change the volume and disable the microphone set.

  Check this box!

• How to turn off the microphone for sony hdr-pj260v

  How to turn off the microphone for sony hdr-pj260v

  Hi dstrakal,

  Option to disable the built-in microphone is not available in the camcorder. However, the camcorder has an input jack to connect an external microphone, there are two possible solutions for this:

  1. Connect a microphone with a switch ON / OFF the microphone on the camcorder decision-making. Then, set the switch to the external microphone to the OFF position. This will disable the microphone on the camcorder.
  
  
  2. Connect a dummy stereo mini plug to the microphone on the camcorder Jack.

  If my post answered your question, please mark it as "acceptable Solution".

• Help needed to turn off

  Hello.  I loaded PSE8 earlier this year and used a few times with success.  I have not used for some time and now may not seem to access, is no longer an icon on my computer to start.  There are files on the hard drive (sorry I not am not very computer savvy) and there is a folder called "Photoelementsfileagent.exe" but if I click on that it brings up a black box with a text that says "Adobe Active File Monitor Service started.  I had an idea that I could load the disc again and maybe it would repair all that seems to have disappeared, but it took me down the road to uninstall the program.  I stopped because I can't access the program to disable everything first.  Now I'm stuck.  I can't open the program to turn it off, and I don't know what else I can do to run what is clearly already loaded on my computer.  I hope that makes sense for someone who can help out me!  Thanks a lot in advance.

  You don't need to insist on the deactivation of this situation. Activation is related to your hardware, so if you uninstall / reinstall on the same drive, you should be good, even without turning off, because you must always show as enabled on this computer, then you do not use your activation others. If you get a new hard drive, it's different.

• Iexplore.exe application 0x079B0068 error - I need to turn off DEP for certain programs and services, but I don't know which. I can't open some favorite sites. Micorsoft advice is not to turn off Dep for all programs and services.

  Iexplore.exe application error 0 x 0790068 - I am told that I have to turn off DEP for certain programs and services, which?  I am unable to open some favorite sites from one about Microsoft Update 1 month ago.
  Simplify the answer please, I'm so confused and frustrated and have spent hours to get to this point that I am destroyed so solve my problem!

  Hello

  Do run this as a top list of verification at the bottom.

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• How to turn off the microphones and set up WLAN on Satellite A210-11 b?

  Hello

  I have laptop with MIC and I don t know how to SHUT OFF him... and if anyone wants to help me can u tell how to configure WLAN in this laptop because I can't set it up properly.

  As a first step please help me with this microphone in my laptop becuse I want to put in the output channel. Please help me. I can't speak on TEAM SPEAK 2.

  Hi mate,

  I assume you have Windows Vista installed. If that's true then go to control panel-> hardware and sound-> registration-> choose 'FrontlineIn' or 'Frontmic' (which is available at this time) and Don t forget to connect your headphones before.

  About WLAN, you should check out this article: http://helpdesk.uafortsmith.edu/Guides/VistaWirelessSetup

  Welcome them

• I need to turn off CTRL + W so that it closes windows open on my desktop.

  A planning program I use for work to connect to a working computer and work remotely uses the function CTRL + W. Whenever I use it for my computer it closes my window open and I have to start all over again. I can't get my work done with CTRL + W drag screwing of my day. I do not use CTRL + W for ANYTHING other than this program to work. Does anyone know how to turn off completely? I've tried a few programs keyboard mapping different who quoted me online, but nothing helped. Help, please. Sincerely, Tina

  Hi Dougpruett,

  Please report the problem to Microsoft Community.
  If we understand that you want to disable the windows shortcut keys.

  We will try to help him with this.

  
  We would like to tell you that the shortcut Ctrl + W is only a pre set the shortcut used to close open windows in Windows Explorer.
  See: http://windows.microsoft.com/en-US/Windows7/Keyboard-shortcuts
  So this is normal. We have not found a way to modify a shortcut created by the operating system.
   

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Had a new motherboard put in my computer and I can reinstall my Lightroom 2015, says I need to turn off a computer. What should I do?

  I put my 6 Lightroom on my desktop and this year my mother of computers died and Redid the computer. I went to put it back on my computer and it says that I have it on 2 computers (on my desktop and my laptop) I want to put on my desk, I can't turn off my desktop with the old motherboard, its dead! I registered on my laptop but not go. Adobe have support so what I'm doing. It's like I threw $ 150. Please, I'd appreciate any help!

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Smartphones to sync blackBerry WIRED, need to turn off wireless on the BB. HOW?

  The Office of Bishop says to turn off wireless on my Curve 8310 to synchronise with my laptop at home.  On the BB, where is this function nonwireless / wireless?  I'm trying to synchronize via USB with a cable.  Previously, this curve has been synchronized wireless to the computer from one employer to a job, I have more.

  Well, you can do one of 2 things:

  1. Go into the database (calendar, address book, etc.), click the menu button, click Options. From there, you can enable disabled wireless synchronization. You can leave the settings for each database that you want to synchronize with.
  2. You can follow these steps to remove the it strategy from your phone. This remove any policies that may still be implemented on your device when it is connected to your company BES. It will take these synchronization Wireless out of your phone lines. http://www.BlackBerryFAQ.com/index.php/Remove_IT_Policy

• Need to turn off the yellow button highlight on question slides

  The highlight of yellow button that appears on question slides can be disabled? In addition, no one knows what the yellow highlight is tryng to tell the person answering the question? I think that it is displayed when the answer to a question can cause your score fall below the pass mark established for a test.
  Thank you for any assistance.
  

  Thanks for the suggestion of wedget. It will turn off the yellow highlight in the quizzes. I'll put it to work and see if it works.
  medmgmt

• Sansa clip cracked screen and need help turning repeat stop

  My screen is cracked and I can not afford a new mp3. Unfortunately, it's the repeat mode 1 song when he cracked.  I just need a procedure step by step to how to repeat offshore.  I don't see any of my screen. I would also like to know how I could put it on playall instead of just a song mode.  I tried to reset it but it doesn't work. I'll be away from my own computer for a few months, so I would rather not format because I lose my original songs that I have on this subject.  I also have an audio book on it then a procedure step by step on access which will be useful also.

  Hmmm I don't know how useful it will be: do you see anything on the screen?

  My version of firmware on the clip is: 01.01.30a

  Starting point:   When I turn on my video it automatically starts playing my last song and obeys the shuffle / repeat options.

  By pressing the menu key small I will be positioned on the music

  Music (headphone icon) ... If I click the bottom , I get the following menus:

  FM radio

  Voice

  Parameters

  Music (back to music again)

  If I click Select on the music , I get the following features:

  Play all

  artists

  Albums

  Songs

  Kind

  My best rated

  Playlists

  Podcasts

  Audio books

  records

  Music options

  Play at all (and back to play at all)

  If I'm playing together and the song: each arrow pointing down will give you the following:

  Back to the list of music

  Add song to Golist

  Rate song

  Shuffle (stop / market)

  Repeat (All, Off, song) *.

  Music EQ

  Clear Golist

  Delete the song

  Back to the list of music (then return to the list of music once again)

  If in this menu, I click on the right arrow on repeat * for every time I press the right arrow key, I turn the 3 following options

  All the

  Off

  Song

  Allows you to start with the Clip off: so: If your clip is on... turn it off...

  If your clip is now disabled, start by putting on:

  then click on the small menu button

  then click Select

  then click Select again to play all the music

  Wait a few seconds and the songs should begin to play.   or if its on UN-pause pause, there click on place

  To change the repeat function: while playing a song...

  Click Select

  click the bottom 5 times

  then to change click on repeat right options will be all out, song and start over with all, off, again song.    This will start with whatever the currently set option.

  So if his game to repeat the song. click on the right change to repeat all, right click to change to repeat Off

  Click Select = the middle button on wheel

  Hope this helps, reply back if it did.   and I'll look audio books, the next time or someone else could

• Need help to connect a microphone to the hearing

  Hello!

  I am having trouble doing something that seems very basic. I can't set up my microphone to record in the hearing. I am a total newbie to any form of sound recording and don't know anything about. I'm going to be as specific as possible to help someone help me.

  I recently bought a microphone condenser Neewer NW-700. I have it running in a mixer Behringer Xenyx 802 via XLR to 2.5 mm (with a 3.5 mm adapter). Mixer does not have a USB connection so I ran it on my computer (Macbook Pro running OS X El Capitan 10.11.3 at the end of 2011) through a Behringer U-Control UCA222 USB Audio Adapter RCA.

  I went into Preferences > hardware Audio selected USB Audio CODEC for my default entry and exit and did the same thing in the settings of the sound of my Mac.

  When I went to Audition for record, the wave was flat and I could not hear everything that comes out of the speakers. I went to the Audio devices page on my Audio Setup and lunch where I was able to adjust the volume of Audio Out but not Audio In.

  This is as far as I'm away. I've been Google searching for about a week now and nothing has worked. I'm not sure it's a computer problem, a hardware problem or a hearing problem -as I said, I don't know anything about this kind of stuff.

  I appreciate all the advice. Thank you!

  I just googled your microphone and ryclark is spot on.   The XLR Plug to 3.5 mm cable included with microphone is completely useless - there are several videos that appeared on my taling research on this subject.

  You need an XLR - f for XLR - M cable to connect on your mixer, turn on the Phantom, follow-up instructions that I proposed above.

  I also write a letter to Neewer asking a discount because they provide a cable can possibly use.