I need help, turn off the internal mic
Please explain to me as I am 5. I have a headphone (with mic jack and Jack audio input type). Whenever I plug them in, however, the computer decides to use the internal microphone instead. Is it possible to switch off my internal microphone without turning off sound settings (given that my headset in would appear under micro)?
I'll try to look in the Device Manager to see if it does not show two microphones. If so, you can disable one of them. To get the Device Manager, click Start and right click on computer, then click Properties, then Device Manager.
Good luck.
Tags: Windows
Similar Questions
-
How do you turn OFF the internal mic so no sounds will be picked up by the mic at all?
Pavilion dv6-6140 Windows 7
I want to disable the internal microphone completely during short periods of time and then turn it back on. Tried to use the cam and the micro-click Disable in the program - but I was told by the host of the class, they could still hear my key clicks when I typed and back on the ground of the sounds.
I want to close the microphone down quite so no sounds can be heard during a period of time, then turn it back on. Help, please.
Hello
Try the following.
Do a right-click the speaker icon in the taskbar and select "playback devices". In the next window, click on the recording tab, click to the left of the built-in Microphone Array once just to highlight and then right-click and select Disable.
When you want working again, just follow the above procedure and select activate in the right-click options.
Kind regards
DP - K
-
If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer. I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.
You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?
Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »
And do the same for entries under Human Interface Devices (HID) device as Manager.
Then restart...
-
I need help turning off my microphone
Hey, I am running windows 7 starter on a msi u123 edition and I can't figure out how to turn off my microphone. I installed realtek hd audio Manager, but I can't figure out how to turn off my microphone. I looked everywhere in the Panel, and I don't think that I have the option on my keyboard to turn it off. Please help :)
Hello
You can turn off the microphone by following the steps below.
1. click on the Start button and select Control Panel.
2. click on hardware and sound.
3. click on the sound.
4. now, in the pop-up window, click the recording tab.
5. right click on Microphone, and select Disable. You can activate it by selecting the option activate after a right click on it.
Hope this information is useful.
Umesh P - Microsoft Support -
Need to turn off the yellow button highlight on question slides
The highlight of yellow button that appears on question slides can be disabled? In addition, no one knows what the yellow highlight is tryng to tell the person answering the question? I think that it is displayed when the answer to a question can cause your score fall below the pass mark established for a test.
Thank you for any assistance.
Thanks for the suggestion of wedget. It will turn off the yellow highlight in the quizzes. I'll put it to work and see if it works.
medmgmt -
I'm operating Vista Ultimate with 64-bit system. This happens in all the applications I use. I will allow me to scroll through 15 to 20 pages until I can stop and then need to find the orginial page, sure I was. I don't know what o call it. Tried to review several books in the borders and Barnes and noble but nothing helped.
Hello
Thank you for using the Microsoft Windows Vista Forums.
If you have a wheel mouse, Windows Vista default scroll 3 lines in a document, Web page, etc., at a time when you scroll the wheel upwards or downwards.
Send instructions on changing the properties of the mouse. Under "Vertical scroll", choose whether or not to scroll a few lines at a time or a full page at a time. It is best to scroll one full page at a time, if you work with very large documents.
If you scroll through a number of lines at a time, check the box under "The number following lines both" to change this behavior. 1 line is slow scrolling; 100 is the fastest.
You must change the mouse settings by following the instructions below that will help you solve the problem.
1. open the mouse by clicking the Start button, click on the Control Panel, clicking hardware, and then clicking on the mouse.
2. click the wheel tab and then do one of the following:- To set the number of lines that the screen will scroll for each notch of mouse wheel movement, click on the next lines in both number and then enter the number of rows you want to display in the box.
- To scroll an entire screen of text for each click of the mouse wheel, click one screen at a time.
- If your mouse has a wheel that supports horizontal scrolling, in the tilt the wheel to scroll the number of characters in a time zone, enter the number of characters you want to scroll horizontally when you tilt it flying to the left or to the right.
Click on the link below for more information on changing the settings of the mouse.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Need help to access the internal network via VPN on ASA5505 8.4 (1)
Recently, I upgraded my ASA5055 from 8.02 to 8.4 and since I have updated to the new version I can access my home network is no longer through the VPN. I can connect to the VPN with no problems however I can no longer ping or you connect to my network of 10.0. Someone would be kind enough to look at my config and tell me what needs to be added to make it work? In my old config, I had a statement of NAT for VPN that is no longer here.
I also wanted to configure WebVPN to work as well, and this is something that I've never been able to understand. Is it also possible that I can be on my 20.0 network and connect to the VPN and access 10.0 as well? When it is connected to my network of 20.0 I'm not received credentials to connect to the VPN. I would be grateful if someone can help out me. The major part of this is the first part of this question.
My configuration:
ASA Version 8.4 (1)
!
ASA5505 hostname
domain xxxxxxxx.dyndns.org
enable encrypted password xxxxxxxxxxxx
xxxxxxxxxxxxxxx encrypted passwd
names of
nameserver 192.168.10.2
Office of name 192.168.10.3
name Canon 192.168.10.5
name 192.168.10.6 mvix
name 192.168.10.7 xbox
name 192.168.10.8 dvr
name 192.168.10.9 bluray
name 192.168.10.10 lcd
name 192.168.10.11 mp620
name 192.168.10.12 kayla
name 192.168.1.1 asa5505
name 192.168.1.2 ap1
name 192.168.10.4 mvix2
name 192.168.10.13 lcd2
name 192.168.10.14 dvr2
!
interface Vlan1
nameif management
security-level 100
IP address asa5505 255.255.255.248
management only
!
interface Vlan2
0050.8db6.8287 Mac address
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan10
nameif private
security-level 100
IP 192.168.10.1 255.255.255.224
!
interface Vlan20
nameif Public
security-level 100
IP 192.168.20.1 255.255.255.224
!
interface Ethernet0/0
Description pointing to WAN
switchport access vlan 2
!
interface Ethernet0/1
Uplink port Linksys 12 description
switchport access vlan 10
!
interface Ethernet0/2
Description Server 192.168.10.2/27
switchport access vlan 10
!
interface Ethernet0/3
Uplink Eth1 management description
!
interface Ethernet0/4
switchport access vlan 30
!
interface Ethernet0/5
switchport access vlan 30
!
interface Ethernet0/6
switchport access vlan 30
!
interface Ethernet0/7
Description of Cisco 1200 Access Point
switchport trunk allowed vlan 1,10,20
switchport trunk vlan 1 native
switchport mode trunk
!
Banner motd users only, all others must disconnect now!
boot system Disk0: / asa841 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain xxxxxxx.dyndns.org
network object obj - 192.168.50.0
192.168.50.0 subnet 255.255.255.0
Server network objects
host 192.168.10.2
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.224
network object obj - 192.168.20.0
subnet 192.168.20.0 255.255.255.224
network server-01 object
host 192.168.10.2
network server-02 object
host 192.168.10.2
xbox network object
Home 192.168.10.7
xbox-01 network object
Home 192.168.10.7
xbox-02 network object
Home 192.168.10.7
xbox-03 network object
Home 192.168.10.7
xbox-04 network object
Home 192.168.10.7
network server-03 object
host 192.168.10.2
network server-04 object
host 192.168.10.2
network server-05 object
host 192.168.10.2
Desktop Network object
host 192.168.10.3
kayla network object
Home 192.168.10.12
Home_VPN_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
outside_access_in list extended access permit tcp any any eq 3389
outside_access_in list extended access permit tcp any any eq 2325
outside_access_in list extended access permit tcp any eq ftp server object
outside_access_in list extended access permit tcp any any eq 5851
outside_access_in list extended access udp allowed any any eq 5850
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access udp allowed any any eq syslog
outside_access_in list extended access udp allowed any any eq 88
outside_access_in list extended access udp allowed any any eq 3074
outside_access_in list extended access permit tcp any any eq 3074
outside_access_in list extended access permit tcp any any eq field
outside_access_in list extended access udp allowed any any eq field
outside_access_in list extended access permitted tcp everything any https eq
outside_access_in list extended access permit tcp any eq ssh server object
outside_access_in list extended access permit tcp any any eq 2322
outside_access_in list extended access permit tcp any any eq 5900
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any any source-quench
outside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any one time exceed
outside_access_in list extended access udp allowed any any eq 5852
KaileY_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 36000
logging warnings put in buffered memory
recording of debug trap
asdm of logging of information
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
Management Server host forest
MTU 1500 management
Outside 1500 MTU
MTU 1500 private
MTU 1500 Public
local pool IPPOOL 192.168.50.2 - 192.168.50.10 255.255.255.0 IP mask
local pool VPN_POOL 192.168.100.2 - 192.168.100.10 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ASDM image disk0: / asdm - 641.bin
don't allow no asdm history
ARP timeout 14400
!
Server network objects
NAT (private, foreign) static tcp ftp 5851 service interface
network object obj - 192.168.10.0
NAT (private, foreign) dynamic interface
network object obj - 192.168.20.0
NAT (outside) dynamic public interface
network server-01 object
NAT (private, outside) interface static 2325 2325 tcp service
network server-02 object
NAT (private, outside) interface static udp syslog syslog service
xbox network object
NAT (private, outside) interface static service udp 88 88
xbox-01 network object
NAT (private, outside) interface static service udp 3074-3074
xbox-02 network object
NAT (private, outside) interface static service tcp 3074-3074
xbox-03 network object
NAT (private, outside) interface static tcp domain domain service
xbox-04 network object
field of the udp NAT (private, foreign) of the static interface function
network server-03 object
NAT (private, outside) interface static tcp https https service
network server-04 object
Static NAT (private, outside) interface service tcp ssh 2322
network server-05 object
NAT (private, outside) interface static 5900 5900 tcp service
Desktop Network object
NAT (private, outside) interface static service tcp 3389 3389
kayla network object
NAT (private, outside) interface static service udp 5852 5852
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.248 management
redirect http outside 80
location of SNMP server on the Office floor
SNMP Server contact [email protected] / * /
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.248 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 30
access to administration management
dhcpd dns 24.205.1.14 66.215.64.14
dhcpd ping_timeout 750
dhcpd field xxxxxxxx.dyndns.org
dhcpd outside auto_config
!
dhcpd manage 192.168.1.4 - 192.168.1.5
dhcpd enable management
!
dhcpd address private 192.168.10.20 - 192.168.10.30
enable private dhcpd
!
dhcpd 192.168.20.2 public address - 192.168.20.30
dhcpd enable Public
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.43.244.18
Server NTP 129.6.15.28
WebVPN
internal Home_VPN group strategy
attributes of Group Policy Home_VPN
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol without ssl-client
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Home_VPN_splitTunnelAcl
value by default-field www.xxxxxx.com
the address value IPPOOL pools
WebVPN
the value of the URL - list ClientlessBookmark
political group internal kikou
group attributes political kikou
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list KaileY_splitTunnelAcl
XXXXXXX.dyndns.org value by default-field
username scottrog encrypted password privilege 0 xxxxxxxxxxxxxx
user_name john encrypted password privilege 0 xxxxxxxxxxxxxxx
username joek encrypted password privilege 0 xxxxxxxxxxxx
eostrike encrypted xxxxxxxxxxxx privilege 15 password username
username almostsi encrypted password privilege 0 xxxxxxxxxxxxxx
username ezdelarosa password xxxxxxxxxxxxxxencrypted privilege 0
type tunnel-group Home_VPN remote access
attributes global-tunnel-group Home_VPN
IPPOOL address pool
LOCAL authority-server-group
authorization-server-group (outside LOCAL)
Group Policy - by default-Home_VPN
authorization required
IPSec-attributes tunnel-group Home_VPN
IKEv1 pre-shared-key *.
type tunnel-group SSLClientProfile remote access
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
tunnel-group type ClientLESS remote access
tunnel-group kanazoé type remote access
attributes global-tunnel-group kanazoé
address VPN_POOL pool
by default-group-policy kikou
tunnel-group KaileY ipsec-attributes
IKEv1 pre-shared-key *.
by default-group Home_VPN tunnel-Group-map
!
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:438ed6084bb3dc956574b1ce83f52b86
: end
ASA5505 #.
Here are the declarations of NAT for your first question:
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.50.0 obj - 192.168.50.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0
And 'clear xlate' after the above and that should fix your first question.
I would check your second question and get back to you shortly.
-
Screen freezes - need to turn off the Satellite C660 series to retrieve the display
I have a Satellite Pro with Windows 7.
As Emma in a previous thread, I have problems with the screen freezing and having to go off to recover.I think it might have something to do with the Windows updates, but can anyone offer any assistance.
Please, I beg you! In the plain in English please because I am a silver surfer!
Mariel
+ The message was edited: laptop model number has been added.
Hi Mariel
It would be interesting and useful to know which model of laptop you have.
Then you tried to reinstall or update the display driver?Please do.
-
I need to turn off the Fn Keys L530
Hello
I work for a school district and we have online tests. Of the requierments is that all the function keys are disabled. I have a solution to do, but are left empty-handed.
Does anyone know of a solution for my problem? I would have preferred a GPO if possible.
Thank you
You'll probably have to write an autohotkey script to remove the link F1 to F12.
Brightness and volume probably cannot be disabled because they reached a level relatively low. Other shortcut keys can probably be rebound:
https://forums.Lenovo.com/T5/Windows-7-knowledge-base/fn-FX-key-mapping-for-Windows-7-ThinkPad-gener... -
Photon: Car dock: routing of calls through car speakers turns off the phone mic?
The title says it all, but I'll explain it. I bought the car dock and most of the time it looks cool, but there is a weird problem. I have the phone in the dock, and I have the audio cable from the charger to the auxiliary audio port of my car. When I try to make a call, the default speaker phone. In a noisy car environment, it is difficult to hear the other person of property. While the appeal goes, there is a "speaker" down button right on the phone that I can press on, which causes the audio to be routed via the speakers of the car being music, which is excellent. However, doing so causes both the person on the other line to be able to hear me, that makes no sense and is frankly very frustrating.
I saw a couple of discussions on the issues, then I know that I'm not the only person to have had this experience, but I was not able to find a solution yet. Someone know if there is a solution, or if at least that there is a questions recognized by Motorola that could be fixed in the future? I guess it's a software issue any.
Related discussions I've found:
https://supportforums.Motorola.com/message/450352#450352 (reply 5)
http://www.SprintUsers.com/Forum/archive/index.php/t-222513.html
http://www.ramocafe.com/t318234.html
Thank you
Travis
-
How to turn off the display after a while without input
Original title:
Activate the screensaver mode full-screen.
Hello
Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?
Hello
Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.
Please visit the following links and set the option to turn off the display according to your requirement.
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Power management
http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management
Hope that the information provided is useful. Do not respond if you need more help.
-
Hello
I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.
On systems prior to Vista and 7, IIRC, running a command in the sense of:
Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.Does anyone have an idea on how to do it on Windows 7?
I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).
Thank you for your help,
NicApicellaHello
Sleep is one thing and switching Off the Display is quite another.
I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).
Create a batch with the following script file:
echo off
C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1START/min/Wait C:\Windows\System32\scrnsave.scr s
C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.
Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).
For example, in my computer laptop m1 = m2 = 30 and 10.
Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.
Explanation of the script:
The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.Kind regards
Sushovon Sinha
-
I replaced my hard drive and format my computer before turning off the software PS. It need my code series now, but I had lost.
How can I solve the problem and use the software again?
If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number. The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use. If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.
-
I need help to turn off the power or turn off the video card integrated on my inspiron 530, I had the drivers of the 8600gt installed and ready, but whenever I put the DVI in I get a black pic, so I did research online and I found the way, and that is to disable the video card intel which is located on the motherboard then how?
I learned that I have to press F2 on the screen of the BIOS and go somewhere.
so please help me!
Thanks in advance
Here's my card, if you need em
Amount Total of Dell Inc. manufacturer of model system Inspiron 530 system memory 2,00 GB RAM System 32-bit operating system to type number of processor cores 2 64-bit capable Yes storage Total size 298 GB hard drives (C :) disk partition 162 GB free (288 Total GB) disk partition (d :)) 6 GB free (Total of 10 GB) Media Player (e :)) disc of CD/DVD media (g) adapter DVDCD/disc display of graphs of type Intel (r) G33/G31 Express Chipset Family graphics Total available 286 MB dedicated graphics memory 0 MB system memory dedicated memory 128 MB shared system memory 158 MB display adapter driver version 7.14.10.1437 monitor main resolution 1440 x 900 version DirectX DirectX 9.0 or better)) network card Intel (r) 82562V-2 10/100 Network Connection Network Microsoft Tun Miniport Adapter
-
Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday
Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?
Maybe you are looking for
-
It takes minutes to delete each message
I can only with great difficulty - very slow - read each message. If I want to delete it then it will take minutes be moved to the trash. What happens for a few days I opened an attachment that was not a friend, but of the Argentina.
-
Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible
To anyone who thinks of a memory upgrade on the NB550D: The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and no
-
By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update. 9.3 IOS doesn't have a verification because you are no longer connected to the Internet. New attempt remind Me later. " See the image below. Note that whi
-
What is Hello on a microsoft PC
What is microsoft bonjuor, he continues to say tha it does not work
-
I would use an administrative password but do not know how to create
OT: help please. I would use an administrative password but do not know how to create