I need help with some files missing error Muse - crazy customer

Similar Questions

• Need help with some files

  Then I opened the Task Manager today only to find 3 things I'd never seen before, they were atieclxx.exe, csrss.exe and winlong.exe. I did a bit of googoling (?) and I'm a bit confused. I see a few similar questions on other forums were people said that they were a form of spyware, while others apparently say it is just a process about my graphics card and normal to run, but I had never seen before.

  I would be grateful if someone could give me some clarification.

  Thank you.

  For peace of mind I suggest you run a malware check

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in normal mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free
  http://helpdesk.Malwarebytes.org/entries/21892442-should-I-scan-with-Malwarebytes-anti-malware-in-safe-mode-

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• need help with windows update C8000F1A error code

  I need help with an error code that is given to my PC when I try to put up-to-date

  Hello

  1. don't you make recent changes?

  2. This does happen with any special updates or all updates?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:
  I suggest you follow the steps in the link below and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  It will be useful.

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• Need help with flashing file + question mark at startup

  My Macbook Pro has worked fine until yesterday. On startup, I get the flashing file, so I rebooted and held command + R. Once I have try disc recovery/upgrade to update OS/restoration I need a startup disk file to choose and everything is empty. How can I get the possibility of a boot disk? Do I need a physical disk? I just checked my box of the laptop and I don't have a physical disc.

  Thank you.

  If a flashing question mark appears when you start your Mac - Apple Support

  Which shows in disk utility that is located in the recovery?

  Cutting in-house of may have failed or yo have a problem with the internal connection.

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Need help with raw files

  I reinstalled and updated CS5, but I'm unable to open camera raw to my Canon Rebel T4i. I get the following message:

  Could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw.

  Please visit the Camera Raw help documentation for more information.

  Camera Raw is a plug-in in Adobe Photoshop, Photoshop Elements and Lightroom dealing with Raw files. Camera Raw should be updated for each new brand and model of camera that comes on the market. Camera Raw is frequently updated, but not all versions of Camera Raw are compatible with all versions of Photoshop.

  See 't-my-version-of-photoshop-or-lightroom-prise in load-my - http://blogs.adobe.com/crawlspace/2011/03/why-doesn camera .html

  According to http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  the rebel T4i was first supported by Camera Raw 7.1.

  Camera Raw 7 + is only compatible with CS6 and higher.

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  Your choice:

  1. CS6 update
  2. Join the Cloud
  3. Convert all your T4i Raw DNG files using free Adobe's DNG Converter
     http://www.Adobe.com/products/Photoshop/extend.displayTab2.html
     Then, edit the DNG in your existing CS5.

• novice needs help with some questions

  I was myself ball how to design a website that is now almost complete, I need help, ensuring that everything is in order.
  My question is;
  at present, all the img sources are in a file in my computer IE... My Documents\My webs\site\image.jpg
  Now is this good? When I send this through the server it will be placed in another file and then the source will be incorrect?
  Matter that has any help, I know I'm a little sore but I'm just learning!

  If the path you have for your img tags has my documents... then Yes, it will be incorrect when you move the images on your web server. I'll put just generally in the way, I use on the server and worry about the pictures once I get the downloaded pages.

• I need help with some Applescript for Postbox

  I was wondering if any of you can help me?

  I am writing a very simple script for my Postbox email application. It takes the selected message and turns it into a reminder. Everything works fine, but I want to take the subject assigned to the message and use it as the name of the callback list, and that's where it breaks down (topics are tags, as in Thunderbird and Mail).

  According to the dictionary, a message object counts among its subjects msg properties which is a list of subjects. According to the dictionary, a subject has three properties so, id, name , and color.

  I need only the first topic, so I do something like

  set theTopics to msg topics of theMessage.
  set theTopic to item 1 of theTopics

  no error reported, it returns a list, but when I then try to access the properties of the first article (= first subject), it is clear that something is wrong, and I think it's a bug/bad programming in the mailbox, but I'm not sure.

  When I do something like

  set ReminderList to name of theTopic

  He begins to complain. It is said that name (or id or color) is not available, as I can't get this to other classes, and it does not even return the class type for the element.

  It will return something that looks like this:

  class {show id "some topic"}

  no name for the class.

  And it seems that the text, but it behaves differently.

  How can I know what I'm actually deal with this object "topic"?

  What is - this actually to return?

  I don't know the app, but try to go back to theTopic properties.  That could make things a little clearer.

• Satellite U940 - 11b - need help with recovery files

  Madam/Sir,

  I have a question about a failure U940 - 11 c.

  The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

  Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

  1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

  2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

  3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

  4. the disk is allocated:

  Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

  Hello

  I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
  If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

  Tom BR

• Need help with eps files

  Hi all I bought this stat reflections eps file, I want to use the icon in the lower right, but do not know how to separate the background... I need like a png... Oh can smart designers, anyone help? I tried to download the eps, but was not allowed to download it... Please please advise!  A big thank you.

  Here's a quick I did with the starfilter. It's a 1000 pixel wide PNG, so if it's enough, you can try this.

  

  Put it in "Screen" blend mode on your image, and it will look something like this:

  

• Need help with RMAN archive destination error during hot backup

  Hello
  
  Oracle 8.0.6, Win 2000 Server.
  
  We take the cold daily backup as our backup strategy. We wanted to implement the backup hot. If one day, I turned on the log mode archive and set the directory to archive in F:\drive to store all archived generated. I took the backup and put the database in noarchive log mode. We continued with offline backup.
  
  After a few days, I wanted to test the hot backup again. I created the directory of the archive in E:\archive\ instead of F:\archive\. When I started the hot backup, all files have been copied except the archives.
  
  The error was:
  
  RMAN-03022: compilation command: sql
  RMAN-06162: SQL statement: alter system archive log current
  RMAN-03023: executing command: sql
  
  RMAN-03022: compilation command: backup
  RMAN-03026: recovery error release of channel resources
  RMAN-08031: output channel: c1
  RMAN-08031: output channel: c2
  RMAN-00569: = error message stack follows =.
  RMAN-03002: failure during the compilation of command
  RMAN-03013: type command: backup
  RMAN-06089: journal archived F:\ARCHIVE\ARCH1_0000327116.ARC not found or at odds with catalog
  
  Complete recovery manager.
  
  RMAN is looking for the destination of the journal archive old i.e. 'f:\archive\ '. I don't have the backup of the old archives of destination. I put the new destination to archive E:\archive\ in the initorcl.ora file, rman is always looking for destination F:\archive\.
  
  Please suggest what to do. How can I remove old information from archive of controlfile and say rman, look in the new archives destination i.e. E:\archive\

  Hello
  WOW 8.0.6.
  Maybe you can run a cross?

  change archivelog than any overlap;

  Update
  Found some docs online for 8.0
  http://download.Oracle.com/docs/CD/A58617_01/server.804/a58396/TOC.htm
  She does not mention the overlap.
  With the change command, you should be able to do the cleaning as well.
  If you have moved the archivelogs to the new location, you can use catalog according to the doc.
  Kind regards
  Tycho

  Edited by: tychos on mrt-27-2011 08:26

• I need help with a 1706.Does error message, someone knows how to solve this problem without cost me?

  Someone will help me fjnd out what to do and how to fix it. My problem is when I try to install anything, I get an error message 1706.  can anyone help me solve this problem without cost me fifty dollars or more

  See:

  You receive an "error 1706. Setup cannot find the required files...

• Need help with importing files

  Hi, I recently installed CC on Mac. I've already used on PC and I copied my Lightroom Catalog Previews etc. for Mac. I have also reformatted my hard drive with exFat. I imported the files into lightroom. Now, when I look at photos editing in Lightroom it says that my files are missing. What have I missed? Thank you!

  I don't know why you get the message you found... but... you are NOT importing the photos on your new computer. The procedure to follow is that you copy the file to catalog from the PC to the Mac, open the catalog file in Lightroom (file-> open the catalog) and then reconnect the photos in Lightroom there instructions: Adobe Lightroom - find folders and files moved or missing

• Need help with some oracle basics

  Hi friends,
  
  I would like to know if my abt to understand some concepts as described below is just?
  
  1) active user : when a user issues a command SQL to oracle to perform.
  
  (2) * user inactive: * when oracle wait for users to issue commands and the user is INACTIVE.
  
  
  Please help me to find these answers:
  
  A user become active when they click submit button/backup/restore?
  
  I would like to know how much resources a user oracle uses (network traffic, memory, I / O)?
  
  Is a user uses some resources if it is inactive and sitting idle for long time?
  
  
  
  Thank you

  Oracle marks a session as a session inactive if the user will not do anything with the database for some time. I don't know what is the explanation for the status of the session that you see a toad, since I do not use it. Maybe someone else would have a better explanation then wait for others to participate.

  Aman...

• Need help with exe files.

  I am looking for an exe file to play on the laundry. How to insert the exe file in dreamweaver 8 to play when the page is loaded. Very similar to a flash movie is loading. The file is created with the extension exe and I can't change it or recreate. any help is appreciated. Thank you

  In general you can not do this on anything other than an intranet. Is it
  where you work? If so, then you should investigate using
  ActiveX to run this exe file - check the Microsoft site...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "brananc1" wrote in message
  News:ee265m$LCT$1@forums. Macromedia.com...
  > I'm trying to get an exe file to play on the laundry. How do I insert the
  > exe
  > file in dreamweaver 8 to play when the page is loaded. Very similar to the loading
  > a
  > flash animation. The file is created with the extension exe and I can't
  > change
  > who or recreate. any help is appreciated. Thank you
  >