Need help with raw files

Similar Questions

• Help with Raw files

  I use an Imac with processor PowerPC G5 2.1 Ghz running OS X 10.5.8 and Photoshop CS2.  I just bought a Nikon D300s and want to work with raw files.  Adobe told me that I need to CS5, which means that I would need to buy a new computer.  Is this in any way about this?

  You will need to convert your raw files to DNG with Adobe free Converter: http://www.adobe.com/products/dng/

• Need help with flashing file + question mark at startup

  My Macbook Pro has worked fine until yesterday. On startup, I get the flashing file, so I rebooted and held command + R. Once I have try disc recovery/upgrade to update OS/restoration I need a startup disk file to choose and everything is empty. How can I get the possibility of a boot disk? Do I need a physical disk? I just checked my box of the laptop and I don't have a physical disc.

  Thank you.

  If a flashing question mark appears when you start your Mac - Apple Support

  Which shows in disk utility that is located in the recovery?

  Cutting in-house of may have failed or yo have a problem with the internal connection.

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Satellite U940 - 11b - need help with recovery files

  Madam/Sir,

  I have a question about a failure U940 - 11 c.

  The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

  Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

  1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

  2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

  3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

  4. the disk is allocated:

  Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

  Hello

  I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
  If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

  Tom BR

• Need help with eps files

  Hi all I bought this stat reflections eps file, I want to use the icon in the lower right, but do not know how to separate the background... I need like a png... Oh can smart designers, anyone help? I tried to download the eps, but was not allowed to download it... Please please advise!  A big thank you.

  Here's a quick I did with the starfilter. It's a 1000 pixel wide PNG, so if it's enough, you can try this.

  

  Put it in "Screen" blend mode on your image, and it will look something like this:

  

• Need help with exe files.

  I am looking for an exe file to play on the laundry. How to insert the exe file in dreamweaver 8 to play when the page is loaded. Very similar to a flash movie is loading. The file is created with the extension exe and I can't change it or recreate. any help is appreciated. Thank you

  In general you can not do this on anything other than an intranet. Is it
  where you work? If so, then you should investigate using
  ActiveX to run this exe file - check the Microsoft site...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "brananc1" wrote in message
  News:ee265m$LCT$1@forums. Macromedia.com...
  > I'm trying to get an exe file to play on the laundry. How do I insert the
  > exe
  > file in dreamweaver 8 to play when the page is loaded. Very similar to the loading
  > a
  > flash animation. The file is created with the extension exe and I can't
  > change
  > who or recreate. any help is appreciated. Thank you
  >

• Need help with some files

  Then I opened the Task Manager today only to find 3 things I'd never seen before, they were atieclxx.exe, csrss.exe and winlong.exe. I did a bit of googoling (?) and I'm a bit confused. I see a few similar questions on other forums were people said that they were a form of spyware, while others apparently say it is just a process about my graphics card and normal to run, but I had never seen before.

  I would be grateful if someone could give me some clarification.

  Thank you.

  For peace of mind I suggest you run a malware check

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in normal mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free
  http://helpdesk.Malwarebytes.org/entries/21892442-should-I-scan-with-Malwarebytes-anti-malware-in-safe-mode-

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• Need help with importing files

  Hi, I recently installed CC on Mac. I've already used on PC and I copied my Lightroom Catalog Previews etc. for Mac. I have also reformatted my hard drive with exFat. I imported the files into lightroom. Now, when I look at photos editing in Lightroom it says that my files are missing. What have I missed? Thank you!

  I don't know why you get the message you found... but... you are NOT importing the photos on your new computer. The procedure to follow is that you copy the file to catalog from the PC to the Mac, open the catalog file in Lightroom (file-> open the catalog) and then reconnect the photos in Lightroom there instructions: Adobe Lightroom - find folders and files moved or missing

• I need help with some files missing error Muse - crazy customer

  I get the error that some files are missing or incorrect. I have cleared the cache, I downloaded all the two to Muse, FTP etc. I cleaned the server and reloaded. Make the same mistake everywhere and can not find out what is happening.  www.Authorizedagents.com is the Web site. Site is horrible, but looks great in the preview. I'm in trouble

  Thank you

  Call your hosting provider. The hosting server is back a '503 Service temporarily unavailable' error rather than serve properly good number of files of your site.

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.