I NEED Q ALGUIEN ME AYUDE Q TENGA CONOSIMIENTO MI DRIVE NO QUEIRE GRABAR UN CD

Similar Questions

• Need help from the Realtek ALC268 for Windows XP driver

  Hi all

  I bought a new laptop an it was Vista installed on it.
  So I installed Windows XP well. But the audio driver does not work.

  I downloaded the Realtek dfferent versions, but no one worked...

  I've got the Realtek ALC 268 with HD Audio chipset. Anyone an idea how to solve the problem, or where I can download a driver that solves the problem?

  THX, FleetAdmiral

  If you use Windows XP, you need to install * KB888111 * and * KB835221 hotfix * before install driver sound!
  This should help!

• need an exact model of the PCI communications controller driver

  Mr President.

  my model is G62 B39 SE

  WINDOWS 7

  64-BIT

  HARWARE ID IS

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Please I need an accurate model of the PCI communications controller driver

  Hello

  It's a system driver wise called "Intel Management Engine Interface (MEI) ' as mentioned in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5040732 & sw_lang =

  Please download the exe on the link above and install on your machine.

  Kind regards.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• How much space do I need to allow for Vista while partitioning the hard drive?

  How much space do I need to allow for Vista while partitioning the hard drive?

  I am installing on a new drive hard and need to partition the hard drive.

  I remember he had a certaing amount allocated for vista and before recovery.

  Help, please!

  Hello

  40GBs is the minimum; who will be vey quickly useless.

  Recovery partition would have been photographed by the manufacturer of the computer hard disk and you can't replicate that.

  You can use all of the hard disk space available to install Vista on.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• Of Québec mi cuenta ha sido locked y no puedo recuperarla, me pide than llene UN formulario con datos muy personales including credit card numbers, alguien me ayuda?

  Help! 1111

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I need that alguien me diga como una particion mi disco duro volumen o eliminate. Intento con las options in Windows pantalla there meets me as any you can eliminate dicha particion. Sin MAS

  Mid operating system are Windows 7 Ultimate

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Satellite M60: Need a parallel port to connect the Iomega Zip drive

  Hi guys,.

  I have a Satellite M60 and I want to transfer files from my Iomega Zip drive.
  My laptop is not has a paraller port, so I bought a converter to operate, but there was no result.

  Is anyone of you know how to solve the problem and finally reach my driver ZIP of my Satellite in order to transfer files?
  Do I need another converter?

  If so, when is? Or do I have to buy a PCI card with paraller port?

  Any response will be appraciated

  thanx

  Hello

  I've never used a converter USB / parallel but a USB-to-serial port converter and I had very bad experience of such pieces of witch.
  AFAIK this adapters don't work properly.

  Therefore, your suggestion is not bad to use the PCMCIA card with a parallel port.

  Check first of all in your user manual what cards are compatible, then you can try to use this card.

  I think it would be the best solution to connect your Iomega Zip drive to the M60 laptop.

  Concerning

• HP Pavilion a6142n, 32-bit PC: need to update for Nvidia nForce 10/100 Ethernet Driver Version 67.8.9.0.

  I upgraded Windows Vista 32 bit Windows 7 32 bit and the report Upgrade Advisor says I have the Nvidia nForce 10/100 Mbps Ethernet.  The recomomended action is before installing Windows 7, go to the manufacturer's Web site to download the latest dirver for this device.  After I installed Windows 7, install the registered driver.

  I had no luck locating it on the Nvidia site, so any help in the search, it would be greatly appreciated.

  Thank you

  Hello:

  You need this driver...

  http://www.nvidia.com/download/driverResults.aspx/14874/en-us

• Need help downloading Flight Sim. Error 1327 E drive keeps popping up. How to install to drive C?

  Won't let me install the program Flight Sim X.  I keep getting the error 1327: Drive E.  I don't have an external drive.  How can I install on drive C?

  Hello

  Welcome to the Microsoft community. According to the description, you can not install Flight Simulator X. provide the following information:

  ·         What version of the operating system is installed on the computer?

  ·         What is the full error message?

  ·         Did you do changes on the computer before the show?

  ·         The question is limited to Flight Simulator X?

  I'll help you with this problem. I suggest you to follow the steps in the article and check.

  Microsoft games: InstallShield Error Messages

  How to solve problems when you install or uninstall programs on a Windows computer

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Need of Win 7 (32 bit) Intel HD Graphics driver for HP 14-d008tu laptop

  I had the graphics card driver Intel HD for Win 7 (64-bit) and now the HP Support and drivers!

  But I need display driver for Win 7 (32 bit).

  Please let me know how I can get this driver?

  If you need more description, then pleae let me know.

  Thank you.

  Hello:

  This bit 32 Intel graphic driver should work...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719

• I need Microsoft XP SP.1 for my new hard drive

  Grandson PC crashed into the hard drive with it. I couldn't make it work. Bought the new hard drive and reinstalled the original Windows XP, but it did not upgrade to Service Pack 1 with it. I can't find it on the web site of MS and could not get the site where he is supped to reside to open and allow me to download it. Can someone help me find SP-1 IF I REALLY NEED to get to SP - 3 and the final upgrades?

  To install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) installed.

  You can download SP1a, SP2, and SP3 from the links below:

  Windows XP Service Pack 1 has Express Install (32-bit) for end users
  http://www.Microsoft.com/download/en/details.aspx?ID=19751

  Windows XP Service Pack 2 network installation Package for IT professionals and developers
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  Files downloaded from the links above can be burned on CD/DVD in case you need them in the future.

  Learn how to install Windows XP Service Pack 3 (SP3)
   http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  When you have finished installing the service packs, you should run Windows Update as often as updates will create additional updates conditions (especially some the Service Packs .NET Framework). Run Windows Update, until the message no update is necessary.

  Kind regards

• I need to copy the software to the double boot drive

  Hi Noel,

  You remember me?

  Seriously I have XP upwards, and the operation and the goal to be able to run a multiboot system in order to run the two old software packages. Crazy I know, but I need to do.

  Simply, I have the following:

  Drive C: System

  Drive D: Windows XP NTFS

  E: drive Volume in Fat32.

  On this disc, I need to copy on a package that I have on an old drive that double boots: Windows 95 disk 1, part 1: and an old software Paradox on the 2 disc package, part 2.

  I lose my way in which the first due date can help you?

  Concerning

  Raphael

  Hi RaphaelEllis,

  You will need to check with the software manufacturer to see if there is a version update for Windows XP.

• I need to record my material from microsoft through WHQL driver, what are the application I have to present and where?

  I have to register my material from microsoft driver and what are the software application, that I need to present, in the case of printer WHQL? I thank in advance for your kind reply.

  Hello ABILASHK,

  The following link provides an overview of Windows Logo Program for hardware:

  Program Windows Logo Program for hardware: overview

  Best regards

  Matthew_Ha