I need some opinions on this file
For those who are experienced with Dreamweaver or anyone else on this forum:
Yesterday, I found this file with a txt extension point in the My Documents folder.
It seemed suspicious, but then I don't really know.
Some work with Wordpress, I installed Apache Server and manage the development of some php site.
Should I be worried?
Thanks for your input folks.
It seems that it is a transcript of someone trying to create a private key for their email accounts, but I'm guessing right here.
Your best bet is to ask someone on the Ubuntu Forum or Forum. Both are at this link:
News://NNTP.aioe.org/ALT.OS.Linux.Ubuntu
Good luck.
Tags: Dreamweaver
Similar Questions
-
Need some opinions on Qosmio G40-108
Everything is very nice on this laptop (which I am looking forward to buy out in Dubai), just a few things I want to inquire or discuss are:
Why disks burp at 4200 RPM?
Why does a such huge bezel around the screen?
and
The weight can be reduced at least abit? No don't worry, I got used to the weight to my G20, moreover, performance overshadows it;).Hello
Nice decision, it s an elegant machine.
So what about your questions:
HARD drive: drives are so small and they ability is very large, so they don t need to turn so quickly because they have with this speed, comparable performance as a hard drive of office with more rpm´s. (it s logical, just think about - small disc = lower rpms <->big disk = higher RPM = quite the same thing)
Bezel: because? :) I Don t know, maybe, they wanted just to design it in a way... ;)
No, it cannot be reduced because everything in this machine is fixed. If you want a machine with less weight, must be wary of some other machines like "Portege" or something.
I hope that all the answers were clarified at least 50% ;)
See you soon
-> -
What is a native file that HP installs or something I need to delete?
Hello
This is part of the HP SW Recovery Manager and is not a virus, inform heuristic to whitelist it.
-
Need some comments on this license I should buy.
I have 2 servers to virtualization in. 2 8 CPU cores to come. We probably 5-6 virtual computer running. I thought I have to go with vSphere Essentials or Essentials but I'm confused about one thing. In the past I have vCenter Server installed on a dedicated server on. Is it an additional license or come Essentials and Essentials Plus with that? Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box? Some have started the installation of the last one I made in measuring and licensing and everything and then I took over. I am very familiar with Veeam and was looking to go down this path and and replicate by using these 2 servers. Is there another function, I need to really consider paying the extra money for the more version?
Thanks in advance,
Keith
Is it an additional license or come Essentials and Essentials Plus with that?
vCenter Essentials is part of the Essentials and Essentials Plus kit.
Can I just install vCenter on a virtual machine on one of the 2 hosts or to be on its own box?
No need to have dedicated host to vCenter server, you can run it in a virtual machine in one of these two ESXi hosts, you're going to have. Just make sure that you have enough resources left to run your production on these hosts workload after your management as vCenter server etc..
with respect to the use of alternatives to backup/replication of third parties who use the vSphere API, Essentials would do the job. Don't consider using Essentials more if you need these good feature as vSphere Hypervisor, vMotion, high availability, Data Protection, - vShield Endpoint, vSphere replication see more at: https://www.vmware.com/products/vsphere/compare#sthash.GZQ46vix.dpuf
So if you spend money on much more, you will then go to third-party solutions for backup/replication, because he will then be part of the solution as you have the right to use vSphere Data Protection (WTP) and vSphere replication as it is.
-
I need some opinions on the conversion of doc and xls to pdf and jpg
Hi all
I'm working on a Java project (so all MS api or .net can not used) where we need to convert MS Office 2003 (first doc but also XLL if possible) files to pdf and jpg. Would be nice to convert txt as well as to fix the indexing research.
Do you have previous experience in the conversion of doc (word files) to PDF?
Searching the Internet I find a lot of links to this Web site dancrintea.ro/doc-to-pdf/, which apparently has a solution for all doc, xls, ppt.
While waiting for a response on this solution, it would be useful that you can share your experience:
-did you do in a Java project
-What did you use and how it works
Never the less important are the costs of the solution because we have to distribute my project to more customers.
so I need something with a balance between costs and results - I want to say can not invest in an expensive solution for doc/xls to pdf format.
Thank you for your sharing information.The answer to that is:
It's hard. Very hard. There are few native Java solutions, your options are:(1) convince you the basic user who. Sucks DOC and RTF's The Way.
2) Open Office script (or office). Open Office has an API that can do what you want
(3) look at the alternative outside and everything, but as a general rule, they are reading rather than rendered data.Cool the OO API has even an example of file conversion.
-
HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer
Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:
PCI serial port
PCI Simple Communications controller
Trusted Platform Module 1.2
Someone please help... Thank you
You are the very welcome.
You need this driver. Install manually if auto installation does not work.
This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.
-
Hi need some help on this router cisco 1921 complete, auto &; half duplex
We have this old 1841 router series and we change in 1921, I still put the same settings, but this two-sided thing is having problem (I think).
We are supposedly to have 20mbps up & download speed using this 1841, and if we use 1921 20down / 10upload speed.
When I put gi0/1 on full-duplex it will descend to the bottom. But if I set auto duplex, it register under the/s and half-duplex and the internet works but only 10 Mbps upload. See below
igabitEthernet0/1 is up, line protocol is up
Material is CN Gigabit Ethernet, the address is 0000000
Description: "connected to this."
The Internet address is 000000
MTU 1500 bytes, BW 100000 Kbit/s, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 13/255
Encapsulation ARPA, loopback not set
KeepAlive set (10 sec)
Half-Duplex, 100 Mbps, media type is RJ45
control output stream is not supported, control of input stream is not supported
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry of 00:00:00, 00:00:00 exit, exit hang never
Final cleaning of "show interface" counters never
Input queue: 0, 75, 14, 10242 (size/max/drops/dumps); Total output drops: 79729
Strategy of queues: fifo
Output queue: 0/40 (size/max)
5 minute input rate 5400000 bps, packets/s 546
5 minute output rate 719000 bps, 390 packets/s
170608043 package, 1963069286 bytes, 79501 no input buffer
Received 477 broadcasts (0 of IP multicasts)
0 Runts, 0 giants, 4 controllers
entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
Watchdog 0, multicast 0, break 0 comments
160510262 packets output, 1965851816 bytes, 0 underruns
0 output errors, 4095435 collisions, 0 resets interface
unknown protocol 0 drops
0 babbles, collision end 0, 0 deferred
carrier, 0 no carrier, lost 0 0 interrupt output
output buffer, the output buffers 0 permuted 0 failuresI really appreciate your comments and thank you
It is very likely that the provider has configured its device for 100 Mbps, which was compatible with the interface of your FE 1841. If you configure the 1921 at a fixed speed of 100 Mbps and full-duplex, it should probably work.
-
I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration. He asks the file AdobePDF.dll since my Vista CD - I do not have. How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8.1, which she did before restoring?
John,
AdobePDF.dll is in the file Data1.cab. Mine is located in C:\Program Files (x 86) \Adobe\Acrobat8\Adobe Acrobat 8 Professional\ You need to extract the file "AdobePDF.dll_64" from the .cab file. You can do this with WinZip or 7-Zip. Everything you need to extract is this file, nothing else... Once you have extracted it, remove the _64, so the name of the file is AdobePDF.dll. Then place the file in any location you want and run the program it when asked. For a file location, I suggest to C:\Program Files (x 86) \Adobe\Acrobat8\
Hope that helps.
-
Why I can't save this file?
Hello!
I'm having some trouble with this file of labview. I want to create a loop of 16 sequences stacked the same controls that includes two linear actuator and valve 12 controls (the files are attached below). Each sequence of the 16 sequential stacked are essentially a duplicate of the same series of the screws. However, I found that economy times become more and more as I approached 16 batteries. For example, the stack of 12, it took about 15 minutes and then the battery 13 he took 20 minutes.
This wouldn't be a problem normally as I have to wait any longer right? No, the 16th cell and while the economy, the program keep alternating between a program not responding and a program that responded to the questionnaire according to the windows Task Manager. The file also can't be registered little matter how long wait. Is this a problem with the computer processing power? or is there a limit on the program labview himself (as the cant have more than 15 stacked sequences, too redundant codes etc.). I use 2013 labview, an NI DAQ usb-6223 (I think) and two engines for this program. I posted a file which contains the motor controls I want to put in each sequence, but also a shortened version of the control valve file.
Kind regards
Gabriel
I suggest you take some LabVIEW tutorials, urgent. I saw that you said "stacked sequence" and then saw that your VI has 4 mb in size (most are<1mb) so="" i="" suspected that="" something="" definitely="" wasn't="">1mb)>
(1) get rid of the structure of stacked sequence. It of a horrible construction and hides most of your code!
(2) the constant button/case structure/true or false is entirely redundant, you can wire all the values to the DAQ assistant, like this:
(3) limit your block for a single screen diagram to the size, I had to scroll a lot of empty space to find your chart!
(4) to lose the screw of assistant DAQ 150 or more and replace them with the appropriate DAQmx functions. You will probably be able to replace all instances of the DAQ assistant with a single DAQmx write 150. Each of these assistants DAQ contains a lot of code to initialize the device, write the data, and then close the device which explains why the VI is 4 MB in size and probably why it runs slowly. You can probably replace the lot in a single while loop & IEA case, according to what you're trying to reach really.
-
original title: require authorization of the SYSTEM
I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own. However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file. I am using an administrator account, but I can't just simply delete the file. I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it. The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there. Thanks for the help.
Hello
Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.
Note: here, "the record" as a subject refers to the folder that you want to remove.
Step 1: Go to the built-in Administrator account, you can do so by following these steps:
a. go to control panel > system and security > administrative tools
b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
c. right click on the administrator account that appears in the list and select Properties
d. uncheck "account is disabled" and confirm by pressing OKStep 2: Connect to your newly activated administrator account
Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
I'm going to make the assumption that you want to remove a folder and all its subfolders along
a. right click on the folder
b. go to the security on the top tab
c. click on the Advanced button which is at the bottom: Step 4 the first part to configure security settings to set the owner of the folder:
a. go to the owner on the top tab
b. click the button change located downstairs
c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
(d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
-Click on the button "other users or groups...". "who's down
-Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
-Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
-Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
f. check 'Replace the owner of subcontainers and objects' to propagate our change
g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see youStep 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
b. go to the permissions on the top tab
c. click on the button "Change permissions" which is down
d. at the bottom, there should be 2 check boxes:
-' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
-' Replace all permissions of child object with permissions inheritable this object': check this
e. press OK to confirm. Windows will warn you this time; Click OK
f. reconfirm by pressing OK; now, you should get to properties againNow, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it. -
I need it to do some automation to Excel to PDF. Which product is this file or where I can get it?
The correct function is "CreateObject" - you misspelled it.
-
I said 'yes' to a box with a question that came
' Some files needed to accurately preview this page have been changed but not saved. Save now? "
I had already experienced with the creation of text boxes (divs?) and what makes them different colors so I could see the difference, but now I managed to transform not only one, but ALL of my precious site pages in pink pandemonium - how can I fix it despite the fact that the coding is very well and does not correspond to what I have now on my pages... An example is attached...
I have what looks like a bug, because it affects all pages.
Sounds like the file that your linked css file save you when you are prompted. Only one css file that is linked to all pages would change all your web pages. You will then need to open that and then make the changes in this file in contrast to those that you saved by mistake.
I suspect that you used the Panel css Design to make your css revisions in order to revert the changes through that and then save the css file.
-
Original title: this file does not have a program associated with it for performing this action... etc.
cannot open attachments to emails or some document files, like the downloaded videos or greeting cards. I tried the exe file. thing and it is already in my folder of files. Need a fix. Had this problem 2 months ago and that's where the exe. has been applied. Has worked since then until today.
Hello
1. what changes have been made to your computer before the problem?
I suggest that you follow these steps and check to see if they help.
Step 1:
If the problem occurred recently, perform the System Restore to the point that your computer was working normally.
Step 2:
Test the issue in a new user account and check if the problem persists.
-
File destination Access Denied you need permission to perform this action
I am trying to create a new folder on my desktop in windows 8 & remove some old files & shortcuts on the desktop, but I get the message Destination appears next folder Access Denied you need permission to perform this action.
I am the owner of the laptop & my account says: I am an administrator.
Help, please.
Make sure that your files are not on 'Read only' by exploring their properties. Note that for shortcuts, view the properties of the shortcut so the file root.
Ashwin0
-
I bought cs6 design web premium, I need some somware to open the file "7z".
I bought cs6 design web premium, I need some somware to open the file "7z".
You can view the applications download Creative Suite 6 to download the software. To open the 7z file, you can download WinRAR from WinRAR download and support: download
Hope this will help you.
Concerning
Hervé Khare
Maybe you are looking for
-
I just bought I phone 5 s there a person two days but when im use it become very hot
Hello I bought I phone Go to 5S 32 of a person on Kijiji works fine but when I use the phone gets very hot. also I want t know if it is fake or not. the serial number is C3 * RC9 MODEL MF357X / A VERSION 9.2 (13C75) IMEI *. PLEASE HELP ME CORDIALLY S
-
Software download for DCR - SX43 does not work
I'm fighting for the PMB software for my camera. I've upgraded to a new computer & can't find my original disks of the camera. I have a DCR-SX43 camera & run Windows 7-64 bit OS. I tried several times to download the exe file which should install PMB
-
Camera, followed by problem - prevents the target centered
Hi, I'm working on a project as part of my studies building and programming a machine gun. I have a prototype built and tested with R/C and I have no problem tracking stuff when the unit is static (mounted on the chassis or next to the platform). Wha
-
I get this error message when I check the updates on my 3 Surface: Driver HP update for HP LaserJet Professional CP1520 Series PCL 6 - error 0 x 80240017 However, I have no installed printer HP software. I don't own an HP printer. I tried a lot of so
-
"Unable to connect" K1 to Netflix
I seem to have more than one application that can not find an internet connection on my K1. Netflix is the biggest offender. (I'm not going to assume the problem with the game IceAge I just download for kids I have is connected immediately, but also,